Commonly found in Chinese carrier boxes.
Cause: Wi-Fi driver mismatch.
Fix: This is the most common problem. You must locate firmware with your exact Wi-Fi chip. Use a file explorer with root access and check /system/etc/wifi/ – look for fw_bcmdhd.bin or similar. Then search online for S905L2 + [your Wi-Fi chip] firmware.
Popular driver packages:
Plug in HDMI and power. First boot takes 5–8 minutes. If it stays on logo for >15 minutes, re-flash with "Erase Bootloader" checked.
Step 1: Install the Tool Download and install the Amlogic USB Burning Tool on your PC. Open the tool.
Step 2: Load the Firmware
In the tool, click File > Import Image. Select the .img firmware file you downloaded earlier. Wait for it to verify.
Step 3: Prepare the TV Box Connect the TV box to power (HDMI not required). Connect the box to your PC using a USB cable (preferably plug it into the USB port closest to the SD card slot or HDMI port).
Step 4: Enter Upgrade Mode You need to force the box into "Mask ROM" mode so the PC recognizes it.
Step 5: Start Burning Once the USB Burning Tool shows a "World Device" or "HUB Device" status on the right side, click the "Start" button in the top menu.
Step 6: Boot Up Connect the box to your TV and power it on. It should boot into the new firmware.
