Astm D595798 Pdf Free -
If you are an architect or engineer, here is a typical Division 7 specification language:
SECTION 07 19 00 – WATERPROOFING
3.5 FLOOD TESTING
A. Perform flood testing in accordance with ASTM D5957-98 (Reapproved 2017).
B. Test all horizontal waterproofing areas prior to placement of cover boards, pavers, or topping slabs. astm d595798 pdf free
C. Temporarily plug drains with non-corrosive, non-staining test plugs.
D. Flood each designated area with clean potable water to a minimum depth of 2 inches (50 mm) at the shallowest point.
E. Maintain water depth for minimum 24 hours, replenishing as needed.
F. Inspect underside of deck for leakage at 2-hour intervals during first 8 hours, then at 24 hours. If you are an architect or engineer, here
G. Any evidence of water penetration (drips, dampness, staining) constitutes failure.
H. Upon failure, Contractor shall drain area, allow membrane to dry, repair, and retest per same procedure at no additional cost.
I. Submit written test report with date, time, depth log, inspector’s name, photographs, and pass/fail determination.
If you are a student, faculty member, or employee at a university or large engineering firm, check your library’s database: SECTION 07 19 00 – WATERPROOFING 3
Log in via your institution’s proxy to download the official PDF for free.
ASTM occasionally allows one-time free access for research or review via their website for 24 hours. Visit www.astm.org, search D5957-98, and look for “Request a free preview” (availability varies).
If you cannot obtain ASTM D5957-98, consider these legally free or lower-cost alternatives:
| Standard | Focus | Cost | |----------|-------|------| | ASTM D5957-98(2017) | Updated reaffirmation (same technical content) | ~$60 (ASTM) | | ANSI/AAMA 501.2 | Flood testing of fenestration and curtain walls | Free for AAMA members | | ICC-ES AC79 | Acceptance criteria for below-grade waterproofing (free PDF via ICC) | Free | | BS 8102:2009 | UK standard for waterproofing (summary available) | ~£30 |