Canon Ir1024 Default Admin Password 🔥 Full HD

You are likely clicking "User Mode Login" (which is for department IDs) instead of "System Manager Mode Login" . Look for the radio button or link labeled "Administrator Login."

The Canon IR1024 default admin password is almost universally 7654321 for both the System Manager ID and the password. If that fails, try 1234567 or use the hard reset method described above.

This legacy machine still powers thousands of offices worldwide because it is a workhorse. However, its security model is outdated. After recovering access, immediately change the default credentials—but ensure you store them safely.

If you are responsible for multiple Canon devices, we recommend creating a spreadsheet of IP addresses, admin IDs, and passwords. For the IR1024 specifically, never rely on memory alone. The seven-digit descending pattern seems intuitive until the day it stops working, and you find yourself locked out of your own printer at 4:45 PM on a Friday.

Now that you know the default and the recovery steps, go ahead and reclaim control of your Canon IR1024.

The Canon iR1024 is a multifunctional printer that has been widely used in various settings for printing, copying, and scanning documents. Like many network devices, it comes with a default administrator password that allows users to access and configure its settings.

However, the default admin password for the Canon iR1024 is not widely documented and can vary depending on the specific model and firmware version. In general, it's common for manufacturers to set default passwords as "admin" or "password" for such devices, but these can often be changed during the initial setup.

For the Canon iR1024, some common default admin passwords that have been reported include:

For security reasons, you are encouraged to change the default admin password to a more secure one as soon as possible. This helps prevent unauthorized access to the device's settings and protects sensitive information.

If you've forgotten the current admin password or are trying to reset it, you may need to:

Securing your device with a strong password is a crucial step in maintaining network security and protecting your data. For detailed instructions on how to change or reset the admin password for your Canon iR1024, I recommend referring to the official Canon support resources or contacting their customer service directly.

The default admin password for the Canon imageRUNNER 1024 (iR1024) is typically part of the System Management ID settings set at the factory. Default Credentials System Manager ID: System Manager PIN (Password): Canon User Manual

Note: These credentials are used for both the local machine operation panel and the Remote UI (network management). How to Log In (Control Panel) Settings/Registration (Gear icon) key on the operation panel. Management Settings System Management Settings Enter the default ID and PIN ( ) and select Canon User Manual How to Change the Default Password (Recommended)

Because "7654321" is a public default, you should change it immediately to secure your network. Canon User Manual Navigate to Settings/Registration Management Settings User Management System Manager Information Settings System Manager ID and PIN Enter a new ID and a new 7-digit (or less) PIN. Confirm the new PIN and press Canon User Manual What to Do If the Default Doesn't Work

If the default password fails, it has likely been changed. To resolve this: Check Serial Number:

Sometimes, on smaller models, the default password is the printer's serial number. System Information:

Select "System information" on the operation panel and select "Show password" (if available in your region). Factory Reset:

You may need to clear the password using service mode. Access this by pressing

(or similar "Clear password" option), then restarting the machine. Contact Service:

If the management settings are entirely locked out, you must contact your local authorized Canon dealer, as they can reset the system password. Important Notes Remote UI Limitations:

For security reasons, you cannot log in to the Remote UI (browser-based management) using the default

password. You must change it from the physical control panel first. Active Directory:

If your machine is part of an Active Directory setup, the authentication method might be different. Canon User Manual Starting the Remote UI - Canon - imageRUNNER C3326i / C3326

The default credentials for the Canon imageRUNNER 1024 (and most enterprise-grade imageRUNNER models) are: System Manager ID: 7654321 System Manager PIN: 7654321 🔑 Troubleshooting Login

If the standard ID/PIN does not work, try these secondary defaults or steps: Username: Administrator (Case sensitive) Password: 7654321

Check the sticker: Look near the serial number on the back/bottom for a "PWD" label .

Firmware variation: On some newer firmware, the password is the device's 9-character Serial Number . 🛠️ How to Reset the Password

If the defaults were changed and you are locked out, you can often reset them via Service Mode: Press Additional Functions (or Settings/Registration).

Enter Service Mode (common sequence: press 2 and 8 simultaneously, then Additional Functions again). Navigate to Copier > Function > Clear. Select PWD-CLR (or Clear Password) and press OK .

Restart the printer. It should return to the factory default "7654321."

💡 Quick Tip: For security, always change these defaults immediately after logging in. You can do this under Management Settings > User Management > System Manager Information Settings . If you'd like, let me know:

If you are trying to log in via the physical panel or the Remote UI (web browser).

If you need the steps for a specific task (like setting up Scan-to-Email). If the printer is showing a specific error code. Changing the System Manager ID and PIN - Canon

Press (Settings/Registration). Press . Make the necessary changes to the System Manager settings, and press . Canon User Manual System Manager ID and PIN Factory Default Settings

The default administrator credentials for the Canon imageRUNNER (iR) 1024 series, including the , , , , and , typically use the following factory settings:  User Name: Administrator (case-sensitive, capital "A") Password: 7654321  Alternative Credentials 

Depending on your specific network configuration or firmware version, you may need to try these variations:  System Manager ID/PIN: Both are set to 7654321 by default.

Lower-case Admin: Try admin as the username with 7654321 or Printix as the password. Legacy Defaults: Older models sometimes used 12345.

Device Serial Number: On some Canon models, the administrator password is the printer's serial number, which is found on a sticker at the back of the machine.  How to Log In 

On the printer's control panel, press the Settings/Registration button. Select Log In on the touch screen. Enter the Administrator username and the password 7654321.

If successful, the system will prompt you to change the password for security.  How To Find Admin Password of Canon Printer !!

The default administrator credentials for the Canon imageRUNNER 1024 (and similar iR series models) are as follows: System Manager ID: 7654321 System Password / PIN: 7654321 Accessing Admin Mode

To log in and modify system settings on the device control panel: Press the (Settings/Registration) button.

Use the numeric keypad to enter the ID (7654321) and Password (7654321). Press ID or Log In. Remote UI Access

If you are accessing the printer via a web browser (Remote UI), the default credentials typically follow the same pattern: User Name: Administrator Password: 7654321 Security Recommendations

Change Default Credentials: For security, it is highly recommended to change the default password immediately to prevent unauthorized access to network and security settings.

Alternate Passwords: If 7654321 does not work, some Canon models may use the serial number of the device (found on a sticker at the back) or the lowercase word canon as a default.

If you have forgotten a previously changed password, you may need to contact a local authorized Canon dealer for a service reset. Logging in as an Administrator - Canon User Manual

The default administrator credentials for the Canon imageRUNNER 1024 (iR1024) series typically consist of System Manager ID System Manager PIN Default Credentials

For the majority of Canon imageRUNNER devices, including the , the factory default settings are: System Manager ID System Manager PIN Canon Knowledge Base

In some interface configurations, you may be prompted for a username and password instead: : Administrator Canon User Manual How to Log In To access administrator settings on the device: Logging in as an Administrator - Canon User Manual

The default credentials for the Canon imageRUNNER (iR) 1024 series, which includes the iR1024A, iR1024F, and iR1024i, are typically as follows: System Manager ID: 7654321 System Manager Password (PIN): 7654321 Accessing the Admin Menu To use these credentials on the machine's operation panel:

Press the Additional Functions key (often indicated by a head-and-shoulders icon or a gear). Navigate to System Settings.

When prompted, enter the System Manager ID (7654321) and System Manager PIN (7654321) using the numeric keypad. Web Interface (Remote UI) Login

If you are accessing the printer via a web browser (Remote UI): User Name: Administrator Password: 7654321 Common Alternatives

If the credentials above do not work, consider these variations used by other Canon models:

Serial Number: For some newer firmware versions, the default password is the machine's serial number, which can be found on a sticker at the back of the device.

Simple Credentials: On older or specific regional firmware, try 1234567 or admin. Troubleshooting and Resets

If the default password has been changed and you cannot log in, you may need to clear the password through Service Mode. This process is generally reserved for technicians: Logging in as an Administrator - Canon User Manual

The flickering fluorescent lights of the IT basement hummed in a low, mocking drone as Marcus stared at the Canon imageRUNNER 1024. To anyone else, it was just a beige box that smelled of ozone and hot paper. To Marcus, it was a gatekeeper holding his afternoon hostage.

His boss needed the quarterly reports scanned and emailed by 5:00 PM. It was 4:42 PM.

"Come on, you glorious relic," Marcus muttered, tapping the System Monitor button. The small LCD screen blinked back at him, demanding a System Manager ID and System PIN.

He tried the obvious first: 1111 for both. Invalid.He tried 1234567. Invalid.He even tried admin and password, knowing full well this machine was built before the world decided those were bad ideas. Access Denied.

The silence of the basement was broken only by the sound of a ticking clock. Marcus pulled out his phone, his fingers flying across the screen as he searched for the digital skeleton key. He found an old forum thread from 2009 where a user named TonerTom had posted the "sacred" factory settings for the iR1024 series. "Okay, Tom, don't let me down," Marcus whispered.

He leaned over the keypad and punched in the magic numbers: 7654321 for the ID, and 7654321 for the PIN.

He held his breath. The machine whirred, a mechanical "thunk" echoed from the paper tray, and the screen transformed. [System Management Mode] appeared in blocky, triumphant text.

Marcus didn't waste a second. He configured the SMTP settings, slammed the reports into the ADF (Auto Document Feeder), and hit the green Start button. The machine sang as it pulled the pages through, digitizing the data and flinging it into the cloud just as the clock struck 4:58 PM.

As the "Sent" confirmation flashed on the screen, Marcus patted the top of the scanner. "Good talk, Canon. See you next quarter."

The Device: Canon iR1024 (a multifunction printer/copier/scanner/fax) The Default Admin Password (for models with a dedicated admin menu): Often 7654321 (yes, descending keypad) or sometimes left blank, or 00000000 on older Canon copiers.

This erases all settings (network, address book, counters) – use only if you’re desperate.

Steps:

Warning: This also clears your network settings. You’ll need to reconfigure the IP address afterward via the control panel.

Once you regain access, change the password immediately:

Via Control Panel:

Via Remote UI:

You have three options: