Matikan HP. Tekan dan tahan kedua tombol Volume Up + Volume Down bersamaan, lalu colokkan kabel USB ke PC.
Atau jika tidak berhasil: buka UnlockTool → pilih Realme → EDL Mode → ikuti petunjuk.
Wait for green "Pass" or "Flash Done" message. This takes 3–5 minutes.
Note: If you get an error like STATUS_BROM_CMD_STARTCMD_FAIL, reinstall drivers, change USB port, or try a different USB cable.
| Problem | Solution |
|--------|----------|
| Device not detected | Use USB 2.0 port. Install MTK drivers again. Try another cable. |
| S_BROM_CMD_STARTCMD_FAIL | Restart UnlockTool, reboot PC, enter BROM mode again quickly. |
| Flashing stuck at 0% | Ensure Preloader is unchecked. Use "Download Only" mode. |
| Phone boots to Recovery | Perform a factory reset via stock recovery. |
UnlockTool communicates with the Realme 5i via MediaTek’s BROM (Boot ROM) mode. Here’s how to enter it:
Once detected, UnlockTool will show "Connected" and the device info (e.g., MT6765V).
Flashing firmware on a Realme 5i (codenamed RMX2030) is often necessary to fix boot loops, remove FRP (Factory Reset Protection), downgrade software, or unbrick the device. UnlockTool is one of the most reliable tools for this purpose, especially for MediaTek-powered devices like the Realme 5i.
This guide provides a safe, professional walkthrough.
Warning: Flashing will erase all data on your phone (unless you select a "Download Only" or "Keep Data" option). Proceed at your own risk. Ensure your battery is above 60%.
Install UnlockTool:
Extract Firmware:
Cara - Flash Realme 5i Via Unlocktool
Matikan HP. Tekan dan tahan kedua tombol Volume Up + Volume Down bersamaan, lalu colokkan kabel USB ke PC.
Atau jika tidak berhasil: buka UnlockTool → pilih Realme → EDL Mode → ikuti petunjuk.
Wait for green "Pass" or "Flash Done" message. This takes 3–5 minutes.
Note: If you get an error like STATUS_BROM_CMD_STARTCMD_FAIL, reinstall drivers, change USB port, or try a different USB cable.
| Problem | Solution |
|--------|----------|
| Device not detected | Use USB 2.0 port. Install MTK drivers again. Try another cable. |
| S_BROM_CMD_STARTCMD_FAIL | Restart UnlockTool, reboot PC, enter BROM mode again quickly. |
| Flashing stuck at 0% | Ensure Preloader is unchecked. Use "Download Only" mode. |
| Phone boots to Recovery | Perform a factory reset via stock recovery. | cara flash realme 5i via unlocktool
UnlockTool communicates with the Realme 5i via MediaTek’s BROM (Boot ROM) mode. Here’s how to enter it:
Once detected, UnlockTool will show "Connected" and the device info (e.g., MT6765V). Matikan HP
Flashing firmware on a Realme 5i (codenamed RMX2030) is often necessary to fix boot loops, remove FRP (Factory Reset Protection), downgrade software, or unbrick the device. UnlockTool is one of the most reliable tools for this purpose, especially for MediaTek-powered devices like the Realme 5i.
This guide provides a safe, professional walkthrough. Wait for green "Pass" or "Flash Done" message
Warning: Flashing will erase all data on your phone (unless you select a "Download Only" or "Keep Data" option). Proceed at your own risk. Ensure your battery is above 60%.
Install UnlockTool:
Extract Firmware: