Once the chaser che80 print driver is installed, fine-tune it for your specific media.
The Chaser CHE80 print driver is essential for reliable operation. While the manufacturer-supplied driver is optimal, technicians should be aware that the underlying hardware may support industry-standard emulation modes (such as ZPL or EPL). If the proprietary driver is corrupted or lost, utilizing Seagull Scientific drivers or generic text drivers is a viable secondary solution to restore printing capability.
Navigate to the official support portal (typically www.xmchaser.com or the regional distributor's site). Use the search bar for "CHE80." You are looking for a .zip file containing:
Q: Does the Chaser CHE80 work on ChromeOS?
A: ChromeOS uses CUPS. You will need the PPD file from the driver pack. Add the printer via "CUPS" using the CHE80.ppd file. chaser che80 print driver
Q: My receipt prints, but the cash drawer doesn’t open. A: This is a driver command setting. In POS software, ensure the "Open Cash Drawer" command is set to (ESC | p | 0 | 10 | 100). Or, test via Printer Properties > Device Settings > Cash Drawer: Enabled.
Q: Can I use the Chaser CHE80 print driver on a 64-bit Windows with 32-bit POS software? A: Yes. Install the 64-bit driver, then in POS software, you may need to enable "File->Print Setup" and select the printer. If issues persist, use the "Generic / Text Only" driver as a fallback.
Q: The driver says "Offline" even though the light is green. A: Right-click the printer > "See what’s printing" > Printer menu > Ensure "Use Printer Offline" is unchecked. Also, check the USB cable—the CHE80 requires a high-quality shielded cable. Once the chaser che80 print driver is installed,
Warning: Avoid third-party "driver updater" websites. They often bundle adware or outdated drivers. Always use official sources.
Once installed, the driver properties must be tuned to the specific media being used to prevent alignment issues.
Critical Configuration Parameters (Device Settings Tab): Navigate to the official support portal (typically www
| Setting | Function | Recommended Action | | :--- | :--- | :--- | | Paper Size | Defines label dimensions. | Set to exact label width and height. Do not rely on "Auto." | | Print Mode | Selects media type. | Select Thermal Transfer (ribbon) or Direct Thermal (no ribbon). | | Sensor Type | Detects label gaps. | Select Gap/Notch for standard stickers; Continuous for receipt paper. | | Darkness/Speed | Controls burn intensity. | Start at default; increase darkness if print is faint; decrease speed for fine details. |
If you are setting up a Chaser CHE80 printer and struggling to locate the correct software, you aren't alone. Because the Chaser brand is often associated with specialized POS (Point of Sale) or thermal printing hardware, the drivers can sometimes be harder to find than standard office printers.
Here is a complete guide to getting your CHE80 up and running.