Modern Mitsubishi Pajero Sport vehicles are equipped with complex electronic control units (ECUs). When the message “Electrical system service required” appears on the instrument cluster, it indicates a detected fault within the vehicle’s electrical network. This paper explains this warning and clarifies the meaning of “install” (Indonesian: artinya install) in relation to the warning.

If the warning appears after an installation:

| Action | Detail | |--------|--------| | DIY possible | Battery cleaning, replacement, terminal tightening | | Requires scan tool | Clearing codes, battery sensor reset | | Go to specialist | If alternator or wiring harness issue |

If “Electrical System Service Required” appears after installing accessories (lights, sound system, dashcam) – you may have caused a parasitic draw or voltage drop. Check your installation ground and fuse taps.


Mitsubishi released technical service bulletins (TSB) regarding false "Electrical System Service Required" warnings on early Pajero Sport models (2016-2019). The fix is a software installation.

Q: Can I just ignore the "Electrical System Service Required" warning? A: No. Eventually, your battery will die completely, or the ISG system will fail. Worse, low voltage can damage the expensive injectors and transmission control module.

Q: Why did this appear immediately after I installed a new radio? A: You likely triggered a voltage spike during installation. Double-check your ground connection. If the radio draws power from the wrong source (not the ACC circuit), the BMS sees the drain when the car is off. You need to re-install the radio's constant power wire.

Q: Does this error affect fuel consumption? A: Yes. When the BMS thinks the electrical system is failing, it disables Idle Stop & Go to prevent the car from not restarting at a light. You will use more fuel in city traffic.

Q: "Artinya saya harus ganti alternator?" (Does it mean I must replace the alternator?) A: Tidak selalu (Not always). Most of the time (90%), it is just the battery or battery sensor. Only replace the alternator if the charging voltage is unstable.