The "updated v1052" release is usually a leaked engineering tool not intended for public distribution. While using it to repair your own hardware is typically considered fair use, deploying it to fraudulently increase capacity (i.e., creating fake drives) violates consumer protection laws worldwide. Always use MPTools to correct capacity, not inflate it.
FirstChip is a Chinese semiconductor company that produces low-cost, high-compatibility USB 2.0 and USB 3.0 controllers. The FC1178 and FC1179 are two of their most ubiquitous chipsets found in budget flash drives (brands like PNY, Kingston DataTraveler SE9, ADATA, and generic eBay drives).
If you share your flash ID (from ChipGenius) and exact drive model, I can give more specific settings for v1052 or recommend the best newer tool version.
FirstChip FC1178/FC1179 MPTools v1.05.2 Updated Guide
Introduction
The FirstChip FC1178 and FC1179 are popular chipsets used in various devices, and MPTools is the software utility used to manage and configure these chipsets. This guide provides a comprehensive overview of the MPTools v1.05.2 software, focusing on the FC1178 and FC1179 chipsets.
System Requirements
Before using MPTools, ensure your system meets the following requirements:
Installation
MPTools Interface
The MPTools interface is divided into several sections:
Connecting to the Device
To connect to the device:
Firmware Operations
MPTools allows you to perform various firmware operations:
Configuring Settings
MPTools allows you to configure various settings:
Troubleshooting
Common issues and solutions:
Conclusion
This guide provides a comprehensive overview of the MPTools v1.05.2 software for the FirstChip FC1178 and FC1179 chipsets. By following this guide, you should be able to successfully configure and manage your device using MPTools. If you encounter any issues, refer to the troubleshooting section or contact FirstChip support for further assistance.
FirstChip FC1178/FC1179 MpTools V1.0.5.2 (released June 2022) is a specialized low-level formatting utility used to recover or "re-manufacture" USB flash drives using FirstChip controllers. It is widely used by the tech community to repair drives that show zero capacity, are "write protected," or are fake drives with inflated capacities. Key Features & Updates in V1.0.5.2 Expanded Chip Support : Specifically optimized for
series controllers, often found in unbranded or budget USB sticks. Improved NAND Support
: Better compatibility with modern TLC and QLC NAND flash memory, allowing for more stable low-level formatting. True Capacity Restoration
: Critical for "fake" drives; the tool scans the physical flash cells and reverts the drive to its actual hardware capacity (e.g., reverting a fake 128GB drive to its real 32GB). Deep Review: Usage & Performance
Based on technical documentation and user feedback from platforms like Interface Complexity
: The software often launches in Chinese by default. Users must typically click the "Settings" button (which may require a blank password or ) to switch the language to English. Scanning Modes Clear Scan : Used for quick repairs of file system errors. Low-Level Format (2-Stand Scan)
: A deep, destructive scan that marks bad blocks. This is the most effective mode for un-bricking a "dead" drive but can take several hours depending on capacity. Reliability
: Success rates are high for "VendorCo ProductCode" devices. However, users report that while it fixes the drive, it frequently exposes the low quality of the hardware, often resulting in a significant reduction in reported storage size. Crucial Recovery Steps Identify the Chip ChipGenius
first to confirm your controller is indeed an FC1178 or FC1179. If the chip doesn't match, this tool may permanently brick the device. Backup Data
: This tool performs a "factory reset" at the controller level; all data will be permanently erased Use Quality Cables
: Avoid USB hubs. Connect the drive directly to a motherboard USB port to prevent power-loss during the writing of new firmware. Are you trying to repair a specific error (like "Write Protected") or are you trying to verify the real capacity of a suspicious drive?
FirstChip FC1178/FC1179 MPTools (v1.0.5.2) is a specialized "Mass Production" software used to repair, re-format, or restore USB flash drives that use FirstChip controllers. This tool is typically used to fix "No Media" errors, restore factory capacity, or repair corrupted firmware. Essential Preparation Identify Your Controller
: Before using any MPTool, verify that your USB drive actually uses the controller. Use a diagnostic tool like ChipGenius to confirm the Controller Part-Number Backup Data : Using MPTools will permanently erase
all data on the flash drive as it re-initializes the NAND memory. How to Use MPTools v1.0.5.2 Download and Launch
: Locate the specific MPTool version for your controller. Authoritative technical archives like often host these firmware files.
: Plug in your USB drive. The tool should automatically detect it and display information in one of the numbered slots. Configuration (sometimes requiring a password, often blank or '123456'). to the one identified by ChipGenius.
Select the appropriate Scan Mode (e.g., "Product" for a standard repair). Repair Process : Press the
button. The tool will begin flashing the firmware and marking bad blocks on the NAND. Completion
: Once the progress bar reaches 100% and shows a "Succeed" or "OK" message, safely unplug and re-insert the drive to verify the fix. Common Troubleshooting Not Recognized
: If the tool doesn't see your drive, try a different USB port (preferably a 2.0 port) or run the software as an Administrator. "Unknown Flash"
: If the tool identifies the drive but lists it as "Unknown Flash," ensure your version of MPTools supports your specific NAND Flash ID. Fake Capacity
: If your drive was a "fake" high-capacity drive, this tool will likely restore it to its actual true storage Are you experiencing a specific error code
like "No Media" or "Write Protected" that I can help you target?
This guide provides instructions for using FirstChip MpTools V1.0.5.2 to recover or repair USB flash drives based on the FC1178 and FC1179 controllers. This tool is primarily used to fix "No Media" errors, restore actual capacity to fake drives, or repair corrupted firmware. 1. Preparation & Identification
Before using the mass production tool, you must confirm your hardware specifications.
Identify the Controller: Use ChipGenius to find your Controller Part-Number and Flash ID.
Compatibility: This version (V1.0.5.2) supports FC1178 (3D, BC) and FC1179 (S, AB) series.
Backup: Ensure no important data remains on the drive; this process erases all data permanently. 2. Initial Setup Extract & Launch: Unzip the software and run FCMpTools.exe.
Select Product Type: A "Product Type" window will appear. Leave the settings at their default values and click OK.
Language Change: The default interface is Chinese. In the right-hand column, find the Language section and select English. 3. Repair Process (Step-by-Step)
If your drive is not showing the correct capacity or has corrupted firmware, follow these recommended scanning steps: Step A: Standard Scan firstchip fc1178 fc1179 mptools v1052 updated
Go to Settings (Password is often blank or 320, though some versions don't require one). Set Scan Mode to Standard Scan.
Click OK, then click Start on the main screen. Wait for it to reach roughly 1% or finish, then click Stop. Step B: Factory Scan (True Capacity Recovery) Return to Settings.
Change the mode to Factory Scan (or "Clear + Factory Scan" for stubborn drives).
In the Bin tab, ensure the flash ID matches the one identified by ChipGenius.
Click Start. This process can take anywhere from 30 minutes to several hours depending on the drive's health and size. 4. Common Troubleshooting Issue Potential Solution Drive Not Detected
Try a different USB port (preferably USB 2.0) or an older version of MpTools. Capacity Too Small
The drive may have had fake capacity. The tool identifies "bad blocks" and restores the drive to its actual physical NAND size. Settings Password Common passwords for FirstChip tools are blank or 320.
Actionable Tip: If the drive fails after multiple attempts, it may be "kaput" (physically damaged beyond software repair). For more advanced files and older versions, visit the FirstChip Files Repository on USBDev.ru. FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
FirstChip FC1178/FC1179 MpTools V1.0.5.2 (released 2022-06-01) is a specialized mass production (MP) utility used to repair, reformat, and restore USB flash drives based on FirstChip FC1178 and FC1179 controllers. It is most frequently used to fix "fake" drives or unreadable devices often found on sites like AliExpress. Key Features & Capabilities
Controller Support: Primarily targets FC1179, FC1179S, and FC1179AB, with backward compatibility for many FC1178 variants.
Restoration: Capable of restoring the "true" capacity of fake flash drives (e.g., reverting a fake 2TB drive to its actual 32GB or 64GB hardware limit).
Scanning Options: Includes advanced scan settings like "Clear" and "Stand Scan" to handle bad blocks and firmware errors.
Multi-language Support: While the interface often defaults to Chinese, it typically includes an English toggle on the right-hand panel. Common User Feedback
Effectiveness: Users on forums like USBDev.ru and FlashBoot.ru report high success rates in "reviving" dead drives that show as "0 bytes" or "unreadable". Ease of Use Issues:
Language Barrier: The initial setup is often in Chinese, requiring users to click through options until they find the English toggle.
Password Protected: Accessing advanced "Settings" often requires a password. Common defaults found in community discussions include 320, 123456, or leaving it blank.
Capacity Shrink: Several reviewers noted that after a successful scan, the drive's reported capacity dropped significantly (e.g., from 128GB to 30GB), which is generally the tool correctly identifying the real NAND chip size rather than a bug. Technical Tips for Best Results
Version Selection: If V1.0.5.2 does not recognize your drive, older versions like V1.0.3.14 or newer releases (such as the 2024 versions) are sometimes recommended as alternatives for specific chip batches.
Manual Settings: Setting "Scan Level" to Clear followed by a Factory Scan is a common community-recommended sequence for particularly stubborn drives.
Identification: Before using the tool, verify your controller using a tool like ChipGenius to ensure it is actually a FirstChip device.
If you'd like, I can help you find the default password or specific settings for your drive if you tell me the exact error you are seeing (e.g., "No Media" or "Write Protected"). FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
FirstChip FC1178/FC1179 MPTools V1.0.5.2 is a specialized mass production (MP) utility used for the low-level formatting, firmware flashing, and repair of USB flash drives equipped with FirstChip controllers
. This updated version, released on June 1, 2022, serves as a comprehensive tool for both the
series chips, which are commonly found in budget-friendly or generic USB drives. Key Updates and Improvements in V1.0.5.2
The V1.0.5.2 update introduced several critical stability and performance enhancements: Enhanced Flash Support : Improved support for the latest master controllers and optimized speed priorities for Stability Fixes : Addressed stability issues with
memory and improved the "open card" (initial formatting) yield for Bug Resolutions : Fixed issues where some
flash chips would report errors or fail to show full capacity after formatting. New Features
: Added customizable "lock disk" features and enhanced the interface to display current configuration names. Primary Use Cases
MPTools are primarily used by technicians and advanced users for: Repairing "No Media" Errors
: Fixes drives that are recognized by Windows but show as having no storage capacity due to corrupted firmware. Restoring Actual Capacity
: Detects and fixes "fake" USB drives that report higher storage than they actually have by performing a deep scan and re-indexing the NAND memory. Low-Level Formatting
: Manages bad blocks on the memory chip, sequestering damaged areas so the rest of the drive remains usable. Customization : Allows users to change the VID (Vendor ID) PID (Product ID) , and serial numbers of the drive. How to Use FirstChip MPTools Before starting, use a tool like ChipGenius to confirm your drive uses a FirstChip controller. Initial Setup FCMpTools.exe
. The interface may load in Chinese by default; look for the toggle in the top right or side panel to switch to : In the settings, you can choose between Standard Scan for basic repairs or Factory Scan for deep, low-level resets. Binning & Optimization
tab allows you to set the target capacity or optimization level (e.g., speed vs. stability). to begin the flashing process.
This process permanently erases all data on the drive and cannot be undone.
Using the wrong firmware or settings in MPTools can permanently "brick" your USB drive. It is recommended to use these tools only if the drive is already failing or unusable. You can find more detailed documentation and downloads at , which tracks these controller updates extensively. before using this tool?
The FirstChip FC1178/FC1179 MPTools V1.0.5.2 is a specialized mass production (MP) utility used to repair and manage USB flash drives powered by FirstChip controllers . This updated version, released around June 2022, serves as a universal tool supporting both the FC1178 and FC1179 chips simultaneously . Key Features and Updates
This version introduced several critical improvements for drive stability and flash compatibility:
Expanded Flash Support: Added compatibility for various flash types, including 8M2A, 8M2C, 8M3M, 8M2B, and TDG8T2D .
Performance Improvements: Optimized read and write speeds specifically for the FC1179 controller . Bug Fixes:
Resolved data loss issues where 1MB of data would disappear after formatting on certain copy machines .
Fixed a "mass production crash" that occurred with specific dual-paste configurations (9t23, L06B) .
Addressed Error Code 6 issues affecting some multi-die flash drives using the FC1178 chip .
Yield Optimization: Improved "open card" and contrast yield for Micron and Intel 3D Flash, as well as 8t23 and 8t22 bin grades . Common Uses
The tool is primarily used by technicians and DIY users to fix the following USB errors:
No Media/Write Protection: Restores drives that show up as "No Media" or are locked in read-only mode .
Capacity Restoration: Corrects "fake" or corrupted capacity reporting to reflect the actual NAND storage size .
Firmware Corruptions: Re-flashes the internal controller firmware to fix unrecognized or non-functional drives . Basic Usage Guide To use the tool effectively, follow these general steps:
Identify Your Controller: Use a tool like ChipGenius to confirm your drive uses a FirstChip FC1178 or FC1179 controller .
Launch the MPTool: Run the FCMpTools.exe file. If the interface is in Chinese, look for a dropdown menu in the top-right corner to switch to English . Configure Settings:
Select "test rack Sorting" for initial testing or "finished Open card" for the final repair . The "updated v1052" release is usually a leaked
In settings, ensure the Flash ID matches the one detected by ChipGenius .
Start Repair: Click the Start button. The tool will format the NAND and attempt to re-initialize the drive .
Note: Using mass production tools will erase all data on the flash drive . For data recovery instead of repair, specialized solutions like the PC-3000 Flash are typically required .
Are you currently facing a specific error code or drive behavior that you need help troubleshooting with this tool?
Post Title: FirstChip FC1178 / FC1179 MPTools v1052 – Updated Version Released
Body:
A new update for the FirstChip MPTools utility is now available. Version v1052 brings improved support for the FC1178 and FC1179 controllers, commonly found in budget USB flash drives.
What’s New / Fixed (v1052):
Download Info:
Important Notes:
Where to find it: Check USBDev.ru or the FlashBoot.ru forums for verified mirrors.
Quick usage tip:
FirstChip FC1178/FC1179 MPTools v1052 represents a critical niche in the digital forensics and hardware maintenance world: the "Mass Production Tool" (MPTool) for Chinese NAND flash controllers. While seemingly a simple utility, its role in modern consumer electronics highlights the precarious balance between low-cost manufacturing and the reliability of flash storage. The Engineering Core: FC1178 and FC1179
At the heart of countless generic, promotional, and "white-label" USB drives are the controllers. These are small-scale processors produced by FirstChip Technology Limited
, designed specifically to interface with NAND flash memory. Target Market
: These controllers are ubiquitous in budget-friendly storage products and are frequently found in "counterfeit" drives (e.g., those mimicking brands like Kingston) that misreport their actual capacity. Technical Intricacy
: From a data recovery perspective, these chips are notoriously difficult. They utilize complex internal translation layers, adaptive XOR patterns, and 1-bit sized bad columns, making manual data extraction a challenge for even advanced engineers using specialized hardware like PC-3000 Flash The Utility: MPTools v1052 "MPTool" stands for Mass Production Tool
, a factory-grade utility used during the manufacturing phase to initialize the hardware. Version
is an updated iteration designed to handle newer firmware versions and expanded NAND support. Firmware Restoration
: Its primary "civilian" use is to "unbrick" drives that have suffered from corrupted firmware—often manifesting as a "No Media" or "Write Protected" error. Low-Level Formatting
: Unlike a standard Windows format, this tool performs a low-level wipe of the NAND, identifying and isolating "bad blocks" to ensure the remaining storage is stable. Capacity Correction
: Perhaps most importantly, it is used to reset "fake" flash drives. If a 64GB drive is actually a 1GB chip with hacked firmware, MPTools can reprogram the controller to report the true, honest capacity, potentially making a previously "trash-bound" device usable again. The Ethical and Technical Friction
The existence of tools like FirstChip MPTools v1052 underscores a duality in the hardware market. On one hand, it provides a "right to repair" for users whose budget devices have failed due to software glitches. On the other, the same software is the engine behind the manufacturing of deceptive hardware, allowing unscrupulous producers to program controllers to lie to the operating system.
If you're tasked with creating such a paper, consider focusing on specific aspects like technical details, application areas, and how the technology fits into the broader context of consumer electronics or embedded systems development.
FirstChip MPTools V1.0.5.2 (released June 1, 2022) is a specialized mass production tool designed to repair and configure flash drives using FC1178 and FC1179 controllers. It is widely used to restore "dead" drives, fix capacity errors (especially in counterfeit drives), and manage low-level flash chip settings. Key Features and Updates
This version consolidates several improvements over previous iterations to enhance reliability and hardware compatibility:
Improved Chip Yields: Refined the BIN level and contrast yield for 8T24 chips and low BIN-level chip cards.
Expanded Master Support: Includes specialized support for 1179AB master mass production. Enhanced Flash Compatibility:
Better support for Micron 3D and HY 3D flash memory, specifically improving open card yield, speed, and stability. Added support for Samsung 3D Flash.
Optimization for mainstream MLC models and newer "master" chips like the 1179s.
Stability Fixes: Improved stability for B16 BurnIn aging tests and solved previous display issues in XP-based systems where tools failed to recognize disks or caused blue screens.
Configuration Features: Users can customize "lock disk" settings and view current configuration names directly within the interface. Practical Usage
The tool is primarily distributed as a portable executable on sites like USBDev.ru and FlashBoot.ru, meaning it requires no formal installation. Commonly used settings for repair include:
Standard Scan/Factory Scan: Used to re-initialize the chip and find its true capacity.
Clear + Factory Scan: Frequently cited by users as a successful mode for restoring fake "2TB" drives to their actual sizes (often 32GB or 64GB).
ChipGenius Integration: It is often used alongside the ChipGenius tool to identify the specific Controller and Flash ID needed for correct configuration in the MPTools settings.
Note: Formatting or "opening" a card with this tool will permanently erase all data on the drive.
Are you trying to recover data from a corrupted FirstChip drive, or are you looking to repair its capacity? FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
The FirstChip FC1178/FC1179 MpTools V1.0.5.2 (released 2022-06-01) is a specialized mass production tool designed to repair and format USB flash drives using FirstChip controllers. Key Updates and Improvements
This version includes several optimizations for drive stability and performance:
Support for New Hardware: Now includes support for the FC1179S master controller.
Flash Speed Optimization: Improved 3D Flash speed priority and resolved issues where Flash speed was abnormally slow.
Stability Enhancements: Improved the stability of Hynix 3D flash memory and increased the MLC "open card" yield (the success rate for initializing raw flash chips).
Bug Fixes: Addressed issues where system tools like usbview displayed incomplete information or caused blue screens on Windows XP. Usage Information
Compatibility: This tool is frequently used to fix "fake" high-capacity drives (e.g., a 2TB drive that is actually 32GB) by restoring them to their actual factory capacity.
Language: While the interface often defaults to Chinese, you can typically switch to English via a menu in the top right corner of the application.
Download & Access: You can find this and newer versions, such as V1.0.7.2, on technical repositories like USBDev.ru or FlashBoot.ru. Important Note
If your drive uses B27 or N18 flash memory, note that this general tool may not support them; these specific chips often require dedicated version-specific tools.
The FirstChip FC1178/FC1179 MpTools V1.0.5.2 is a specialized mass production (MP) utility designed to repair and restore USB flash drives utilizing FirstChip controllers. Released as an update to resolve issues with newer memory chips, this tool is essential for fixing "No Media" errors, correcting fake capacities, and reviving drives that are no longer recognized by Windows. Key Features and Compatibility
This updated version supports a broad range of FirstChip controller models and memory configurations:
Supported Controllers: FC1178, FC1178 3D, FC1178 BC, FC1179, FC1179S, and FC1179AB. Installation
Expanded Chip Support: Includes improved compatibility for modern NAND types, including TLC and QLC chips from vendors like SanDisk, Hynix, and Intel.
Capacity Restoration: Capable of scanning for bad blocks to identify the true storage capacity of "fake" drives often sold with inflated sizes. How to Use FirstChip MpTools V1.0.5.2
To use this utility effectively, follow these steps to reset your flash drive to factory settings: FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
Here’s a practical, updated guide for using MPTools v1052 with FirstChip FC1178 / FC1179 controllers.
⚠️ Important: MPTools v1052 is an older version. For FC1178/FC1179, newer tools like FCMPTool v1.0.5.8+ or FirstChip MPTool (2022+) work better. But if v1052 is all you have, here’s how to use it effectively.
Due to frequent takedowns, the tool circulates on hardware forums, Russian and Chinese recovery sites (e.g., usbdev.ru, mydigit.cn), and file archives under names like FC1179_MPTool_v1052_2022.04.27.rar. Look for checksums or user comments confirming successful use with your specific flash ID.
Final Summary: The FirstChip FC1178/FC1179 MPTools v1052 updated is an indispensable rescue kit for anyone dealing with generic USB drives. It transforms a bricked, misrepresented, or failing drive back into a fully functional storage device. Just remember: treat the power of low-level formatting with respect – it is unforgiving, precise, and wonderfully effective when all other tools fail.
The FirstChip FC1178/FC1179 MpTools V1.0.5.2 is a specialized mass production (MP) and firmware restoration utility designed for USB flash drives utilizing FirstChip technology controllers. This updated version, released on June 1, 2022, provides critical fixes for common drive errors such as "No Media," write protection, and capacity misreporting. Key Features and Updates in V1.0.5.2
The V1.0.5.2 update introduces several performance and stability enhancements for FirstChip-based hardware:
Expanded Controller Support: Fully supports the latest FC1179S master controllers as well as FC1178 3D, FC1178 BC, FC1179, FC1179AB, FC2279S, and FC2279AA.
3D Flash Optimization: Improves the speed priority for 3D Flash and enhances stability for "hy 3D" memory modules.
Firmware Fixes: Resolves the "8t23 BIN3 error code 6" problem and addresses system-level issues where XP systems would experience blue screens or fail to recognize the disk.
Yield Improvements: Optimized the open card yield for MLC (Multi-Level Cell) NAND and fixed "double paste" issues common in high-density drives. Typical Use Cases
This tool is primarily used by technicians and advanced users for the following scenarios:
Repairing "No Media" Errors: When a drive is detected by Windows but shows 0MB capacity, the MpTools can re-flash the firmware to restore access.
Fixing Fake Capacity: Drives that falsely report higher storage (e.g., a 32GB drive showing as 128GB) can be "reset" to their true hardware capacity.
Low-Level Formatting: Unlike standard Windows formatting, MpTools can identify and isolate bad blocks on the NAND chip, potentially saving a failing drive. How to Use FirstChip MpTools
Using mass production tools requires precision, as incorrect settings can permanently "brick" a flash drive.
Identify the Controller: Use a tool like ChipGenius to confirm your drive uses a FirstChip FC1178 or FC1179 controller.
Launch and Language: The tool often starts in Chinese. Look for the "English" radio button on the side panel to switch the interface.
Access Settings: Click the Settings button. If prompted for a password, it is commonly left blank or set to a default (though "320" is noted to fail on some versions).
Configure Scan Level: For corrupted drives, users often set the Scan Level to "Clear" or "Low-level Scan" to thoroughly check for bad sectors.
Start Production: Click Start to begin the flashing process. Warning: This will permanently erase all data on the drive.
For more technical recovery steps or to find older versions like FC1178BC MpTools, visit community resources like USBDev.ru.
0.5.2 settings or need help interpreting your ChipGenius report? FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)
The FirstChip FC1178/FC1179 MpTools V1.0.5.2 is a mass production utility used to repair, format, or restore factory firmware to USB flash drives using FirstChip controllers. While V1.0.5.2 was a major update released in mid-2022, newer versions like V1.0.7.2 (updated as recently as early 2024) are also available and often recommended for newer flash memory chips. Key Features of V1.0.5.2 & Newer
Controller Support: Specifically designed for FC1178 (including BC/BD variants) and FC1179 chips.
Language Options: The interface defaults to Chinese, but you can switch to English using a menu or checkbox in the top-right corner of the window.
Repair Capabilities: Fixes "No Media" errors, write-protected drives, and "fake" capacity issues by performing a low-level scan of the NAND memory. Quick Usage Guide
Identify Your Chip: Use a tool like ChipGenius to confirm your "Controller Part-Number" is FC1178 or FC1179 before proceeding.
Download the Tool: Reliable archives for these tools include USBDev.ru. Basic Configuration: Open FCMpTools.exe. Switch the Language to English if needed.
Use the Scan Setting tab to choose between a "Fast Scan" (for minor errors) or a "Low-Level Scan" (for dead or fake drives).
Process: Click Start to begin. Note that this will erase all data on the drive and can take anywhere from 30 minutes to several hours depending on the scan depth.
Warning: Using the wrong firmware or tool version can permanently damage your USB drive. Always check your Flash ID against the tool's supported list.
FirstChip MpTools V1.0.5.2 (updated June 1, 2022) is a specialized mass production (MP) utility used to repair and reformat USB flash drives based on FirstChip FC1178
controllers. This tool is essential for fixing "fake capacity" drives or unreadable devices by low-level formatting the NAND flash memory. Supported Hardware
The utility supports a wide range of FirstChip controller variations, including: FC1178 Series: FC1178, FC1178 3D, FC1178 BC FC1179 Series: FC1179, FC1179S, FC1179AB Usage Guide Preparation : Download and extract the FirstChip_MpTools_20220601 archive. Launch the FCMpTools.exe application. Initial Setup
: A "Product Type" window may appear; leave settings as default and click . In the main interface, use the category in the right column to switch to for easier navigation. Device Detection
: Connect your flash drive. The tool should automatically identify the drive. If the drive is not detected, you may need to use ChipGenius to confirm the Flash ID matches the tool's database. Flash Recovery to begin the scanning and formatting process.
This process can be time-consuming; a 16GB drive may take approximately to complete a full scan. Completion
: Once the progress bar reaches 100%, the drive should be restored to its true factory capacity and become accessible in Windows. Key Features of V1.0.5.2 Update Expanded Database
: Includes updated support for newer 3D NAND flash types common in modern budget flash drives. Improved Detection
: Enhanced stability for detecting FC1179 series controllers that previously failed in older versions. Verification
: The tool effectively clears "fake" partition information used by unscrupulous vendors to mimic higher capacities. download link from a specific community repository like or help identifying your specific
Восстановление флешки на контроллере FC1178/FC1179
| Error | Likely Cause | Fix |
|-------|--------------|-----|
| Device not found | Driver not loaded | Install WinUSB via Zadig or use Windows 7 compatibility mode |
| Bad Block over setting | Too many bad blocks | Lower capacity in settings (e.g., 16GB → 8GB) |
| Check flash ID fail | Unsupported flash | Need newer MPTool (v1058+) |
| Download ISP fail | Corrupt firmware | Replace ISP_FC1178.bin / ISP_FC1179.bin from newer tool |
One of the most common uses for FirstChip MPTools v1052 is reviving a "bricked" USB drive.
Before we proceed, understand that MPTools are often flagged as malware by Windows Defender. This is a false positive. These tools interact directly with USB drivers and memory addresses, which antivirus software finds suspicious.
Legitimate sources for FirstChip FC1178 FC1179 MPTools v1052 Updated:
DO NOT download from random forum links with pop-up ads.