Gt005 Gps: Tracker User Manual

Contact your point of purchase for warranty. Include:

End of Manual

Pro tip: Save the admin number and WHERE command in your phone – even without internet, you can get a location SMS reply in seconds.

The GT005 GPS Tracker is a popular, cost-effective security solution for motorcycles, electric bikes, and cars. This guide serves as a comprehensive manual to help you install, configure, and troubleshoot your device effectively. 🛠️ Product Overview & Specifications

The GT005 is a mini GPRS/GSM/GPS quad-band vehicle tracker. It is designed for real-time tracking with an emphasis on low power consumption and discreet placement. Network: GSM/GPRS Bands: 850/900/1800/1900MHz Voltage Range: 9V - 36V DC (suitable for most vehicles) GPS Sensitivity: -159dBm Location Accuracy: 5-10 meters Features: ACC detection, vibration alarms, and geo-fencing. 📥 Installation Steps 1. SIM Card Preparation Purchase a standard 2G GSM SIM card. Ensure the SIM has an active data plan and SMS credit.

Important: Disable the PIN code request using a mobile phone before inserting it into the tracker. 2. Device Setup Open the back cover of the GT005.

Slide the SIM card into the slot (ensure the gold chips are facing down). Toggle the internal battery switch to "ON" (if applicable). Gt005 Gps Tracker User Manual

The LED indicators will begin to flash as the device searches for signals. 3. Wiring Configuration

The GT005 typically features a simple 2-wire or 3-wire harness:

Red Wire: Connect to the positive terminal of the vehicle battery (+).

Black Wire: Connect to the negative terminal or vehicle chassis (-).

Orange/Yellow (Optional): Connect to the ACC (ignition) line to track engine status. 📱 SMS Configuration Commands

You can control the GT005 by sending specific SMS codes from your smartphone to the SIM card number inside the tracker. SMS Command Set Admin Number admin123456 [YourPhoneNumber] Check Location smslink123456 Google Maps Link Check Status param123456 Version, ID, IP, etc. Change Password password123456 [NewPassword] password ok Set APN apn123456 [APN Name] Reboot Device CQ system reset ok (Note: "123456" is the default factory password.) 🌐 Online Tracking Setup Contact your point of purchase for warranty

To track your vehicle in real-time via an app or website, you must configure the GPRS settings.

Set the APN: Send apn123456 [YourNetworkAPN]. (Check with your SIM provider for the correct APN name).

Set the Server: Most GT005 units use a default platform like Dyegoo or GPS588. Send adminip123456 [ServerIP] [Port].

Login: Download the specified app from the manual's QR code. Use the IMEI number (located on the tracker sticker) as the username and "123456" as the password. 🚦 LED Indicator Meanings Blue LED (GPS): Flashing: Searching for satellites. Solid: GPS fixed. Green LED (GSM): Flashing: Searching for network. Solid: GSM signal acquired. ❓ Troubleshooting Common Issues

Device Offline: Ensure the SIM card has data and the APN is set correctly. Check if the vehicle is in an underground garage where signals are blocked.

Inaccurate Location: If the blue LED is flashing, the device doesn't have a "lock" on satellites. Move the vehicle to an open outdoor area. End of Manual

No SMS Response: Verify the SIM card is inserted correctly and that the "Admin Number" has been set.

If you need help with a specific part of the setup,I can provide the exact APN settings if you tell me your mobile carrier, or I can help you find the correct mobile app for your specific manufacturer.

The GT005 is a 2G GSM-based GPS tracker designed for real-time vehicle monitoring, featuring geofencing, vibration alarms, and over-speed alerts. Installation requires connecting the 4-wire harness to the vehicle’s battery and ignition (ACC), while configuration is managed via SMS commands for APN settings and admin numbers. For complete installation and configuration details, refer to the user manual from GT005 - Banggood 11 Oct 2019 —

The manual stresses this: The SIM card must have SMS capability, 2G GSM service, and GPRS data enabled. Disable the PIN code on the SIM before inserting.

The GT005 does not come with a dedicated app out of the box. Instead, you control it via text messages from an authorized phone number.

First, send this command to set yourself as the admin:

After sending this from your phone to the tracker’s SIM number, you’ll receive a reply: begin ok.