Go to Graphics > Frameskip.
Grand Theft Auto: San Andreas is widely considered one of the greatest video games of all time. For many, it is a nostalgia trip back to the golden era of the PlayStation 2. But if you are trying to relive the glory days on your Android device using the popular PS2 emulator, AetherSX2, you might have noticed something: it doesn't always run perfectly smooth.
By default, many users find themselves stuck at a choppy 30fps or inconsistent framerates. But did you know you can unlock a buttery smooth 60FPS experience?
In this guide, we will walk you through the exact settings and patches needed to run GTA San Andreas at 60FPS on AetherSX2, making the game look and feel better than it ever did on the original console.
| Issue | Severity | Workaround | |-------------------------------|----------|-------------------------------------------------| | Game runs at double speed | Critical | Must apply 60 FPS PNACH patch | | Audio crackling | Medium | Set Audio Sync → Async Mix + Time Stretch OFF | | Physics glitches (cars) | Low | Use EE Cycle Rate = 75% (not 60%) | | Flickering shadows | Low | Switch to Vulkan + Software Blending OFF | | Heat throttling (30+ min) | Medium | Enable emulator frame limiter → 57 FPS |
Once you launch the game, there are a few things to check inside the GTA San Andreas menu:
| Region | Native FPS | 60 FPS Goal | |--------|------------|--------------| | NTSC | 30 | 2x speed hack | | PAL | 25 | 2.4x speed hack |
Without patches, forcing 60 FPS causes 2x game speed because the PS2 logic is tied to frame rate.
Not recommended for serious play due to broken game logic. For the classic PS2 atmosphere, stick to 30 FPS. For smooth 60 FPS, use the native Android version.
Would you like the exact 60 FPS cheat file for your specific game region (US/EU/JP)?
Here’s a short piece optimized for search or a video title/description about running GTA: San Andreas on AetherSX2 at 60fps:
Title:
GTA San Andreas on AetherSX2 – 60fps Settings & Performance Guide
Description / Mini-Guide:
Getting a stable 60fps in Grand Theft Auto: San Andreas on the AetherSX2 PS2 emulator (Android) requires the right balance of settings and device power.
🔧 Recommended Settings:
🎮 In-Game Settings (via modded SLUS):
Use a 60fps cheat patch or an undub/modded ISO (unlocked framerate). The vanilla PS2 version targets 25–30fps, so a patch is required to double the speed correctly.
📱 Best devices for stable 60fps:
Snapdragon 8 Gen 1/2/3, 888, 870 (with active cooling), or Dimensity 9000+.
⚠️ Note: Even on strong chips, heavy scenes (forests, storms, Las Venturas strip) may drop to ~45–50fps. Lowering resolution or enabling GPU Palette Conversion can help.
Grand Theft Auto: San Andreas at a smooth 60 FPS on (or its community forks like
) is a popular goal for mobile emulation. Since the original PS2 version is hard-coded to 30 FPS, achieving 60 FPS requires a combination of patch codes and specific emulator configurations 1. Applying the 60 FPS Patch To unlock the framerate, you must apply a patch or manual cheat code. Locate Patch Codes
: Find 60 FPS patches specific to your game version (e.g., SLUS-20946 for North America or SLES-52541 for Europe) on repositories like PCSX2 Forums Activation Steps Open AetherSX2 and start the game. menu and select Patch Codes
Add a new patch, title it "60 FPS," and paste the specific code (usually starting with
Grand Theft Auto: San Andreas at 60 FPS on (or NetherSX2), you must apply a specific memory patch code and adjust your emulator settings to prevent the game from running in "fast-forward" mode. 1. Apply the 60 FPS Patch Code The following code works for Grand Theft Auto: San Andreas (USA) Version 1.03 SLUS-20946 Patch Name: 60 FPS Patch Patch Code: patch=1,EE,006678CC,extended,00000001 How to Add It: Open AetherSX2 and launch GTA: San Andreas button and navigate to Patch Codes
, give it a title (e.g., "60 FPS"), and paste the code above. Enable Patch Codes is toggled General Settings 2. Adjust Emulator Settings Gta San Andreas Aethersx2 60fps
Because the original game logic is tied to 30 FPS, simply unlocking the frame rate can cause the game to run at double speed. You must adjust the EE Cycle Rate to compensate: EE Cycle Rate: Change this to (Overclocking). Frame Limiter: Keep this set to 100% (60 FPS) to prevent the game from exceeding its target speed. GPU Renderer: for better performance on most modern Android devices. 3. Performance Tips Widescreen Fix:
Most 60 FPS patches are bundled with widescreen fixes. If your game looks stretched, check for a separate
file or widescreen patch code for your specific game version. Hardware Download Mode: Set this to Unsynchronized
in Graphic settings to speed up performance on mid-range devices. Version Compatibility: Ensure your game's
matches the patch. For version 1.03 (USA), the CRC is typically for your version of San Andreas?
This report outlines how to achieve a stable 60 FPS in Grand Theft Auto: San Andreas ) emulator on Android. 1. The 60 FPS Patch Code Most PS2 games, including San Andreas
, are hard-coded to run at 30 FPS. To force 60 FPS, you must apply a specific patch code. Standard Code for SLUS-20946 (Version 1.03): patch=1,EE,006678CC,extended,00000001 Copied to clipboard Verification : This specific code is widely cited by the EmulationOnAndroid community for the USA version of the game. 2. Installation Steps
To apply the patch within AetherSX2, follow these instructions provided by users on Reddit : Launch GTA: San Andreas in AetherSX2. Access Menu Pause/Options menu during gameplay. Patch Codes Enter Data : 60 FPS Patch Patch Code : Paste the code provided above. : Go back to the pause menu, enter General Settings , and ensure Enable Patch Codes is toggled 3. Recommended Performance Settings
Running at 60 FPS doubles the processing load. To maintain stability, adjust these settings based on recommendations from performance guides GPU Renderer for better performance on most modern Android devices. Upscale Multiplier : Start at 1x (Native)
. Only increase to 2x or 3x if your hardware (e.g., Snapdragon 8 Gen 1 or higher) can handle it without dropping below 60 FPS. Texture Preloading Full (Hash Cache) to reduce stuttering. EE Cycle Rate 100% (Normal) EE Cycle Skip Normal (0) . Underclocking may cause unstable frame timing at 60 FPS. 4. Known Issues & Fixes Physics Glitches
: Many PS2-era games tie physics to the framerate. High FPS can occasionally cause faster animations or issues with swimming speed. Resolution Fixes
: If the game appears stretched or blurry, ensure you are using a Widescreen Patch
alongside the 60 FPS code. These are often included in community patch repositories like those on GitHub. Texture Replacements
: For a "Remastered" look, you can install HD texture packs by placing them in the /textures/ folder of the AetherSX2 directory as detailed in HD texture guides exact patch codes
for a different regional version, such as the PAL (European) release?
To get GTA San Andreas running at 60fps on AetherSX2, you need to apply a specific patch code and optimize your emulator settings. While the original PS2 game was locked at lower framerates (typically 25-30fps), these patches modify the game's internal code to allow for smoother movement. Step 1: Adding the 60fps Patch Code
You must manually add the patch code to the emulator's system to override the default framerate limit.
Identify Your Game Version: Check your game's serial number (e.g., SLUS-20946 for USA or SLES-52541 for PAL).
Open AetherSX2: Launch the emulator and start GTA San Andreas.
Access Patch Menu: Tap the Pause/Options menu during gameplay, then select Patch Codes. Add the Code: Tap Add Patch and give it a title like "60fps Patch".
Paste the following code (standard for the NTSC-U v1.03 version):
patch=1,EE,004ff434,word,3F24A9CF patch=1,EE,004ff628,word,3f470000 patch=1,EE,004ff630,word,3f470000 Use code with caution. Copied to clipboard
(Note: Exact codes may vary by version; check repositories like GitHub for your specific game ID). Go to Graphics > Frameskip
Enable Patches: Go to General Settings > System and ensure Enable Patch Codes is toggled ON. Step 2: Best AetherSX2 Settings for Performance
Grand Theft Auto: San Andreas (or NetherSX2) emulator, you must use a specific patch code because the original PS2 version is natively capped at
. Simply increasing the "speed" in settings will speed up the entire game engine (including physics and movement), rather than providing a smooth framerate. 1. Apply the 60 FPS Patch
The most effective way to achieve a true 60 FPS experience is by using a file or manually entering a cheat code. Locate Patch Codes : You can find 60 FPS codes on community forums like Reddit's EmulationOnAndroid How to Install Hold the game icon in AetherSX2 and select Game Properties Navigate to the Edit Patches
and paste the specific code for your game version (e.g., SLUS-20946 for North America). Enable Patches is toggled on in the System settings. 2. Recommended Emulator Settings
For stable performance, especially on mid-range devices, use these tweaks: EE Cycle Rate (Underclocking)
to reduce CPU strain at the cost of potential internal "slow-mo," which often helps low-to-mid-range chips maintain higher frame outputs. GPU Renderer for better performance on most modern Android devices. Upscale Multiplier : Start at 1x or 2x Native Resolution
. Pushing to 3x or higher (HD) requires a high-end chip like a Snapdragon 870 or better. Hardware Download Mode to avoid graphical glitches. 3. Potential Physics Issues
Running GTA SA at 60 FPS on the PS2 engine can occasionally cause "frame-timing" bugs, such as:
Intro
(Upbeat background music starts playing. The host appears on screen with a friendly smile)
Host: "Welcome back to [Your Channel Name]! Today, we're going to take a look at one of the classics, Grand Theft Auto: San Andreas, running on the Aethersx2 emulator at a buttery-smooth 60 frames per second. This emulator has been making waves in the gaming community, and we're excited to see how it performs with this beloved game."
Gameplay Footage
(Cut to gameplay footage of GTA San Andreas running on Aethersx2 at 60 FPS. The host provides commentary)
Host: "As you can see, the game looks and feels great. The emulator has done an excellent job of rendering the game's graphics, and the 60 FPS makes for a super-smooth experience. We're seeing some significant improvements over the original game's 30 FPS cap."
Comparison to Original Game
(Cut to a comparison video showcasing the original game's 30 FPS and the Aethersx2 emulator's 60 FPS side-by-side)
Host: "Let's take a look at a comparison between the original game's 30 FPS and the Aethersx2 emulator's 60 FPS. As you can see, the emulator provides a much more fluid experience, especially during intense action sequences."
Aethersx2 Settings
(Cut to a shot of the Aethersx2 emulator settings)
Host: "So, what settings are we using to achieve this 60 FPS? We're running the emulator at its default settings, with a few tweaks to get the most out of our hardware. Specifically, we're using the 'Hardware' renderer, with 'Multithreading' enabled, and 'Frame skipping' set to '0'."
Performance Analysis
(Cut to a graph or chart showing the frame rate performance) | Region | Native FPS | 60 FPS
Host: "Let's take a look at the performance. As you can see, the emulator is able to maintain a consistent 60 FPS throughout the gameplay, with minimal dips. This is a great sign, indicating that the emulator is able to handle the game's demands with ease."
Conclusion
(Outro music starts playing, and the host appears on screen with a friendly smile)
Host: "And that's it for today! Grand Theft Auto: San Andreas running on Aethersx2 at 60 FPS is an absolute delight. If you're a fan of this game or just want to experience it in a new way, be sure to give the Aethersx2 emulator a try. Thanks for watching, and don't forget to like, comment, and subscribe for more gaming content!"
End Screen
(End screen with a call-to-action, such as a link to the Aethersx2 emulator or a playlist of other emulator-related content)
This script serves as a basic outline, and you can modify it to fit your personal style and preferences. Make sure to provide proper attribution and respect the intellectual property rights of the game developers and emulator creators. Have fun with your video!
Running GTA San Andreas at 60 FPS on AetherSX2 transforms the classic PlayStation 2 experience into a modern, fluid masterpiece on Android. While the original PS2 version was capped at 30 FPS, players can now unlock the full potential of their mobile hardware using specific performance patches and optimized emulator settings. The 60 FPS Patch: Installation Guide
To achieve a true 60 FPS experience, you must apply a .pnach cheat file. This is necessary because the game's internal engine is hard-coded to run at lower frame rates, and simply changing emulator settings won't unlock the cap.
Identify Your Game Version: Check your ISO's Game ID (e.g., SLUS-20946 for North America or SLES-52541 for Europe).
Download the Patch: Locate a dedicated 60 FPS patch for your specific ID. Community forums like Reddit's EmulationOnAndroid often host these codes.
Place the File: Move the downloaded .pnach file to the /AetherSX2/cheats_ws folder on your device's internal storage. Activate in AetherSX2: Launch the game and tap the pause menu.
Navigate to Patch Codes and select Add Patch if you need to paste manual code.
Ensure Enable Cheats or Enable Patch Codes is toggled ON in the general settings. Optimized AetherSX2 Settings for Performance
Achieving 60 FPS requires a balance between raw power and efficient settings, especially on mid-range devices.
Graphics Renderer: Switch to Vulkan for better performance on most modern Snapdragon processors.
Resolution: Set the Upscale Multiplier to 1x Native for the highest frame stability, or 2x if you have a high-end device (Snapdragon 8 Gen 1 or higher). System Tweaks (Performance Section):
EE Cycle Rate (Underclocking): Set to 75% (-1) for mid-range devices to reduce CPU strain.
EE Cycle Skip: Set to Normal (0) unless you experience heavy slowdowns.
Threaded Presentation: Enable this to utilize multiple CPU cores for rendering.
Advanced Hardware Fixes: For those using NetherSX2 (an updated version of Aether), enabling Auto Flush and setting Skip Draw Start/End to 3 can resolve graphical glitches. Common Issues & Physics Fixes
Unlocking the frame rate in GTA San Andreas can sometimes "break" the game's physics, as many animations were designed for 30 FPS.
Since there is no single "downloadable file" that magically unlocks this for every device, you need the correct Settings Configuration and the PNACH Cheat Code.
Here is the proper setup piece to achieve 60 FPS in GTA San Andreas on AetherSX2.