Hp Un2420 Mobile Broadband Module Driver Windows 10 Upd [LIMITED · 2025]
If Method 1 fails (usually due to driver signature enforcement), you can use a community-modified driver that adds Windows 10 compatibility strings to the INF file.
Warning: This disables driver signature verification. Use only if Method 1 doesn't work.
The HP un2420 can work on Windows 10, but it is not plug-and-play. Performance is limited to 3G/HSPA (up to 7.2 Mbps down / 5.76 Mbps up). For reliable 4G/LTE, consider upgrading to an external USB LTE modem or a newer WWAN card (e.g., HP hs3210 / Sierra Wireless EM7455).
To update the HP un2420 Mobile Broadband Module on Windows 10, you must use a manual installation method because official Windows 10 drivers for this older hardware (Qualcomm Gobi2000) are not available . Update Guide: HP un2420 on Windows 10
Follow these steps to install the driver using compatibility mode or manual folder selection: Download the Legacy Driver
Since no native Windows 10 version exists, download the latest official Windows 7 driver package. A common working version is SoftPaq sp51022 or sp53068 . Run in Compatibility Mode Right-click the downloaded .exe file and select Properties. Navigate to the Compatibility tab.
Check Run this program in compatibility mode for: and select Windows 7 . Click Apply and run the installer as an administrator. Manual Installation (If the installer fails)
If the direct installer doesn't work, let it extract files to the default location (usually C:\SWSetup\sp51022) .
Open Device Manager (right-click the Start button and select it).
Find the HP un2420 Mobile Broadband Module (it may appear under "Network Adapters" or "Other Devices" with a yellow exclamation mark) . Right-click the device and select Update driver . Choose Browse my computer for drivers.
Click Browse and navigate to the extraction folder (e.g., C:\SWSetup\sp51022). Ensure Include subfolders is checked . Click Next to complete the installation. Verify Hardware IDs
If you are unsure which driver to use, check the Hardware ID in Device Manager under Properties > Details.
Standard IDs for this module include USB\VID_03F0&PID_251D . Important Notes:
Third-Party Tools: While sites like DriverScape list Windows 10 versions, these are often just the legacy Qualcomm drivers repackaged; manual installation of the official HP SoftPaq is safer .
Alternative Models: For users with the newer un2430 module, a similar process using Windows 8.1 drivers (sp63218) is often required . HP un2420 Mobile Broadband Module for HP ProBook 6450b hp un2420 mobile broadband module driver windows 10 upd
HP un2420 Mobile Broadband Module Diagnostics (COM5): Hardware IDs: USB\Vid_03f0&Pid_251d&Rev_0002&Mi_01&Os_NT. Hardware IDs: USB\ HP Support Community
To update the HP un2420 Mobile Broadband Module for Windows 10, you must use legacy Windows 7 drivers, as HP does not provide official native support for this hardware on Windows 10. Driver Details & Compatibility
The HP un2420 is a Qualcomm Gobi2000-based module used in legacy business notebooks. While it is officially compatible only up to Windows 7, users have successfully updated it on Windows 10 using specific SoftPaq files. Official Latest Driver (for Win7): Version 2.0.7.3. Key SoftPaq Files: HP SoftPaq sp53068. HP SoftPaq sp51022. How to Install the Update on Windows 10
Because there is no "Windows 10" installer, you must force the Windows 7 driver to work manually:
Download and Extract: Download sp53068 or sp51022. Run the file to extract it; it will typically save to C:\SWSetup\sp51022 or a similar folder.
Open Device Manager: Right-click the Start button and select Device Manager.
Locate the Device: Find the HP un2420 Mobile Broadband Module (it may have a yellow exclamation mark or appear as an "Unknown Device"). Update Driver Manually: Right-click the device and select Update driver. Choose "Browse my computer for driver software".
Point the browser to the extraction folder (e.g., C:\SWSetup\sp51022). Ensure "Include subfolders" is checked and click Next.
Compatibility Mode (If needed): If the installer fails to run, right-click the setup .exe file, go to Properties > Compatibility, and select Windows 7. Alternatives for Missing Drivers
If the official HP Support site does not list your specific model for Windows 10, you can find the driver components on third-party repositories:
DriverScape : Offers individual driver files for the modem, Ethernet adaptor, and USB device.
DriverIdentifier : Provides a list of matching drivers based on hardware IDs. Solved: HP un2420 Mobile Broadband Module - 7678243
To update the HP un2420 Mobile Broadband Module driver for Windows 10, you must use a legacy Windows 7 driver and install it using Compatibility Mode
, as HP does not provide an official native driver for Windows 10. HP Support Community Recommended Driver Files If Method 1 fails (usually due to driver
HP officially supports this hardware through the following SoftPaqs, which contain the Qualcomm Gobi2000 drivers HP Support Community Primary Driver: sp53068.exe (Qualcomm Gobi2000 Drivers). Alternative/Diagnostics: sp51022.exe Installation Steps for Windows 10
Because Windows 10 is not natively supported for this older hardware, follow these steps to ensure the module is recognized: Remove Old Software : Use the Windows Control Panel to uninstall any existing HP Connection Manager
or previous broadband drivers, as they often conflict with Windows 10's built-in cellular settings. Set Compatibility Mode Right-click the downloaded file (e.g., sp53068.exe Properties Compatibility
Check "Run this program in compatibility mode for" and select Run as Administrator : Right-click the file again and select Run as Administrator to start the installation. Manual Driver Update (If needed) If the device still appears with an error in Device Manager , right-click it and select Update Driver Browse my computer for driver software and point it to the extraction folder (usually C:\SWSetup\sp53068 Include subfolders is checked. : Reboot your computer to finalize the installation. HP Support Community Connecting to Cellular
Once installed correctly, you do not need the HP Connection Manager. You can manage your connection directly through the Windows 10 Network & Internet settings under the specific laptop model to confirm if a different driver might work better? HP un2420 Mobile Broadband Module - HP Support Community
HP un2420 Mobile Broadband Module Driver Windows 10 Update: A Comprehensive Guide
Are you struggling to find the correct driver for your HP un2420 Mobile Broadband Module on Windows 10? Look no further! This article will provide you with a step-by-step guide on how to update your driver, as well as offer valuable insights into the importance of keeping your drivers up-to-date.
What is the HP un2420 Mobile Broadband Module?
The HP un2420 Mobile Broadband Module is a wireless broadband module designed for HP laptops and mobile devices. It allows users to connect to the internet via cellular networks, providing a convenient and mobile internet solution. The module is a crucial component of HP devices, and its driver plays a vital role in ensuring seamless connectivity.
Why is the HP un2420 Mobile Broadband Module Driver Important?
The HP un2420 Mobile Broadband Module driver is a software component that enables communication between the module and your Windows 10 operating system. The driver acts as a translator, allowing the operating system to recognize and interact with the module. Without a compatible and updated driver, the module may not function correctly, leading to connectivity issues, slow speeds, or even complete disconnection.
Why Update the HP un2420 Mobile Broadband Module Driver on Windows 10?
Updating your HP un2420 Mobile Broadband Module driver on Windows 10 is essential for several reasons:
How to Update the HP un2420 Mobile Broadband Module Driver on Windows 10 To update the HP un2420 Mobile Broadband Module
Updating the HP un2420 Mobile Broadband Module driver on Windows 10 is a straightforward process. Here are the steps to follow:
Method 1: Using the HP Website
Method 2: Using the Device Manager
Method 3: Using a Third-Party Driver Update Tool
Troubleshooting Common Issues
If you encounter issues during the update process or experience connectivity problems after updating the driver, try the following:
Conclusion
Updating the HP un2420 Mobile Broadband Module driver on Windows 10 is a crucial step in ensuring optimal performance, compatibility, and security. By following the steps outlined in this article, you can easily update your driver and enjoy seamless connectivity. Remember to regularly check for driver updates to ensure your device stays up-to-date and runs smoothly.
Additional Tips and Recommendations
By following these guidelines and best practices, you can ensure that your HP un2420 Mobile Broadband Module driver is always up-to-date, and your device runs smoothly and efficiently.
Here’s a step-by-step guide to getting the HP un2420 (Gobi 2000) mobile broadband module working on Windows 10, including driver setup and important limitations.
Before diving into driver installation, understanding why your Windows 10 update broke the functionality is crucial. The HP un2420 is based on Qualcomm’s Gobi 2000 chipset. HP released its last official driver package for this module in 2012, designed specifically for Windows 7 and Vista.
When Windows 10 updates (like the Anniversary Update, Creators Update, or 22H2) roll out, Microsoft’s driver signature enforcement becomes stricter, and legacy network architectures (like the old "Dial-Up" connections used by this card) are deprioritized. The result? Windows 10 sees the hardware but labels it as "Unknown Device" or fails to start the driver with Code 10 or Code 31.