Hpe Smart Array S100i Sr Gen10 Driver Windows Server 2022 ●
Even with the correct driver, issues arise. Here are the top fixes for the hpe smart array s100i sr gen10 driver windows server 2022 environment.
If installing Windows Server 2022 via USB media or ISO, the driver must be loaded during the setup phase, or the drives will not be visible.
Will it work? Yes. Is it stable? Mostly. Should you trust it for a domain controller or SQL server? Absolutely not.
For a home lab, file server, or development environment, the S100i + Windows Server 2022 combo is a great way to save money. Just maintain good backups and consider this a bridge solution until HPE (hopefully) releases a signed 2022 driver.
TL;DR: Download the Windows Server 2019 driver. Use the "Load Driver" trick during setup. It works.
Have a different experience or found a newer driver? Let me know in the comments below!
Informative Report: HPE Smart Array S100i SR Gen10 Driver for Windows Server 2022
Introduction
The HPE Smart Array S100i SR Gen10 is a high-performance, enterprise-class storage controller designed for HPE ProLiant Gen10 servers. This report provides information on the driver for the HPE Smart Array S100i SR Gen10 controller on Windows Server 2022.
Driver Overview
The HPE Smart Array S100i SR Gen10 driver for Windows Server 2022 is a software component that enables the operating system to communicate with the storage controller. The driver provides a range of features, including:
Driver Details
Installation and Configuration
To install the driver on Windows Server 2022:
Recommendations and Best Practices
Troubleshooting
Common issues and solutions:
Conclusion
The HPE Smart Array S100i SR Gen10 driver for Windows Server 2022 provides a reliable and high-performance storage solution for HPE ProLiant Gen10 servers. By following the installation and configuration guidelines, and staying up-to-date with the latest driver versions, administrators can ensure optimal performance and data protection for their storage environment.
The HPE Smart Array S100i SR Gen10 is an entry-level, software-based SATA RAID solution designed for HPE ProLiant Gen10 servers. For Windows Server 2022, HPE provides a dedicated Smart Array S100i SR Gen10 SW RAID Driver that must be manually loaded during OS installation if not using Intelligent Provisioning. Key Specifications & Support Supported OS: Windows Server 2016, 2019, and 2022.
RAID Levels: Supports RAID 0, 1, 5, and 10 for up to 14 SATA drives.
Boot Mode: Requires UEFI Boot Mode; it does not support Legacy BIOS. hpe smart array s100i sr gen10 driver windows server 2022
Driver Version: The latest validated driver for Windows Server 2022 is often 1010.14.0.0(C) or newer. OS Installation Guide
Because the S100i is a software RAID controller, its driver is not included in standard Windows Server 2022 installation media. To install the OS, use one of the following methods: Assisted Installation (Recommended): Use HPE Intelligent Provisioning (F10 during boot).
This tool automatically injects the necessary storage drivers, ensuring the Windows installer recognizes your logical drive. Manual Driver Injection:
Download the S100i SR Gen10 SW RAID Driver for Windows Server 2022 from the HPE Support Center. Extract the .exe contents to a USB drive.
During the "Where do you want to install Windows?" step, click Load Driver and browse to the folder on your USB drive.
Once loaded, your RAID array should appear as a valid installation target. Management Tools
To monitor and configure your arrays within Windows, you should install the HPE Smart Storage Administrator (SSA). This utility allows you to perform online capacity expansion and check drive health directly from the desktop.
HPE Smart Array S100i SR Gen10 SW RAID Driver for Windows Server 2022
is available as a dedicated software package from the HPE Support Center. HPE Support Center Official Driver Details 1010.14.0.0 (C). Release Date: September 28, 2022. Operating System Support:
This specific version is designated for Windows Server 2022. Direct Download: You can find the latest version on the official HPE Support Software Details page Installation Instructions
If you are installing Windows Server 2022 for the first time and the installer does not see your drives, follow these steps: Extract the Driver : Download the
from HPE and run it on a separate PC to extract the contents to a USB drive. Load During Setup Boot into the Windows Server 2022 installation media.
At the "Where do you want to install Windows?" screen, click Load Driver
Browse to the folder on your USB drive containing the extracted S100i drivers. Confirm RAID Status : Ensure the S100i controller is enabled in the UEFI System Configuration
(F9 during boot) and that your RAID array is already created before starting the OS installation. Hewlett Packard Enterprise Community Important Notes Software RAID
: The S100i is a software-based RAID solution, meaning it relies on the Windows driver and system CPU to manage data redundancy. Compatibility
: While older versions (like 106.12.6.0 for Server 2019) may sometimes load, HPE strongly recommends using version 1010.14.0.0 or later specifically for Server 2022 to ensure stability. Microsoft Learn Are you performing a clean install
an existing server? I can provide specific steps for injecting the driver into an ISO if you are doing a mass deployment.
HPE Smart Array S100i SR Gen10 driver is fully supported on Windows Server 2022
. Since this is a software-based RAID solution, the driver is not included in standard Windows installation media; you must manually provide it for the installer to recognize your logical volumes. Hewlett Packard Enterprise Essential Driver Information
To ensure stability and performance, use the dedicated driver version released specifically for the 2022 OS: 1010.14.0.0(C) Release Date: September 28, 2022 Download Source: HPE Support Center - S100i Driver for Windows Server 2022 Installation Best Practices Preparation: Download the driver package and extract the contents to a before starting your OS installation. Even with the correct driver, issues arise
During the "Where do you want to install Windows?" step, click Load Driver and browse to the extracted folder on your USB. Automation Option: HPE Intelligent Provisioning
to automate the driver injection process during the OS install. Requirement Check: requires UEFI Boot Mode
; it is not supported if the server is configured for Legacy BIOS. Hewlett Packard Enterprise Quick Comparison: vs. SR100i
Verify your server model to ensure you are using the correct software RAID driver: S100i SR Gen10
Designed for standard ProLiant Gen10 servers (e.g., DL360/DL380 Gen10). SR100i Gen10 Plus Specifically for Gen10 Plus platforms. If you have a "Plus" model, use Driver Version 1010.124.100.1005 Hewlett Packard Enterprise UEFI configuration steps
to enable Software RAID mode before starting your installation?
The HPE Smart Array S100i SR Gen10 is a software-based RAID solution that requires specific drivers to function correctly under Windows Server 2022. While it provides essential data protection features like rebuilding arrays after drive failure, its software-only nature means RAID processing relies on the system's CPU, which can lead to performance variations depending on your hardware configuration. Driver Compatibility and Downloads
For Windows Server 2022, you should use the latest qualified drivers to ensure stability and performance.
HPE Smart Array S100i SR Gen10 SW RAID Driver: Version 1010.14.0.0(C) is the official release supporting Windows Server 2022.
Alternative Driver Package: For broader compatibility, the HPE Smart Array Gen10, Gen10Plus and Gen11 Controller Driver also supports Windows Server 2022/2025 and is recommended for use alongside specific controller firmware (version 8.00). Installation and Setup
Because the S100i driver is not included in the standard Windows installation media, the OS will not recognize your RAID logical volumes by default during setup.
Assisted Installation: Use HPE Intelligent Provisioning during setup; it automatically injects the necessary drivers, requiring no manual intervention.
Manual Injection: If installing from standard media, you must: Extract the driver files to a FAT32-formatted USB drive.
During the "Where do you want to install Windows?" step, click Load Driver and point to the folder on your USB drive.
BIOS Configuration: Ensure the "Embedded SATA Configuration" in the UEFI System Utilities (F9) is set to Smart Array SW RAID Support. Note that this feature is not supported in Legacy BIOS mode. Performance and Management
Management Tools: Use the HPE Smart Storage Administrator (SSA) GUI or CLI to configure and monitor your arrays. Since the S100i is a "RAID-only" controller, individual physical drives are masked from the OS and only logical volumes are exposed.
Performance Note: Some users have reported performance drops in RAID-5 configurations on specific Gen10 Plus models; ensuring you have the latest firmware and driver combination is critical for optimal throughput.
Installing Windows Server 2022 on HPE Gen10 servers often hits a snag when the installer fails to see any hard drives. This happens because the HPE Smart Array S100i SR Gen10 is a software-based RAID controller whose drivers aren't included in the standard Windows installation media.
To successfully set up your server, you must manually provide the driver during the "Where do you want to install Windows?" step of the setup process. Essential Driver Details
The S100i SR Gen10 (S-class) is an entry-level solution designed specifically for Windows environments. It supports up to 14 SATA lanes and RAID levels 0, 1, 5, and 10.
Official Driver Source: You can download the latest version from the HPE Support Center, which officially supports Windows Server 2022. Extract Files:
Version Note: Always use the driver labeled for "Windows Server 2022" to ensure full compatibility and stability. Step-by-Step Installation Guide 1. Preparation Download the .exe driver package from the HPE website.
Run the file on a separate PC and select the Extract option.
Copy the extracted folder (containing the .inf files) to a USB flash drive. 2. Enable Software RAID in UEFI
Before installing the OS, ensure the controller is in the correct mode: Reboot the server and press F9 to enter System Utilities.
Navigate to System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options.
Set Embedded SATA Configuration to Smart Array SW RAID Support.
Note: This controller only works in UEFI Boot Mode; it does not support Legacy BIOS. 3. Inject the Driver During Setup
The HPE Smart Array S100i SR Gen10 is fully supported on Windows Server 2022
. It is an entry-level "S-class" software RAID solution that utilizes the system's CPU and memory to manage SATA drives in RAID 0, 1, 5, and 10 configurations. Hewlett Packard Enterprise 1. Driver Acquisition
Drivers for this controller are not included in the standard Microsoft Windows installation media. You must obtain them through the following methods: Hewlett Packard Enterprise Direct Download: HPE Smart Array S100i SR Gen10 SW RAID Driver specifically for Windows Server 2022. Service Pack for ProLiant (SPP): Standardize your environment using the Windows Server 2022 OS Support Pack
, which bundles all optimized drivers for Gen10 and Gen10 Plus servers. Intelligent Provisioning:
If you use HPE's assisted installation tool, the drivers are automatically injected during the OS setup. Hewlett Packard Enterprise 2. Installation Guidelines
If you are performing a manual OS installation (without Intelligent Provisioning), follow these steps to ensure the installation recognizes your logical volumes: Extract Drivers: Download the driver executable (e.g., cpXXXXXX.exe ) and extract its contents to a Mount Storage:
During the "Where do you want to install Windows?" phase of setup, the installer will likely show no drives. Inject Driver: "Load Driver"
and browse to the folder on your USB drive containing the extracted files. Complete Setup:
Once the driver is loaded, the logical RAID volumes should appear as available installation targets. 3. Key Technical Specifications RAID Levels 0, 1, 5, 10 Max Drives Up to 14 SATA lanes (Legacy BIOS is not supported) Supported Media SATA HDDs and SSDs (6G support) Performance
Software-based; higher CPU/memory usage compared to hardware controllers
Fix:
Re-download the driver. Use the HPE SPP method as a backup. Alternatively, use the HPE online driver CD ISO for Windows.
Once Windows Server 2022 boots, here is how to keep it running:
There are two primary methods for deploying the driver: Automated (via Intelligent Provisioning) and Manual (Driver Injection).