Huawei Atn 910c May 2026

Supports complex Hierarchical QoS (HQoS) with eight hardware queues per port. It can shape traffic at 64 Kbps granularity, critical for slicing 5G services across a shared backhaul.

How does the 910C fit within the larger Huawei ATN ecosystem?

| Model | Typical Role | Interfaces | Form Factor | Key Differentiator | |-------|--------------|------------|-------------|---------------------| | ATN 905 | Industrial Access | 4 GE + 4 FE | DIN-rail, fan-less | Very low port count, cost-optimized edge. | | ATN 910C | Industrial Aggregation | 8 GE Combo + 2 FE | 1U half-rack, fan-less | Sweet spot: port density + MPLS + industrial temp. | | ATN 950B | Aggregation / Edge Router | Up to 10 slots (mix of 10GE, GE) | 2U chassis, fans | Higher throughput, supports 10G uplinks, AC/DC. | | ATN 980B | Core Aggregation | Modular, up to 100G | 3U chassis | Carrier-grade, large buffer, full MPLS VPN. | huawei atn 910c

Verdict: Choose the ATN 910C when you need MPLS-TP + industrial environmental specs + 8 GE ports in a single, fan-less unit. Choose the ATN 950B if you need expansion slots or 10GE uplinks. Choose the ATN 905 if you only need 4 ports.

From an engineering perspective, the ATN 910C is managed via: Supports complex Hierarchical QoS (HQoS) with eight hardware

Example Basic Port Configuration (Conceptual CLI):

interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 100-200
 mpls enable
 mpls te
 quit
interface TenGigabitEthernet0/0/9
 ip address 172.16.0.1 255.255.255.252
 mpls enable
 clock synchronization enable
 ptp enable

[ATN910C-Substation1] erps ring 1
[ATN910C-Substation1-erps-ring1] port0 interface gigabitethernet 0/0/1
[ATN910C-Substation1-erps-ring1] port1 interface gigabitethernet 0/0/2
[ATN910C-Substation1-erps-ring1] instance 1 vlan 100
[ATN910C-Substation1-erps-ring1] ring-node-type neighbour  (for a non-RPL owner)

<Huawei> system-view
[Huawei] sysname ATN910C-Substation1
[ATN910C-Substation1] interface gigabitethernet 0/0/1
[ATN910C-Substation1-GigabitEthernet0/0/1] port link-type trunk
[ATN910C-Substation1-GigabitEthernet0/0/1] port trunk allow-pass vlan 100 200

Who should be looking at the Huawei ATN 910C? From an engineering perspective, the ATN 910C is

| Interface Type | Quantity | Speed | Description | |----------------|----------|-------|-------------| | GE SFP Combo | 8 ports | 100/1000 Mbps | Each pair consists of one electrical (RJ45) and one optical (SFP) interface; only one can be active at a time. | | FE Electrical | 2 ports | 10/100 Mbps | Dedicated Fast Ethernet ports for legacy devices or low-bandwidth sensors. | | Console Port | 1 port | – | RJ45 serial console for out-of-band management and initial configuration. |