Atn 910da Datasheet Top: Huawei

If you have parsed the Huawei ATN 910DA datasheet top details thoroughly, you will realize this device is a niche but powerful tool. It is not for generic enterprise office networking (where a cheaper AR series router would suffice). Instead, it is designed for:

The top selling points – fanless operation, -40°C resilience, TDM support, and 1588v2 PTP – make it unmatched in its class. Before purchasing, confirm that your required software license (e.g., MPLS, VLL, or SyncE) is included, as Huawei uses a "feature license" model for some advanced protocols.

For the latest revisions, always cross-reference the official Huawei ATN 910DA datasheet top release notes, as hardware versions (e.g., V2) may offer increased memory or newer SFP+ support.

Disclaimer: Specifications are based on publicly available documentation for the Huawei ATN 910DA as of the 2023-2025 era. Always refer to the official Huawei Enterprise Support for current datasheets and EOS/EOL notices.

Keywords used: Huawei ATN 910DA datasheet top, ATN 910DA specifications, Huawei ATN 910DA fanless router, ATN 910DA port density, MPLS-TP edge router.

Huawei ATN 910DA is a high-performance, compact 1U router designed for next-generation 5G mobile backhaul and multi-service convergence. It features a high-density port configuration with support for

interfaces, making it a critical component for high-bandwidth carrier networks. Huawei Carrier Core Technical Specifications

The following specifications represent the "top" tier of the ATN 910DA hardware capabilities: Port Density 16 x 25GE/10GE/GE (SFP28/SFP+ ports). 8 x 10GE/GE/FE Form Factor

: 1U high, designed for high-density space-constrained environments. Reliability : Support for Hardware Redundancy

including dual power modules (AC/DC, dual AC, or dual DC modes) and triple fan heat dissipation. Operational Temperature : Hardened for industrial environments, operating from –40ºC to +65ºC Huawei Carrier Key Advanced Features SDN & 5G Evolution

: Fully supports modern Software-Defined Networking (SDN) protocols like Segment Routing (SR/SRv6)

, EVPN, and VxLAN to simplify tunnel technology and improve network efficiency. Network Slicing : Utilizes FlexE (Flexible Ethernet)

technology to divide physical ports into multiple sub-interfaces, ensuring service isolation and dedicated bandwidth for different traffic types. Precision OAM

: Features hardware-based OAM with detection intervals as low as

, enabling link failure detection within 10 ms and service switchover in less than 50 ms. Traffic Management : Includes a large device buffer (up to

) to handle sudden traffic bursts and prevent congestion-related quality degradation. Huawei Carrier Service & Management Capabilities

: Supports Y.1731, TWAMP, and IPFPM for end-to-end performance detection and fast fault location. Visualized O&M : Integrates with platforms like the Huawei iMaster NCE

(formerly U2000) for graphical service management and real-time quality monitoring. Huawei Carrier CLI configuration examples

Introduction

The Huawei ATN 910DA is a high-performance, compact, and versatile access node designed for fixed broadband and voice networks. As a key component of Huawei's Access Network (AN) portfolio, the ATN 910DA offers a wide range of interfaces and features to support various access technologies, including Gigabit Passive Optical Network (GPON), Ethernet Passive Optical Network (EPON), and Active Ethernet.

Datasheet Overview

The following datasheet provides an in-depth look at the Huawei ATN 910DA's specifications, features, and capabilities:

Hardware Specifications

Interfaces

  • Upstream Interfaces:
  • Voice Interfaces:

    • System Features

  • Switching Capacity: 128 Gbps
  • Forwarding Capacity: 96 Gbps
  • Quality of Service (QoS): Supports 8 queues with flexible scheduling

    • Network Features

    Management and Maintenance

    Protocols and Standards

    Certifications and Compliances

    Conclusion

    The Huawei ATN 910DA is a feature-rich, versatile access node designed for modern fixed broadband and voice networks. With its compact design, low power consumption, and scalable architecture, the ATN 910DA is an ideal solution for service providers seeking to deliver high-speed, reliable, and profitable services to their subscribers.

    Target Market

    The ATN 910DA is suitable for various applications, including: huawei atn 910da datasheet top

    Competitive Landscape

    The ATN 910DA competes with other access nodes from leading manufacturers, including:

    By analyzing the datasheet and features of the Huawei ATN 910DA, it is clear that this access node offers a robust and competitive solution for service providers seeking to upgrade their access networks and deliver high-speed services to their subscribers.

    Huawei ATN 910D-A industrial-grade, 1U case-shaped router designed specifically for 5G base station access VIP private line services

    . This high-performance device is part of a generation of routers built to bridge the gap between traditional packet-switched networks and the high-speed requirements of 3G, LTE, and 5G. Technical Specifications & Highlights Massive Capacity : It features an 800 Gbps switching capacity

    (evolvable to higher capacities in different configurations), making it a powerhouse for a compact 1U device. High-Density Interfaces : The port layout is designed for versatility, including: 4 x 100GE/50GE 16 x 25GE/10GE/GE 8 x 10GE/GE/FE 5G-Ready Features : Built with advanced networking protocols such as (Segment Routing over IPv6), (Flexible Ethernet) for network slicing, and

    (In-situ Flow Information Telemetry) for real-time monitoring. Precision Timing : Supports 1588v2 high-precision clock synchronization , critical for maintaining 5G base station performance. Rugged Design : Engineered to operate in extreme conditions ranging from -40°C to +65°C

    , allowing for outdoor cabinet deployment alongside wireless base stations. Redundancy : Equipped with dual DC/AC power supplies

    in a 1+1 backup configuration to ensure uninterrupted service. Deployment Use Cases The ATN 910D-A is primarily deployed in Mobile Backhaul (IPRAN)

    scenarios, where it acts as the "last-mile" access point for: 5G Base Stations

    : Handling the high-bandwidth uplink/downlink traffic required for next-generation mobile data. VIP Private Lines

    : Providing reliable, high-speed L2VPN and L3VPN connections for government, finance, and large enterprise clients. Integrated Service Access

    : Merging mobile data, home broadband (FMC), and enterprise services onto a single, simplified network platform. ATN910B - Huawei Carrier

    You're looking for information on the Huawei ATN 910DA datasheet. Here are some key features:

    Overview

    The Huawei ATN 910DA is a high-performance, next-generation aggregation and transport node (ATN) designed for metropolitan area networks (MANs). It's part of Huawei's ATN 900 series, which provides a range of products for various network applications.

    Key Features

    Here are some of the top features of the Huawei ATN 910DA:

    Technical Specifications

    Here are some detailed technical specifications of the Huawei ATN 910DA:

    Applications

    The Huawei ATN 910DA is suitable for various applications, including:

    The Huawei ATN 910 series, particularly the model, represents a specialized chapter in Huawei’s network infrastructure story: the rise of high-density, compact metro access routers designed for the transition to 4G, 4.5G, and 5G networks. Based on the technical specifications, here is the story of this device. The Problem: The Bottleneck at the Edge

    As mobile data exploded with smartphones and high-definition video, backhaul networks needed to evolve. Operators required routers that were small enough to fit into limited street-side cabinet space (1U height) but fast enough to handle massive 10GE traffic, while still supporting legacy E1 lines. (Compact Powerhouse) The was developed as a versatile, high-density solution.

    Highest Density: It claimed to have the highest 10GE port density in its class (1U height), making it a favorite for space-constrained sites. Capacity: It supports a switching capacity of , supporting a flexible combination of interfaces.

    Compatibility: It protects operator investment by being fully compatible with existing network infrastructure while allowing smooth upgrades to 4.5G. The Plot Points:

    Deployment: Deployed at the edge of mobile metro networks for rapid service provisioning.

    Functionality: Handles site-side aggregation for LTE base stations.

    Future-Proofing: Bridges the gap between traditional access and the high-speed requirements of 5G, providing a long lifespan in the field.

    In short, the story of the ATN 910 series is one of packing massive, high-speed switching power into a tiny, robust package to keep up with the world's insatiable demand for mobile data.

    To give you a more detailed story based on the technical specs, Explain the main differences between the and the older models? Focus on its specific use cases in 5G backhaul? ATN910C - Huawei Carrier

    Huawei ATN 910D-A is a high-capacity, 1U case-shaped router designed primarily for 5G base station access and VIP private line services. It is positioned as a 5G-oriented access layer product that supports high-density ports and advanced features like Segment Routing (SR/SRv6) and network slicing. Core Specifications System Capacity: 800 Gbps switching capacity. If you have parsed the Huawei ATN 910DA

    Dimensions: Standard 1U rack height (442 mm x 220 mm x 44.45 mm). Weight: Approximately 4 kg.

    Power: Supports dual DC/AC power inputs with 1+1 backup redundancy.

    Operating Temperature: Highly resilient range from -40°C to +65°C, making it suitable for outdoor deployment. Port Density and Connectivity

    The device offers high-density multi-rate interfaces to meet evolving network requirements: 4 x 100GE/50GE ports for high-speed uplinks. 16 x 25GE/10GE/GE ports for versatile service access. 8 x 10GE/GE/FE ports for broad compatibility. Key Technical Features

    5G-Ready Protocols: Native support for SRv6, EVPN, and FlexE (Flexible Ethernet) for efficient network slicing and service isolation.

    High-Precision Synchronization: Supports 1588v2, G.8275.1, and G.8275.2 clocking standards to meet strict 5G timing requirements.

    Advanced O&M: Utilizes iFIT (In-situ Flow Information Telemetry) and hardware-based BFD for real-time path restoration and millisecond-level fault detection.

    Reliability: Features 5-level H-QoS and various protection mechanisms like TI-LFA (Topology-Independent Loop-free Alternate) for sub-50ms failover times.

    For official technical documentation and support, you can visit the Huawei Enterprise Support Portal. ATN 910D-A Brochure v2.0 | PDF - Scribd

    The Huawei ATN 910D-A is a compact, case-shaped router designed for 5G base station access and VIP private line services. It is a high-capacity, 1U fixed multi-service access router that facilitates the transition to 5G-oriented networks through advanced features like SR/SRv6 and EVPN. Core Capabilities & Architecture

    Massive Switching Capacity: Provides an 800 Gbps switching capacity within a compact 1U form factor, supporting high-bandwidth 5G requirements.

    Flexible Port Density: Features high-density interfaces including 4 x 100GE/50GE, 16 x 25GE/10GE/GE, and 8 x 10GE/GE/FE ports as detailed in the ATN 910D-A Brochure.

    Programmable Architecture: Built on a programmable NP architecture that allows for smooth evolution and coexistence of traditional MPLS with next-gen protocols.

    Network Slicing: Utilizes FlexE-based slicing to isolate services, ensuring that different applications (like eMBB or URLLC) do not interfere with each other while sharing physical ports. Technical Specifications Form Factor

    1U height, 300mm depth for easy installation in base station cabinets. Operating Temperature

    Designed for harsh environments, supporting a wide range from -40°C to +65°C. Clock Synchronization

    High-precision 1588v2, G.8275.1, and synchronous Ethernet support for mobile packet bearer networks. Reliability

    Dual AC/DC power supply with 1+1 backup for carrier-grade availability. Service Support

    Integrated Layer 2 and Layer 3 features including SR/SRv6, EVPN, and iFIT for real-time performance monitoring. Official Documentation & Support

    Datasheets & Brochures: For detailed hardware parameters and networking applications, refer to the ATN 910D-C Universal Service Router Datasheet or download materials from Huawei Enterprise.

    Maintenance & Configuration: Professionals can access the latest software versions and troubleshooting insights through the Huawei ATN 910D Support Guide.

    Carrier Specifics: Information regarding base station bearer and last-mile FMC integration is available at Huawei Carrier.

    Security Compliance: The ATN series meets rigorous security targets, as outlined in the Security Target - Common Criteria document. or , to see which fits your specific network layer?

    The Huawei ATN 910D-A is a compact, high-capacity 1U router designed primarily for 5G mobile backhaul and VIP private line services. Key Technical Features

    Massive Switching Capacity: Provides an 800 Gbps switching capacity within a compact 1U form factor.

    High-Density Interfaces: Supports a diverse range of ports, including 4 x 100GE/50GE, 16 x 25GE/10GE/GE, and 8 x 10GE/GE/FE.

    5G-Ready Protocols: Fully supports next-generation features such as SRv6 (Segment Routing over IPv6), EVPN, and FlexE (Flexible Ethernet) for network slicing.

    Precision Synchronization: Built-in 1588v2 high-precision clock synchronization, essential for 5G network performance.

    Intelligent O&M: Features iFIT (In-situ Flow Information Telemetry) for real-time performance monitoring and millisecond-level fault detection. Physical & Environmental Specs

    Compact Design: Standard 19-inch width (442mm) with a shallow depth of 220mm, allowing it to fit in 300mm deep cabinets alongside wireless base stations.

    Ruggedized Performance: Operates in extreme temperatures ranging from -40°C to +65°C, making it suitable for harsh outdoor environments.

    Power Reliability: Supports 1+1 redundancy for both AC and DC power inputs. The top selling points – fanless operation, -40°C

    For more technical guides or software packages, you can visit the Huawei Support Page . Huawei ATN 910D-A Support Guide, Manuals & PDF

    A router is only as good as its software. The ATN 910DA runs Huawei VRP8 (Versatile Routing Platform), the same operating system used in carrier-grade NE series routers. The top protocol stack includes:

    display device                    # Check model, power type (DC/AC)
display interface brief           # See port status
display clock source sync-e state # Verify SyncE lock
display mpls oam egress verify    # Validate MPLS-TP OAM
display version                   # Show firmware (required for 1588v2 support)

    Conclusion: The ATN 910D-A is a proven, rugged MPLS-TP access switch for sub-1G aggregation in harsh environments. However, for any greenfield deployment beyond 2023, migrate to the ATN 912D or CloudEngine series to gain 10G uplinks and modern SDN control. Always refer to the official Huawei ATN 910D Hardware Description and Datasheet (v2.7 or later) for absolute electrical and regulatory compliance.

    Huawei ATN 910D-A compact, high-capacity 1U fixed-port router designed for 5G-ready access VIP private line

    . It is part of the Huawei ATN series, offering a transition path for carriers from traditional MPLS to advanced SRv6 architectures. Huawei Carrier Core Specifications Switching Capacity: Dimensions: 442 mm x 220 mm x 44.45 mm (Standard 1U height). Approximately 4.2 kg (DC) to 4.3 kg (AC). Operating Temperature: Industrial-grade range of -40°C to +65°C

    , making it suitable for outdoor cabinet deployments alongside base stations. Power Redundancy: Supports dual DC or AC power inputs with 1+1 backup. High-Density Port Configuration

    The device provides a diverse range of high-speed interfaces to meet 5G site requirements: 4 x 100GE/50GE uplink ports. 16 x 25GE/10GE/GE 8 x 10GE/GE/FE Key Deep Features Advanced Networking Protocols: Fully supports modern SDN features including Segment Routing (SR/SRv6) , EVPN, and VxLAN for smooth network evolution. Network Slicing (FlexE): FlexE-based slicing

    to implement flexible bandwidth allocation and strict service isolation on a single physical port. High-Precision Synchronization: IEEE 1588v2

    and G.8275.1/G.8275.2 clock synchronization, critical for 5G mobile packet bearer networks. Intelligent O&M: In-situ Flow Information Telemetry (iFIT)

    for real-time, millisecond-level in-band flow detection, enabling intelligent fault demarcation. Reliability:

    Achieves fast fault-triggered switchover (TI-LFA) in less than with zero-loss recovery during link failures. ATN 910D-A specifically against other models in the 910 series or see a detailed port mapping ATN 910D-A Brochure v2.0 | PDF - Scribd

    The Huawei ATN 910D-A is a compact, high-performance 1U case-shaped router designed for 5G base station access and VIP private line services. As part of the ATN series, it offers a massive 880Gbps switching capacity within a 220mm deep chassis, making it ideal for large-scale deployment in space-constrained cabinets. Key Technical Specifications

    The ATN 910D-A is engineered to meet 5G-ready requirements with high-density interfaces and industry-leading reliability features. Feature Specification System Capacity Dimensions (H x W x D) 44.45 mm (1U) x 442 mm x 220 mm Weight ~4.2 kg (DC) / ~4.3 kg (AC) Typical Power Consumption Operating Temperature -40°C to +65°C Power Supply Dual DC/AC, 1+1 backup Heat Dissipation 3 fans, 2+1 backup (left-to-right airflow) Interface Density The device supports a versatile range of high-speed ports: 4 x 100GE/50GE 16 x 25GE/10GE/GE 8 x 10GE/GE/FE Core Advanced Features

    Future-Ready Protocols: Supports SR-MPLS and SRv6 for smooth network evolution, alongside EVPN and FlexE for network slicing.

    High-Precision Synchronization: Fully supports 1588v2, G.8275.1, and G.8275.2 to solve clock coverage issues in mobile packet networks.

    Intelligent O&M: Features iFIT (In-situ Flow Information Telemetry) for real-time service path restoration and millisecond-level fault detection via hardware-based BFD.

    Hardware Slicing: Divides physical ports into multiple slices to implement flexible bandwidth allocation and service isolation. Typical Application Scenarios

    The ATN 910D-A is primarily used in mobile backhaul for 2G/3G/4G/5G and for VIP Private Line services. Its ability to withstand extreme temperatures (-40°C to +65°C) allows for outdoor deployment or shared cabinets with wireless Base Band Units (BBUs).

    Are you planning to deploy this router for 5G backhaul or for private line aggregation? Huawei Carrierhttps://carrier.huawei.com ATN Series - Huawei Carrier

    Huawei ATN 910D-A is a compact, high-capacity 1U fixed multi-service access router designed for 5G base station access and VIP private line services. It belongs to the ATN 910D series, providing a high-performance solution for the aggregation and access layers of mobile transport networks. Huawei Carrier Key Specifications Switching Capacity : Supports up to depending on the configuration. Port Density 4 x 100GE/50GE 16 x 25GE/10GE/GE 8 x 10GE/GE/FE Physical Form Factor

    : 1U height with a 220 mm depth (442 mm x 220 mm x 44.45 mm), making it suitable for standard cabinets and outdoor deployments. : Approximately 4.2 kg to 4.3 kg (without packaging). Top Features 5G-Ready Architecture : Supports critical 5G features including (Segment Routing over IPv6), (Flexible Ethernet) for network slicing, and

    (In-situ Flow Information Telemetry) for real-time monitoring. High-Precision Timing : Implements

    and synchronous Ethernet clock synchronization, essential for mobile packet transport networks. Reliability & Redundancy : Features 1+1 backup

    for both DC and AC power inputs. It includes an integrated fan tray with 2+1 redundancy, supporting left-to-right airflow. Industrial-Level Design

    : Built to operate in harsh environments with a wide temperature range of -40°C to +65°C Deployment Ease : Supports Plug-and-Play (PnP)

    functionality, enabling automated service provisioning without the need for on-site commissioning. Huawei Carrier Typical Application Scenarios 5G Transport : Carrying 2G/3G/4G/5G mobile backhaul traffic. FMC Integrated Access

    : Implementing last-mile Fixed-Mobile Convergence (FMC) for high-value private lines. Network Evolution

    : Facilitating the transition from traditional MPLS to SR-MPLS and SRv6 architectures. Huawei Carrier ATN 910D-A with other models in the series, such as the ATN Series - Huawei Carrier

    Here is the comprehensive Huawei ATN 910D-A Datasheet content, structured as a professional product specification sheet. This information is compiled based on publicly available Huawei documentation, hardware specs, and typical industry data for this model.

    Note: The exact model "ATN 910DA" is often a variant of the ATN 910D series (sometimes referred to as the 910D-A or 910Dc). The following represents the standard hardware capabilities for this compact access router.

    | Parameter | Range | |-----------|-------| | Operating temperature | –40°C to +65°C | | Storage temperature | –40°C to +85°C | | Humidity | 5% to 95% (non-condensing) | | Altitude | up to 4000 m | | MTBF | > 150,000 hours |