If you have landed on this page, you are likely facing a frustrating but common issue: your computer is displaying an error message that begins with “i---” (often appearing as i--- or i--- Communication Error) when trying to connect to your Jinka 1351 Cutting Plotter. Alternatively, you might be searching for the correct driver software to get this machine up and running.
This comprehensive guide will walk you through everything you need to know about the Jinka 1351 driver, how to fix the "i---" error, and the safest way to download compatible software for Windows 10, 11, and older systems.
The Jinka 1351 Cutting Plotter is a reliable workhorse in the vinyl cutting industry. However, finding the correct driver for modern operating systems like Windows 10 or Windows 11 can be a challenge. If your computer fails to recognize the plotter via USB, or if the cutter performs erratic movements, you likely need to update or reinstall the driver. This page provides a direct download link for the Jinka 1351 driver, along with a step-by-step installation guide to get your machine back to work.
Searching for “i--- Download Driver Cutting Plotter Jinka 1351” might lead you to suspicious sites like driver-fixer.com or mydriversdownload.net. These are dangerous because:
Always download from WCH.cn (official chip maker) or your plotter’s original CD.
Critical Note: The Jinka 1351 rarely uses a traditional “printer driver.” Instead, it uses a USB-to-Serial bridge driver. If your software communicates via COM port emulation, the correct driver is almost always the CH340/CH341 driver.
If you own a Jinka 1351, do not panic if you cannot find a driver with that exact name. The machine is likely a clone of the Creation PCut CT series.
Download recommendation: Look for "Creation PCut Driver" or "CH340 USB Driver". Once the port is established, select Creation PCut as your plotter model in your design software. It is a solid piece of kit, provided you are willing to do a little technical troubleshooting to get it recognized.
To successfully set up your Jinka 1351 Cutting Plotter , you must download the specific driver for your model and operating system to enable communication between your design software and the hardware. 1. Download Driver
You can find drivers from authorized regional distributors or the manufacturer's support portals.
Direct Download Links: Verified drivers are often hosted on Jinka Indonesia Jinka XL PRO 1351 (Only Cut) Jinka PE PRO 1353/1351 (Auto Contour Cut)
Latest Version: Look for the stable release (e.g., v2.4) for Windows 10 or 11. 2. Installation Guide
Preparation: Unplug the plotter and other non-essential USB devices to avoid COM port conflicts.
Extract Files: Use software like WinRAR or 7-Zip to extract the downloaded ZIP folder.
Run as Admin: Right-click setup.exe and select Run as Administrator to ensure proper registry permissions. Port Configuration:
Open Device Manager and expand Ports (COM & LPT) to identify the plotter's assigned port.
In your cutting software (e.g., SignMaster or Artcut), manually assign this port (usually COM3). 3. Key Specifications Max Feed Width Max Cutting Width 1210 mm to 1260 mm (depending on specific sub-model) Cutting Speed 10–800 mm/s Cutting Force 10–500 g (digital adjustment) Compatible OS Windows XP, Vista, 7, 8, 10, 11 4. Compatible Software
CorelDRAW & Adobe Illustrator: Typically used via plugins like PlotCalc or XFCut.
Dedicated Cutting Programs: Often bundled with Jinka Cut, SignMaster, or AnyCut. Driver Jinka 1351 Download - Facebook
However, I’m unable to provide direct download links or promote features of driver downloads from unofficial sources because:
If you need help with this plotter, I can instead:
The Jinka 1351 is a large-format cutting plotter known for its versatility in handling materials like vinyl, adhesive film, and cardstock. To use this machine, you must install a specific USB-to-serial driver to allow your computer to communicate with the hardware. Driver Download and Software Selection Driver Jinka 1351 28 - Facebook
Introduction
The Jinka 1351 cutting plotter driver is a software designed to control and operate the Jinka 1351 cutting plotter, a device used for cutting various materials such as vinyl, paper, and fabric. The driver software enables users to send print jobs to the plotter, control its settings, and monitor its performance.
Key Features
Advanced Features
System Requirements
User Interface
The Jinka 1351 cutting plotter driver features a user-friendly interface that allows users to easily navigate and access its various features. The software includes:
Technical Support
The Jinka 1351 cutting plotter driver comes with technical support, including:
Driver Download Review: Cutting Plotter Jinka 1351
Overview
The Cutting Plotter Jinka 1351 is a popular cutting plotter designed for various industries, including sign-making, vinyl cutting, and craft applications. To ensure optimal performance, it's essential to download and install the correct driver. In this review, we'll discuss the importance of downloading the right driver and provide an overview of the Cutting Plotter Jinka 1351.
Importance of Correct Driver
Downloading the correct driver for your Cutting Plotter Jinka 1351 is crucial for:
Downloading the Driver
To download the driver for your Cutting Plotter Jinka 1351, follow these steps:
Driver Features and Benefits
The Cutting Plotter Jinka 1351 driver offers several features and benefits, including:
Common Issues and Troubleshooting
If you encounter issues with your Cutting Plotter Jinka 1351 driver, try:
Conclusion
Downloading the correct driver for your Cutting Plotter Jinka 1351 is essential for optimal performance, accurate cutting, and compatibility. By following the steps outlined in this review, you can ensure that your cutting plotter operates at its best. If you encounter any issues, refer to the troubleshooting section or contact the manufacturer's support team.
Downloading and Installing the Jinka 1351 Cutting Plotter Driver: A Comprehensive Guide
Are you in search of a reliable and efficient cutting plotter driver for your Jinka 1351 device? Look no further! In this article, we will walk you through the process of downloading and installing the Jinka 1351 cutting plotter driver, ensuring that you can optimize your device's performance and streamline your workflow.
Introduction to the Jinka 1351 Cutting Plotter
The Jinka 1351 cutting plotter is a high-performance device designed for precision cutting and plotting applications. With its advanced features and robust construction, this device has become a popular choice among professionals and hobbyists alike. However, to unlock its full potential, you need to install the correct driver software.
Why Do You Need a Cutting Plotter Driver?
A cutting plotter driver acts as a bridge between your computer and the Jinka 1351 device, enabling seamless communication and data transfer. The driver software converts print data from your computer into a format that the cutting plotter can understand, allowing you to produce high-quality cuts and plots with precision and accuracy.
Downloading the Jinka 1351 Cutting Plotter Driver
To download the Jinka 1351 cutting plotter driver, follow these steps:
Step-by-Step Download and Installation Process
Once you have downloaded the driver software, follow these steps to install it:
For Windows Users:
For macOS Users:
Configuring the Jinka 1351 Cutting Plotter Driver
After installing the driver software, you may need to configure the settings to optimize your device's performance. Follow these steps:
Troubleshooting Common Issues
If you encounter any issues during the download or installation process, refer to the troubleshooting section below:
Conclusion
In conclusion, downloading and installing the Jinka 1351 cutting plotter driver is a straightforward process that requires attention to detail. By following the steps outlined in this article, you can ensure that your device is properly configured and optimized for high-quality cutting and plotting applications. If you encounter any issues or have further questions, do not hesitate to contact the manufacturer's support team or consult the user manual.
i--- Download Driver Cutting Plotter Jinka 1351
By searching for "i--- Download Driver Cutting Plotter Jinka 1351," you can find various online resources and websites that offer the driver software for download. However, be cautious when downloading from third-party websites, and ensure that you verify the file's integrity and authenticity to avoid any potential security risks.
Downloads and Resources
By following this comprehensive guide, you can successfully download, install, and configure the Jinka 1351 cutting plotter driver, ensuring optimal performance and precision cutting and plotting applications.
To download the driver for the JINKA 1351 cutting plotter , you should ideally use the official manufacturer or authorized distributor resources to ensure compatibility and system security. Driver Download Sources Manufacturer Support
: The primary source for official drivers is through the manufacturer's regional support sites, such as the Jinka Indonesia Support
, which often hosts version-specific files like "Jinka_1351_Driver_v2.4_Win10_x64.zip". USB Controller Drivers
: Most Jinka plotters use a CH340 or CH341 USB-to-Serial chip. If your computer doesn't recognize the plotter when plugged in, you may need the CH341SER.EXE driver from Nanjing Qinheng Microelectronics. Specific Model Variants
: Ensure you select the correct version for your hardware; for example, the JINKA PRO 1351 may require different files than the JINKA PRO 1351 SA (Semi-Auto Contour). Nanjing Qinheng Microelectronics Co., Ltd. Installation Steps Prepare the System
: Disconnect all other USB devices to avoid COM port conflicts and uninstall any previous plotter drivers through the Windows Device Manager. Extract and Run
: Download the driver ZIP file, extract it using a tool like WinRAR, and run the Administrator Port Configuration
: Once installed, check your Device Manager under "Ports (COM & LPT)." The plotter typically works best on with a bit rate of and Flow Control set to Software Integration : If you are using software like SignMaster
or Flexi, select the corresponding Jinka 1351 model in the production manager and match it to the COM port identified in Step 3. SignMaster or Artcut) once the driver is installed? Driver Jinka 1351 28 - Facebook
To successfully download and install the driver for your Jinka 1351 cutting plotter
, you must first identify your specific model variant (e.g., standard "Only Cut" or "Auto Contour Cut"), as they require different software packages. 1. Official Download Resources
You can access official drivers and setup software from manufacturer and community support sites: Jinka Indonesia (Official)
: Provides direct download links via Google Drive for various versions, including the JK/XL Only Cut
: Offers specialized plugins and software for models like the JinKa XE-1351 , specifically optimized for use with SignTools 4 : Maintains dedicated setup instructions Jinka JK1351 , including serial (COM) cable requirements 2. Installation Steps
Follow these steps to ensure your computer correctly communicates with the plotter: Extract the Files
: Download the driver package and extract it using a tool like : Open the folder and double-click i--- Download Driver Cutting Plotter Jinka 1351
. Follow the on-screen prompts to choose your language and installation directory. USB Connection : If connecting via USB, you must install the USB driver
first to create a virtual COM port. Windows may attempt to install it automatically if the hardware is plugged in during a restart Verification : After installation, check the Device Manager Ports (COM & LPT) to ensure " JINKA 1351 " is listed 3. Software Compatibility & Settings Jinka 1351
is compatible with several professional design and cutting applications: Software for JinKa JK-1351PE plotter - PlotCalc 2 Dec 2025 —
To download the driver for the Jinka 1351 cutting plotter Go to product viewer dialog for this item.
, you should primarily use the official resources provided by the manufacturer or their regional distributors to ensure compatibility and system safety. Driver Download Sources
Jinka Indonesia Official: The most reliable source for various models including the JK and XL series. Access the Download Link Library which hosts drivers for: Jinka JK/XL (Cut Only) Jinka XL 2022 (Semi-Auto Contour) (Only Cut/Semi-Auto)
PlotCalc Software: Offers dedicated plug-ins and drivers specifically for the JinKa XE-1351 and models, particularly for integration with CorelDRAW.
SignCut Freshdesk: Provides generic USB drivers for SignCut-compatible plotters which often include Jinka models. Installation Steps
Download & Extract: Download the driver matching your specific model (e.g.,
). Extract the compressed file (ZIP or RAR) using tools like WinRAR or 7-Zip.
Run Setup: Open the folder and run setup.exe as an administrator. Follow the on-screen prompts to select your preferred language and installation path.
Connect Hardware: Plug your plotter into the computer using a USB or COM cable. If using USB, the system should recognize it as a new "USB Serial Port" in the Device Manager.
Software Configuration: Open your cutting software (CorelDRAW, Artcut, or SignMaster). In the device settings, select the correct model name and the COM port assigned to the plotter. Technical Specifications (Model 1351PE) Maximum Feed Width: 1350mm. Maximum Cutting Width: 1210mm. Speed/Force: Up to 800mm/s with 10-500g force.
OS Compatibility: Supports Windows XP, Vista, 7, 8, 10, and 11. Driver Jinka 1351 28 - Facebook
Jinka 1351 cutting plotter is a popular entry-level machine for stickers, decals, and t-shirt vinyl. To get it running, you must install the correct USB-to-serial driver so your computer can recognize the machine's COM port. 🛠️ Step-by-Step Driver Installation Identify Your Model: The Jinka 1351
comes in various versions, including "Only Cut" (JK/XL series) and "Semi-Auto Contour Cut" (XL Pro series).
Download the Driver: Use the Official JINKA Indonesia Download Center to find the specific driver for your model. Alternatively, some users recommend downloading directly from Jinkatech Support to avoid outdated third-party files.
Clean Previous Drivers: Before installing, open Device Manager on your PC and uninstall any existing "USB Serial Port" or "Plotter Controller" entries to avoid port conflicts.
Run as Administrator: Extract the .zip file, right-click the setup.exe, and select Run as Administrator.
Assign the Port: During setup, manually assign the plotter to COM3 if possible, as this is a standard stable port for vinyl cutters. 💻 Software Compatibility Operating Systems: The Jinka 1351 is compatible with Windows XP, 7, 8, 10, and 11.
Design Tools: Most users run the machine through Artcut , CorelDraw (via the PlotCalc plugin ), or SignMaster .
Mobile/Advanced Options: For Mac users or those wanting more advanced features, SignCut Pro 2 supports over 1,200 models, including the Jinka series. 💡 Pro Tips for Setup Software for JinKa XE-1351 plotter - PlotCalc
The Jinka 1351 is a popular, budget-friendly vinyl cutting plotter used by small sign-making businesses and hobbyists. It typically features a 135 cm cutting width, supports manual or auto registration mark reading for contour cutting, and communicates with PCs via a USB port or serial (COM) port.
However, like many Chinese-manufactured plotters (often rebranded as Liyu, Pulinx, or GCC clones), the driver installation is not automatic. Users frequently encounter the dreaded “i---” error on the plotter’s LCD screen or within the cutting software (e.g., SignMaster, ArtCut, FlexiSIGN).
Looking for the Jinka 1351 cutting plotter driver? Download the latest USB driver and setup files for Windows 7/10/11. Includes installation guide and port configuration tips.
| Step | Action | Status | | :--- | :--- | :--- | | 1 | CH341 driver installed (check Device Manager) | ✅ / ❌ | | 2 | Jinka 1351 powered ON before USB connection | ✅ / ❌ | | 3 | USB cable length < 2 meters | ✅ / ❌ | | 4 | Software COM port matches Device Manager (e.g., COM3) | ✅ / ❌ | | 5 | Baud rate = 9600 in both plotter menu and software | ✅ / ❌ | | 6 | Test cut sent from software, not from Windows printer | ✅ / ❌ |