X100 | Icopykey

The iCopyKey X100 is a handheld key programmer and cloner designed primarily for automotive locksmiths, car dealerships, and DIY enthusiasts. Manufactured by Xhorse (a prominent name in key programming technology, often associated with VVDI tools), the X100 sits in the "mid-range" category of programming tools.

It bridges the gap between basic key duplicators and high-end, expensive diagnostic tablets. Its primary function is to generate remote keys, clone transponders, and program immobilizer systems for a wide variety of vehicle makes.

The iCopyKey X100 is a useful budget tool for cloning older transponders and fixed-code remotes. It is not a full immobilizer programmer. For most cars made after 2010, you’ll need an OBD programmer. However, for garages, gates, older motorcycles, and vintage cars, the X100 works reliably and quickly.

Need more help? Join the KeyDIY X100 group on Facebook or visit KeyDIY.net for firmware and blank compatibility lists.

iCopyKey X100 is a handheld, multi-frequency RFID and NFC duplicator designed to clone access control cards, key fobs, and elevator tags. It features a 3.2-inch full-color TFT screen

and supports a wide range of frequencies, from 125KHz to 13.56MHz. 1. Getting Started Powering the Device : Open the back compartment and insert 4 AAA batteries . Alternatively, you can power it via a USB-C cable connected to a 5V source. Turning On : Press the red Power button . You will be greeted by a disclaimer screen; press to reach the main menu. 2. How to Copy a Card (Standalone Mode)

For standard, unencrypted tags (like EM4100 or 125KHz fobs), you can use the device without a computer. : Place the original card on the rear induction zone (for ID/IC full frequency) and press the

: A beep and the prompt "Read successful!" will appear, showing the card's ID and frequency. : Remove the original, place a compatible blank card (e.g., T5577 or UID) on the reader, and press the

: The screen will display "Write and verify successful!" once complete. 3. Using PC/Mobile Software (For Encrypted Cards)

Current key cloning tools require multiple steps, different cables, or online server access. The X100 often lacks a “set it and forget it” mode for batch or repeated cloning, especially for older vehicles or lost-key situations.

The iCopy Key X100 isn't trying to replace a $3,000 AutoProPAD or a Smart Pro. It is a specialized scalpel for the most common job in locksmithing: making a spare when an original exists.

Rating: 4.2/5 Best for speed and value. Just know its limits.

Pro Tip: Always keep a stock of T5 transponders and iCopy Super Chips handy. The device is only as good as the blanks you feed it.

Disclaimer: This post is for educational purposes. Check your local laws regarding key duplication and vehicle access before purchasing professional locksmith tools.

iCopyKey X100 is a handheld RFID and NFC duplicator designed to clone access cards and key fobs. It supports multiple frequencies, including , making it compatible with various common smart chips. Device Setup : You can power the device using AAA batteries for portable use or via the USB Type-C port connected to a power source. Navigation : Use the direction buttons to select menu items and the "Scan/Read/Write" (S/R/W) button to execute actions. Induction Areas : The device typically has two separate areas—one for (13.56 MHz) and another for ID frequencies like 125 kHz. How to Clone a Card (Standard Process) Read the Original

: Place your original card or key fob on the RFID induction area and press the "Scan/Read/Write" Verify Success : The device will beep and display "Read successful!" once it identifies the card's frequency and data. Prepare Blank Card icopykey x100

: Remove the original and place a compatible blank card (e.g., a card for IC or a for ID) on the induction area. Write the Data : Press the "Scan/Read/Write" button again. The screen will show "Write and verify successful!" when the process is complete. Using PC Software (CopyKey Manager)

For encrypted cards that require deeper decryption, you must use the PC-based software. How to Copy or Clone Access Cards and Key Fobs - Kisi

iCopyKey X100 Go to product viewer dialog for this item. is a portable RFID and NFC duplicator designed to read, crack, and clone a wide variety of access control cards. It bridges the gap between simple handheld copiers and advanced professional tools like the Proxmark3, offering a 3.2-inch color screen and full-frequency support for both 125kHz and 13.56MHz systems. Key Features and Specifications

is built for versatility, handling most standard and some encrypted RFID protocols used in office buildings, apartment complexes, and parking garages.

Dual-Frequency Support: Operates on both 125kHz (ID) and 13.56MHz (IC/NFC) bands.

Decryption Engine: Capable of cracking semi-encrypted and some fully encrypted IC cards.

User Interface: Features a 3.2-inch HD color display with built-in voice broadcasts to guide users through the reading and writing process.

Power Options: Can be powered via AAA batteries for field use or through a Type-C USB cable when connected to a computer.

Connectivity: Supports "PC-Mode" for advanced operations via Windows software or an Android app. How to Use the iCopyKey X100

Operating the device is designed to be straightforward, even for non-technical users. Basic Card Cloning

Power On: Turn on the device and navigate the menu using the physical buttons.

Read Card: Place the original card on the sensing area at the back and select "Read" or "SmartClone".

Frequency Detection: The device automatically scans through frequencies to identify the card type.

Write Card: Once successfully read, replace the original card with a compatible blank tag (e.g., T5577 for ID or CUID for IC) and press "Write". Handling Encrypted Cards

If the device detects encryption, it will prompt you to connect to a computer: The iCopyKey X100 is a handheld key programmer

COPYKEY X100 Smart Card Replicator User Manual - device.report

The iCopyKey X100 is a professional-grade, handheld RFID and NFC duplicator designed to read, write, and decrypt a wide range of access control cards and key fobs. Key Features

Broad Compatibility: Supports multiple frequencies including 125kHz to 1000kHz (ID) and 13.56MHz (IC/NFC), making it compatible with HID, MIFARE (S50/S70), and various chip types like T5577 and EM4305.

Stand-Alone or PC-Linked: Features a 2.8-inch color display for handheld use. It can also connect to a computer or Android device via USB for advanced decryption and software-based operations.

Dual Reading Zones: Includes a front reader for IC (NFC) cards and a rear reader for ID/HID cards to ensure accurate data capture.

Encryption Support: Capable of decrypting many encrypted IC cards without requiring a persistent network connection. How to Use the iCopyKey X100

Read: Place the original card on the device's sensing area (front or rear depending on card type) and press the 'READ' button or use the PC software to extract the data.

Verify: Once read, the screen or software will display the card's ID or sector data.

Write: Remove the original card and place a compatible blank writable card (e.g., T5577 for ID or CUID for IC) on the reader. Press 'WRITE' to transfer the data.

Confirm: A "Write successfully!" message will appear on the device's user interface once the clone is complete. iCopy X100 - Handheld RFID Chip and Card Reader - Neven7

In the dimly lit basement of the North-Hill apartment complex,

gripped the iCopyKey X100 like a lifeline. He wasn’t a thief, but a man who had been locked out of his own life by a faulty magnetic strip and a management office that didn't open until Monday.

Leo fired up the device. The 3.2-inch full-color screen flickered to life, illuminating his face with a cool blue glow. He reached into his pocket and pulled out his neighbor's spare key fob—a standard 125 kHz RFID tag.

"Just one minute," he whispered, placing the borrowed tag onto the black "READER" square. A sharp beep echoed through the concrete room, and the screen flashed a triumphant green. The Go to product viewer dialog for this item.

had done its job; the "Smart Copy" function had successfully decrypted the tag’s unique signature, slicing through the basic security like a hot knife through butter. The Replication The iCopyKey X100 is a useful budget tool

He reached for a blank T5577 rewritable fob he’d bought for a few dollars online. His hands were shaking. If the write failed now, he’d be sleeping in his car for another two nights. He selected the "WRITE" prompt from the menu.

Alignment: He adjusted the blank fob over the sensing area, ensuring it was flush against the rugged plastic casing.

Execution: He pressed the blue button. The indicator light turned a steady yellow, then finally, a solid green.

Verification: A voice broadcast from the internal speaker confirmed the process was complete.

Leo climbed the stairs to the lobby. The heavy glass door stood between him and his warm apartment. He held his newly minted clone to the reader. Click. The magnetic lock disengaged with a satisfying thud. He was in.

As he stepped inside, he looked back at the small, handheld tool in his palm. It was just a simple replicator intended for security professionals and technicians. But to Leo, at that moment, it was the key to his entire world. handles encrypted IC cards? 5YOA iCopy X100 RFID Copier/Writer User Manual

Q: Can the X100 program a new key when the original is lost?
A: Only if you know the chip type and the vehicle uses a simple fixed-code system (rare after 2000). Otherwise, no.

Q: Does it work on BMW, Ford, Mercedes, or Toyota 2018+?
A: Generally no – those require dealer-level tools (e.g., Autel, Xhorse, Zed-Full). The X100 works on older or non-immobilized systems.

Q: What blanks should I buy for cloning?
A: “T5” programmable transponder (also called JMD or KeyDIY T5). For remotes, buy iCopyKey compatible fixed-code remotes for your frequency (315/433/868 MHz).

Q: Why does it say “Copy Prohibit”?
A: Some transponders (like Hitag3 with password) are locked by the manufacturer to prevent cloning.

The iCopyKey X100 is best described as a specialist tool for the price-conscious professional.

It is not a replacement for a full diagnostic scanner. Instead, it is a dedicated "key machine." For a full-time auto locksmith, the X100 is an essential backup tool or a primary tool for specific Japanese and American models. For a general mechanic or a DIYer, it offers an affordable entry point into key programming without requiring a subscription to expensive dealer-level software.

Final Recommendation: If your primary business model involves unlocking cars, cutting keys, and programming remotes, the X100 offers excellent value for money. However, if you need a tool to diagnose engine faults, airbag lights, and ABS modules alongside key programming, you should look toward a more expensive, multi-function diagnostic tablet.

| Item | Description | |------|-------------| | Main unit | 2.4" color screen, built-in battery | | USB cable | Charging (PC/laptop) | | 12V car adapter | Alternative charging | | Probe antenna | External coil for reading/writing transponders | | Remote receiver | 315/433 MHz for copying remotes (depends on version) | | User manual | Brief instructions |

Initial setup: