The version iGO Primo 2.0.1 (9.6.7.281004) is a specific build of the iGO navigation software often associated with the Explay Infinity II smartphone or similar GPS-enabled devices. Status and Updates
Official Support: Direct download links for this specific older version are rarely available on manufacturer sites like iGO Navigation.
Updates: To update maps or software for an iGO-based device, you typically need to use the Naviextras Toolbox, which is the official portal for map updates and content management.
Installation: Users typically install iGO by loading the software onto a MicroSD card, performing the initial setup on the device, and then registering the product to redeem any prepaid codes or purchase new maps. Key Specifications Software Version: 2.0.1 (Build 9.6.7.281004).
Device Compatibility: Optimized for Android-based devices like the Explay Infinity II.
Backup Recommendation: Before attempting to modify or update the software, it is highly recommended to create a full backup of your current SD card data using tools like the Rostra iGO Primo update procedure. iGo primo Map Update Procedure - Rostra
The keyword "igo primo 201 967281004 explay infinity ii link" refers to a specific version of the iGO Primo navigation software (v2.0.1, build 9.6.7.281004) optimized for the Explay Infinity II
smartphone. This combination was popular among users seeking a lightweight, offline-capable GPS solution that fits the device's specific hardware and screen resolution. iGO Primo v9.6.7.281004 Overview
This particular build of iGO Primo is known for its stability on Android-based devices like the Explay Infinity II
. iGO Navigation is highly regarded because it uses significantly less storage than other modern apps while providing high-resolution maps and advanced offline features. Key features of this version include:
Offline Mapping: Guides users across continents without requiring a Wi-Fi or data connection.
Performance: Accelerated route calculation and reduced storage requirements.
Address Search: Capability to find addresses directly from contact lists or through quick search buttons for gas, parking, and restaurants.
Fuel Monitoring: Built-in tools to monitor fuel consumption during trips. Installation on Explay Infinity II To install this software on an Explay Infinity II
or similar Android device, users typically follow these steps:
Prepare Storage: Insert a MicroSD card into the device. Most installers recommend a dedicated card for map data.
File Management: Copy the iGO folder containing the necessary map data and the APK installation file to the SD card.
App Installation: Use a tool like ES File Explorer to locate the APK file on the SD card and run the installation.
Path Configuration: In some versions, you must manually set the "Navigation Path" in the system settings to point to the igo.exe or APK file. Map Updates and Maintenance
Maintaining current maps is crucial for accurate navigation. For the Explay Infinity II
, official updates are generally handled through the Naviextras Toolbox, which requires a Windows-based PC.
Backup: Always create a complete backup of the SD card data before attempting an update.
Free Updates: Users can search for free map updates by selecting the "UPDATE" tab within the Naviextras software.
Security: When downloading APKs from third-party sites, ensure they have been scanned by services like VirusTotal to prevent malware. Why This Specific Version?
The build 9.6.7.281004 was often distributed as a pre-installed or specifically patched version for Russian-market devices like the Explay Infinity II igo primo 201 967281004 explay infinity ii link
. It was favored for its compatibility with the device’s screen resolution and its ability to handle local map providers like Navteq. iGO Navigation - Apps on Google Play
The iGO Primo 201 967281004 on the Explay Infinity II Link is a time capsule of mid-2010s dedicated GPS technology. For its era, it offered excellent routing and a clean interface. Today, it’s a usable backup device — provided you can source recent maps.
If you find one in a bargain bin or your glovebox, it’s worth keeping as a no-internet-required co-pilot. Just don’t expect smartphone-like responsiveness or live updates without tinkering.
iGO Primo 2.0.1 (9.6.7.281004) a specialized version of the navigation software originally released for the Explay Infinity II smartphone
, though it was later adapted by the community for wider Android use. Key Features of this Build Android Compatibility : Specifically designed for Android 2.2 and higher , making it suitable for older devices or car head units. Resolution Support : This "Explay" version is known for supporting all screen resolutions
(multi-resolution), which is crucial for modern high-definition displays or non-standard car dashboard screens. Offline Navigation
: Includes a full-service GPS engine that operates without a data connection, featuring 3D landmarks, Points of Interest (POIs), and voice guidance. Legacy Performance
: Often preferred by hobbyists for its lower resource consumption compared to newer "Nextgen" versions, though it may require manual configuration of the file to function correctly on newer hardware. Finding and Installing the Link
Because this specific version (9.6.7.281004) is a legacy OEM build from 2013, it is not available on official stores like Google Play
. You can typically find discussions and download archives on enthusiast forums such as: Multimediaforum.de : A primary source for this exact Explay Infinity II build.
: These communities host the specific APK and data files needed for manual installation. Important Installation Note To use this version, you typically need the content folder
(containing maps, licenses, and global_cfg) placed in your device's root directory or SD card. You may need to enable "Unknown Sources" in your device settings to install the APK. Do you need help with the sys.txt configuration for a specific screen resolution or device?
iGO Primo 2.0.1 9.6.7.281004 Explay Infinity II (07 Feb 2013) 7 Feb 2013 —
Title: IGO Primo 2.0 (9.6.7.281004) on Infinity II Link – Need help with resolution/skin
Post:
Hi everyone,
I’m trying to get iGO Primo 2.0 (specifically build 9.6.7.281004) working properly on my Infinity II Link head unit.
A bit of background:
Issues I’m facing:
What works:
What I’ve tried:
Does anyone have a working sys.txt or skin for iGO Primo 9.6.7.281004 on an Infinity II Link? Also, is there a way to get the "Link" feature to pass internet traffic for live traffic updates?
Thanks in advance!
(P.S. – If you have a working download link for the explay version of this build, please PM me.) The version iGO Primo 2
The following report outlines the technical specifications and integration of the navigation software with the Explay Infinity II smartphone. Product Overview Explay Infinity II
is a dual-SIM Android smartphone released around early 2013. It was marketed as a high-value device, featuring a Super AMOLED Plus display and a pre-installed, licensed version of the navigation system. mobilmarket.ru Software: iGO Primo 2.0.1 (Build 9.6.7.281004) The specific build mentioned, 9.6.7.281004
, is a version of iGO Primo 2.0.1 optimized for mobile devices. Offline Functionality
: Unlike many modern navigation apps, iGO Primo is designed for offline use
, meaning it does not require a constant cellular data connection to provide turn-by-turn guidance. Mapping Data
: The software typically includes full maps of the Russian Federation, provided by (now part of HERE Technologies). Key Features
: Supports 3D visualization, voice prompts, and specialized modes for pedestrians and cyclists. ZOOM.CNews.ru Hardware: Explay Infinity II Specifications
The Infinity II was an upgrade over the original Infinity, primarily replacing the single-core processor with a dual-core alternative. mobilmarket.ru Specification Operating System Android 4.0.4 (Ice Cream Sandwich) MediaTek MT6577 4.3-inch Super AMOLED Plus (800 x 480 pixels) 512 MB RAM / 4 GB Internal Storage microSD slot (supports up to 32 GB) 1600 mAh (Removable) Dedicated GPS/A-GPS module Usage & Maintenance
Given these elements, it seems like you might be looking for information on how to link or connect an Explay Infinity II smartphone with an iGO Primo navigation system or software, possibly to use the device as a GPS navigator.
If your goal is to use your Explay Infinity II with iGO Primo for navigation:
Download the file from the 967281004 link. Once downloaded:
Crucial Check: Do not copy a folder named iGO Primo 201 to the SD card. Copy the contents inside that folder. The path on your SD card should be: SD Card\Primo\Primo.exe
If you are trying to get this running on your device, here are the common pitfalls for the Explay Infinity II:
sys.txt is incorrect.iGO Primo 2.0.1 (Build 9.6.7.281004) is a 2013 legacy navigation software version tailored for the Explay Infinity II Android smartphone, featuring full 3D offline maps and wide screen resolution support. While designed for Android 2.2 and higher, this version is primarily found in archived, community-shared repositories. Detailed installation files can be accessed via the iGO Primo Android blog
The iGO Primo 2.0.1 (Build 9.6.7.281004) is a legacy GPS navigation software version specifically optimized for devices like the Explay Infinity II
. Released around 2012, this specific build is tailored to run on the smartphone's Android 4.0.3 (Ice Cream Sandwich) operating system. 🗺️ Core Navigation Features
3D Landmark Visualization: High-quality rendering of complex junctions and famous buildings to make city driving more intuitive.
Smart Routes: Calculates multiple route variants (Fast, Short, Economical, and Easy) based on historic traffic data.
Lane Guidance: Real-time visual indicators showing which lane you should be in for upcoming turns or highway exits.
TTS (Text-to-Speech): Proactive voice guidance that reads out actual street names rather than just "turn left in 100 meters." 📱 Device-Specific Optimization ( Explay Infinity II
The software was frequently bundled or "linked" to this hardware due to its specific hardware profile:
Super AMOLED Display Support: Optimized color profiles to look sharp on the 4.3" Super AMOLED Plus screen.
Dual-Core Performance: Uses the MediaTek MT6577 1GHz processor efficiently, ensuring the map stays fluid even while calculating long-distance routes.
Low RAM Usage: Designed to operate within the device's 512MB RAM without crashing other background services. 🛠️ Technical Utilities iGO Primo 2
MicroSD Loading: Supports installation and map storage on the device's external microSD slot (up to 32GB) to save the limited 4GB internal memory.
Green Routing: A feature that helps you reduce fuel consumption by choosing the most steady-speed path.
Backup & Restore: Includes a utility to back up your favorites and settings via the Naviextras Toolbox.
If you are looking for specific map updates or a download link for this version:
Note that official support for build 9.6.7 has largely been replaced by iGO Nextgen.
Are you trying to recover a lost license for your Explay device?
Do you need help updating the maps to the current 2024/2025 release?
Let me know your goal so I can provide the right technical steps! APP Spotlight - iGo Primo
iGO Primo 2.0.1 (build 9.6.7.281004) is a legacy version of the popular offline navigation software specifically optimized for Android-based devices like the Explay Infinity II
. Released around February 2013, this specific build was designed to provide a comprehensive 3D navigation experience while maintaining low system resource requirements, making it ideal for the hardware specifications of early smartphone and GPS units. Key Features of iGO Primo 2.0.1
Offline Functionality: Unlike many modern apps, this version operates entirely without an internet connection, using pre-loaded map data to guide users.
3D Visualization: Features advanced 3D terrain and landmark rendering to help drivers better orient themselves in complex environments.
Low Storage Footprint: Designed to use significantly less storage space than contemporary competitors, which was crucial for devices with limited internal memory. Multi-Resolution Support
: The .apk for this specific build was developed to support all screen resolutions, ensuring compatibility across various device displays including the 4.3-inch screen of the Explay Infinity II Installation and Updates for Explay Infinity II To use this version of iGO Primo on an Explay Infinity II , users typically follow these steps:
Preparation: Back up the current SD card contents before making any modifications to the navigation software.
Deployment: The software is usually distributed as an APK file. Users insert a MicroSD card into their device and install the application directly onto the card to save internal space.
Configuration: The sys.txt file within the iGO folder often requires manual adjustment to match the specific hardware ports and screen resolution of the Explay device.
Map Updates: Official updates can be managed through the Naviextras Toolbox, which allows users to register their device and download the latest available road data.
While iGO Primo 2.0.1 remains a robust tool for offline navigation, users should note that support for older Android versions (2.2+) and these specific builds is now largely maintained by community enthusiasts rather than official developers.
txt file for specific hardware or how to update maps for this version?
iGO Primo 2.0.1 9.6.7.281004 Explay Infinity II (07 Feb 2013)
7 Feb 2013 — iGO Primo 2.0.1 9.6.7.281004 Explay Infinity II (07 Feb 2013) - All Resolutions apk. Multimediaforum
Map updates for your navigation device and ... - Naviextras.com
Based on the keywords provided, here is the content regarding the GPS navigation setup for your device.
You downloaded the "link," but it doesn't work. Here are the standard fixes for the Explay Infinity II.