Ine Ccnp R S V2 -2015- Hq By Keith Bogart (ORIGINAL - WORKFLOW)

For the uninitiated, Keith Bogart (CCIE #6175) is not a "trainer"—he is a network architect who happened to put a camera in his home office. His teaching style is characterized by:

The 2015 series integrates troubleshooting into every module. Keith has "fault insertion" labs where he shows you a broken configuration, runs a show command, and walks through the logic tree to find the error. This is the single most valuable component for real-world jobs.

  • Legacy Value – The “HQ” Factor
    The “HQ” designation indicates high-quality video and audio, with clear on-screen CLI text and diagram work. Even by today’s standards, the production quality holds up, and the content remains relevant for any network engineer who wants to deeply understand traditional enterprise routing and switching (before the heavy shift toward SD-Access, DNA Center, and automation).

    • Cisco retired the CCNP R&S v2 certification on February 23, 2020. Consequently, INE no longer sells this specific "v2 -2015" bundle on their front page (it has been replaced by the CCNP Enterprise v1.1).

    However, legacy access exists:

    Let's be honest: If you are studying for the current CCNP Enterprise (350-401 ENCOR & 300-410 ENARSI), this specific 2015 v2 course is outdated.

    The 2015 course does not cover:

    However, the 2015 INE course covers the foundational protocols of ENARSI (Advanced Routing) better than almost any modern resource. If you struggle with OSPF LSA types, BGP route reflection, or DMVPN Phase 2, going back to Keith Bogart’s 2015 material is like getting a PhD in those topics before touching the modern automation stuff. INE CCNP R S v2 -2015- HQ By Keith Bogart

    If you are an engineer who wants to understand routing and switching at the CCNP level, and you don't care about the exam code (because you already have your cert or you just want the knowledge), hunt down the INE CCNP R&S v2 -2015- HQ By Keith Bogart.

    It represents the last era of pure "Routing and Switching" before Cisco merged wireless, security, and automation into the core track. Keith Bogart’s delivery is methodical, thorough, and occasionally humorous. He treats you like a colleague, not a student.

    Score: 10/10 for technical depth. 6/10 for current exam relevance (due to age). 10/10 for fundamental understanding.

    For those preparing for the modern CCNP, use Bogart’s 2015 course as your "Protocol Bootcamp," then layer on INE’s new CCNP Enterprise content for the automation and SDN components. You will be a better engineer for it.

    Keywords used: INE CCNP R&S v2 -2015- HQ By Keith Bogart, CCNP Route Switch, Keith Bogart instructor, INE training review, CCNP 300-101, CCNP 300-115, legacy Cisco training.

    It was the summer of 2015, and the heat in the attic was unbearable. Tom, a junior admin at a logistics company, wiped sweat from his forehead. In front of him, two laptops sat open. One displayed a black terminal window scrolling syslog errors. The other played a video from INE’s CCNP R&S v2 series.

    On the screen, the calm, steady voice of Keith Bogart filled the dusty room. For the uninitiated, Keith Bogart (CCIE #6175) is

    “Alright folks,” Keith said, pulling up a topology of three routers. “Let’s talk about the ‘Stuck-in-Active’ state. If you see this, your neighbor is lying to you.”

    Tom laughed nervously. His own lab—three 1841 routers he’d bought on eBay—was currently frozen. Router B was stuck in ACTIVE for prefix 10.10.10.0/24. According to the video, EIGRP had queried all neighbors for a lost route, but someone wasn’t answering.

    Keith leaned into his microphone. “Now, watch what happens when we send a ‘SIA-Query’ manually.”

    Tom followed along, typing the debug commands Keith rattled off. His fingers hovered over the keyboard. SIA-Query sent. SIA-Reply missing.

    Suddenly, his production pager went off. The main warehouse switch had just lost its uplink. But in the lab, the ACTIVE timer kept ticking. For a terrifying 90 seconds, both the real network and his simulated one were broken.

    “Patience,” Keith said in the video, sipping coffee. “Engineering is just applied patience.”

    At the last second, Tom found the misconfiguration: a passive-interface command on a neighbor router that blocked SIA-Replies. He fixed the lab line, and convergence snapped back into place. Then, heart racing, he walked through the production firewall CLI. Same issue. A senior engineer had set a passive interface by mistake last Friday. Legacy Value – The “HQ” Factor The “HQ”

    Tom copied the fix. The warehouse switch came back online.

    He slumped in his chair, staring at Keith Bogart’s frozen face on the paused video. He’d spent five hundred hours with this course. He’d memorized the nuances of EIGRP named mode, the difference between Type 3 and Type 5 LSAs, and the exact weight of a BGP path attribute.

    But he hadn’t learned those things to pass the exam. He learned them for this moment—at 2:00 PM on a Tuesday, sweating in an attic, saving a warehouse because a man in a recording from 2015 had taught him how to listen to a router’s silence.

    Tom unpaused the video. Keith smiled. “Alright, next up: ‘Troubleshooting OSPF Virtual-Links.’ Grab a coffee, this one’s a doozy.”

    Tom grinned and hit Next.

    This 2015 course represents the apex of “classical” Cisco networking training. Produced by INE (one of the “Big Three” vendors of the era, alongside CBT Nuggets and INE’s main rival, Cisco Press), this series is a time capsule. It was released just as Cisco began hinting at the obsolescence of the pure Routing & Switching track (which would later be replaced by Enterprise in 2020). Keith Bogart, a veteran instructor known for his methodical, whiteboard-heavy style, delivers a course that prioritizes protocol mechanics over automation.

    Subject: INE CCNP R&S v2.0 (2015) – Instructor: Keith Bogart Format: High-Quality (HQ) Video Series Era: Pre-Cisco DevNet, Pre-SDN Overthrow