| Feature | Status | Notes | |---------|--------|-------| | XC800 programming | ✅ Verified | Works with UART BSL and DAS. | | XC16x flash erase/write | ✅ Verified | Sector erase reliable even on marginal power. | | TriCore TC2xx/TC3xx read | ⚠️ Limited | Basic flash ops OK, but debug is primitive. | | DAP (Debug Access Port) | ✅ Verified | Works with Infineon DAS and J-Link. | | Hex file merging | ✅ Verified | Can load multiple hex files into different memory regions. | | Checksum calculation | ✅ Verified | User-configurable CRC32 and custom algorithms. |
Even with correct settings, you might get verification failures. Here’s how to resolve them and achieve that "49 verified" status.
| Error Observed | Likely Cause | Fix | |----------------|--------------|-----| | Fail at step 12-18 | Voltage too low during programming | Use external power supply (min 3.3V stable). | | Fail at step 27-30 | Clock jitter on oscillator | Switch to internal RC oscillator or clean external clock. | | Fail at step 41-44 | Bad block in redundancy sector | Run "Repair Bad Blocks" if supported, else replace device. | | Fail immediately on verify | Wrong device selected or protection bits set | Unlock device (Security > Disable Read/Write Protection). |
Connection:
With a J-Link EDU Mini on a TC275 board, Memtool 4.9 connected on the first attempt after selecting "J-Link / DAP" and setting interface speed to 4 MHz. No driver conflicts. infineon memtool 49 verified
Programming Speed:
Memory Manipulation:
The memory viewer allows real-time editing of RAM/peripherals. Verified that changing a PWM compare register while the target runs works immediately – no need to halt core (though caution required).
Feature Name
Sector‑49 Write Verification | Feature | Status | Notes | |---------|--------|-------|
Feature ID
MT‑VER‑49
Description
When the user performs a write or program operation targeting memory sector/block 49, Memtool automatically performs a read‑after‑write verification. The tool compares the data read from the device’s memory at that location against the original buffer.
Outcome
Use Case
Used during flash programming, bootloader testing, or integrity checks in automotive/industrial firmware updates.
Thus:
Feature: "Memtool successfully programmed and verified memory block 49 without errors." Use Case Used during flash programming, bootloader testing,
The phrase "Infineon MEMTOOL 49 verified" is not an official product name. Instead, it emerges from two specific technical contexts:
If you run a programming line or repair shop, achieving 49 verified on every unit is non-negotiable. Implement these professional strategies: