For advanced analysis, use the Script Prompt at the bottom:
T = transmission("transmission"); # Gets the transmission data
f = getdata("transmission", "f"); # Gets frequency
plot(f, T); # Plots transmission vs frequency
The mesh is the single most critical setting affecting speed and accuracy.
loss = getloss("monitor"); ?"Propagation Loss (dB/cm): " + num2str(loss);
The simulation is only stable if the time step ($\Delta t$) relates to the spatial mesh ($\Delta x, \Delta y, \Delta z$) via the Courant-Friedrichs-Lewy (CFL) condition. In 3D: $$ c \Delta t \leq \frac1\sqrt\frac1\Delta x^2 + \frac1\Delta y^2 + \frac1\Delta z^2 $$ Lumerical automatically calculates this limit. If the user forces a mesh smaller than the stability limit without adjusting the time step, the simulation becomes numerically unstable, resulting in diverging field amplitudes.
Once you master the single waveguide, expand your skills:
Lumerical FDTD is the digital twin of the nanophotonics lab. Master the tutorial, master the mesh, and you will master light.
Did you find this tutorial useful? Check specific guides on "Lumerical Multiphysics" or "Lumerical Charge" for photonic-electronic co-simulation.
Ansys Lumerical FDTD is a high-performance, fully vectorial 3D electromagnetic solver designed for modeling nanophotonic components, PICs, and metamaterials by solving Maxwell's equations in the time domain. The standard workflow involves defining materials, creating geometry, setting the simulation region, placing sources and monitors, and conducting post-processing, with support for advanced optimization via Photonic Inverse Design. For more details, visit Ansys Optics Ansys Optics Finite Difference Time Domain (FDTD) solver introduction
A typical FDTD (Finite-Difference Time-Domain) simulation follows a standard lifecycle:
Layout Mode: Define your materials, structures, and solver parameters.
Run Mode: The software discretizes the space into a "Yee mesh" and solves Maxwell's equations over time.
Analysis Mode: Retrieve and process data (like transmission or field profiles) from monitors. 2. Setting Up Your First Simulation lumerical fdtd tutorial
You can find comprehensive introductory courses on the Ansys Innovation Space. Ansys Lumerical FDTD Intro — Lesson 1
Mastering Photonic Design: A Comprehensive Lumerical FDTD Tutorial
Ansys Lumerical FDTD (Finite-Difference Time-Domain) is the industry-standard solver for modeling nanophotonic devices, processes, and materials. Whether you are designing a CMOS image sensor, a grating coupler, or a metalens, understanding the fundamentals of FDTD is crucial for moving from theoretical concepts to manufacturable designs.
This tutorial provides a structured walkthrough for setting up, running, and analyzing your first simulation. 1. Understanding the FDTD Method
Before clicking buttons, it is essential to understand what the software is doing. The FDTD method solves Maxwell’s equations in time and space. It divides the simulation volume into a rectangular grid (the Yee Lattice).
Time-Domain: It calculates the E and H fields at each grid point as time progresses.
Broadband Results: Because it is a time-domain solver, a single simulation can provide response data across a wide range of wavelengths via a Fourier Transform. 2. Setting Up Your Layout
The Lumerical CAD environment follows a logical hierarchy. Follow these steps to build your simulation: A. Define Materials
Navigate to the Material Database. Lumerical provides a vast library of sampled data (e.g., Si, SiO2, Ag).
Pro Tip: Always check the "Material Explorer" to ensure the multi-coefficient model (MCM) fits the experimental data accurately over your source bandwidth. B. Geometry Construction
Use the Structures button to add primitives like rectangles, cylinders, or polygons. For advanced analysis, use the Script Prompt at
Coordinates: Everything is defined relative to the global origin.
Overlap: In Lumerical, the object added later in the objects tree takes precedence if two materials overlap. C. The Simulation Region
Add an FDTD Simulation Region. This is the most critical step. Boundary Conditions:
PML (Perfectly Matched Layer): Absorbs waves without reflection (simulates open space).
Symmetric/Anti-Symmetric: Use these to reduce simulation time by 2x or 4x if your structure and source have symmetry. Periodic: Used for arrays or metasurfaces. 3. Adding Sources and Monitors
To get data, you need to excite the system and record the response. The Source
For most nanophotonic applications, use a Plane Wave or a Total-Field Scattered-Field (TFSF) source. Define the wavelength range (e.g., 400nm to 700nm).
Ensure the source is placed inside the simulation region but outside any monitors you want to use for "scattered" fields.
Monitors do not affect the simulation; they only record data.
Index Monitor: Use this to verify your geometry is correct before running.
Frequency-Domain Field and Power Monitor: This is the "bread and butter" monitor. It calculates Transmission (T) and Reflection (R). The mesh is the single most critical setting
Movie Monitor: Great for visualizing how light pulses propagate through your device. 4. Convergence Testing: The Key to Accuracy
A common mistake for beginners is trusting the first result. You must perform Convergence Testing to ensure your grid is fine enough. Run the simulation with a coarse mesh (Mesh Accuracy 2).
Refine the mesh (Mesh Accuracy 3 or 4) or add a Mesh Override Region over small features.
Compare results. If the transmission spectrum doesn't change significantly, your simulation has converged. 5. Running the Simulation and Analyzing Data
Click the Run button. Lumerical will partition the task across your CPU cores.
Once finished, enter Analysis Mode (the layout will be locked).
Visualizer: Right-click a monitor to "Visualize" results. You can plot Electric Field intensity or the Poynting vector.
Scripting: Use the Lumerical Script File (.lsf) to automate data extraction. For example, transmission("monitor_name"); will return the fraction of power flowing through that monitor. 6. Common Pitfalls to Avoid
PML Reflections: If your PML is too close to a scattering object, it can cause artificial reflections. Leave at least half a wavelength of "buffer" space.
Simulation Time: Ensure the "Simulation Time" in the FDTD region is long enough for the fields to decay. If the "Autoshutoff" level doesn't reach 10-510 to the negative 5 power , your results may show ripples.
Divergence: If the simulation "blows up," check for overlapping materials with high plasma frequencies or narrow mesh override regions. Conclusion
Lumerical FDTD is a powerhouse for photonic research. By mastering the geometry-source-monitor workflow and prioritizing convergence testing, you can produce high-fidelity simulations that match real-world lab results.