Narishige Pc10 Manual New -
| Problem | Likely Cause | Fix | |--------|-------------|-----| | Glass melts but does not pull | Magnet power too low | Increase magnet power | | Glass breaks into pieces | Too much heat or too fast pull | Lower heater current or reduce weight | | Tip too long & floppy | Insufficient heat | Increase heater current or timer | | Pipette bent at tip | Uneven heating | Balance left/right heater currents | | No heating | Blown heater coil | Replace coil (order from Narishige) |
If you’re searching for a new Narishige PC-10 manual, you won’t find it on Narishige’s official site. Instead, check:
| Feature | Narishige PC-10 | Sutter P-97 | HEKA PIP5 | |--------|----------------|-------------|------------| | Pulling cycle | Single gravity | Multi-cycle magnetic pull | Programmable solenoid | | Heating control | Analog dial | Digital PID | Digital | | Memory | None | 100 programs | 10 programs | | Pipette uniformity | Fair | Excellent | Very good | | Learning curve | Low (1 hour) | High (1 week) | Medium | | Price (new) | ~$2,500 | ~$8,500 | ~$6,000 | | Manual clarity | Good (with diagrams) | Dense | Excellent | narishige pc10 manual new
The PC-10 is not for complex patch-clamp configurations (e.g., steep taper for nucleated patches) but works fine for standard whole-cell and sharp electrodes.
The Narishige PC-10 is a classic workhorse, not a modern marvel. The new manual is clear, safety-conscious, and accurate. For the price, nothing else matches its mechanical simplicity. However, in 2026, most electrophysiology labs prefer a used Sutter P-97 over a new PC-10. But if you value repairability, no firmware, and immediate usability, the PC-10 remains a solid choice. | Problem | Likely Cause | Fix |
Rating:
Overall: 7.4/10 – Recommended for teaching & basic patch-clamp; not for advanced research. The Narishige PC-10 is a classic workhorse ,
Subject: Narishige PC-10 Manual: A Comprehensive User Guide and Technical Overview
The Narishige PC-10 is a precision instrument widely recognized in the fields of neuroscience, physiology, and cell biology. It is a micropipette puller designed specifically for the fabrication of glass microelectrodes and injection pipettes. Unlike horizontal pullers that use a heating filament and gravity, the PC-10 utilizes a vertical design with a weight-based gravitational pull mechanism.
This guide serves as a detailed manual supplement for new users or those seeking a refresher on the operation, theory, and maintenance of the Narishige PC-10.
