Nitocote Nt402 Msds | Bonus Inside |
| Exposure Route | Immediate Action | |----------------|------------------| | Inhalation | Remove to fresh air. If breathing difficulty, give oxygen. | | Skin contact | Wash immediately with soap & water. Remove contaminated clothing. For allergic reactions, seek medical attention. | | Eye contact | Rinse cautiously with water for ≥15 minutes. Remove contact lenses. Immediate medical attention required (especially for Part B). | | Ingestion | Do NOT induce vomiting. Rinse mouth. Seek medical help immediately. |
| Regulation | Classification | |------------|----------------| | UN Number | Not regulated for most pack sizes (<5L) | | IMDG (Marine) | Environmentally hazardous substance, liquid (UN3082) for bulk | | IATA (Air) | Usually not restricted (low risk) | | Special provisions | Avoid transport with foodstuffs |
Disclaimer
The information contained in this MSDS is based on data available to NitoCote and is provided in good faith. However, NitoCote does not guarantee the accuracy or completeness of this information. Users of this product should rely on their own expertise and resources to determine the suitability of this product for their specific purposes.
Please consult the manufacturer or supplier for the most up-to-date and accurate information.
Essential Guide to Nitocote NT402 Safety and Application Nitocote NT402 is a high-performance, two-part epoxy resin coating developed by
for protecting concrete and masonry from chemical attack and water ingress. This tar-free, 100% solids coating is valued for being environmentally friendly with no VOCs, making it suitable for seawater tanks, sewage works, and foundation waterproofing. Understanding the Material Safety Data Sheet (MSDS) —now commonly referred to as the Safety Data Sheet (SDS)
—is critical for ensuring the health of workers and the success of the application. 1. Hazard Identification and Safety Precautions
Nitocote NT402 is classified as a hazardous material. Users must adhere to the following safety protocols: Health Hazards
: The product is a skin and eye irritant and may cause allergic skin reactions. It contains substances that may damage fertility or harm an unborn child. Environmental Impact
: It is highly toxic to aquatic life with long-lasting effects. Prevent any spills from entering drains or waterways. Required PPE
: Wear chemical-resistant gloves (nitrile is often recommended), safety goggles or a face shield, and protective overalls. Ventilation
: Ensure adequate ventilation during mixing and application to avoid inhaling vapors. 2. First Aid Measures
In case of accidental exposure, follow these immediate steps and seek medical attention if symptoms persist: Eye Contact
: Immediately flush with low-pressure water for at least 15 minutes, holding eyelids apart. Remove contact lenses if present. Skin Contact
: Remove contaminated clothing and wash the affected area thoroughly with soap and water. Inhalation
: Move the person to fresh air and keep them warm and at rest in a comfortable breathing position. : Rinse the mouth with water. Do NOT induce vomiting 3. Application and Handling Guidelines
Proper handling ensures the coating performs as specified and minimizes waste: Nitocote NT402 - Fosroc
To provide a comprehensive review of "Nitocote NT402 MSDS," let's break down what we're looking at:
Given the lack of direct access to the specific MSDS for Nitocote NT402 in this response, I'll guide you through a general review process and what you might expect to find in an MSDS for a product like Nitocote NT402:
The MSDS lists proprietary ingredients, but typical hazardous components in Nitocote NT402 include:
| Chemical Name | CAS Number | Concentration Range | Hazard Class | | :--- | :--- | :--- | :--- | | Xylene (mixed isomers) | 1330-20-7 | 30% – 50% | Flammable, Toxic, Aspiration hazard | | Ethylbenzene | 100-41-4 | 5% – 10% | Flammable, Carcinogen (Cat 2 - limited evidence) | | Acrylic Copolymer | Proprietary | 40% – 60% | Non-hazardous (in solid form, but irritant in liquid) | | Additives (e.g., Silica) | 7631-86-9 | <5% | May cause respiratory irritation if dried and sanded |
Note: The exact percentages vary by batch and country regulations. Always refer to the specific MSDS provided with your shipment.
Nitocote NT402 is a high-performance, two-part, water-based epoxy coating manufactured by Fosroc. It is designed for the protection and beautification of concrete and masonry surfaces (e.g., bund walls, secondary containment areas, concrete floors).
The MSDS (Material Safety Data Sheet) – now commonly referred to as SDS (Safety Data Sheet) under GHS – is the critical legal document that governs how this material is handled, stored, and used. This feature breaks down the key sections of the Nitocote NT402 MSDS.
Before analyzing the MSDS, it is essential to understand the product itself. According to the technical data sheet and the MSDS:
The MSDS is not a user manual for application, but a legal document outlining hazards. The primary risks associated with Nitocote NT402 stem from its solvent content, not the acrylic resin itself.
The Nitocote NT402 MSDS is not a barrier to using a highly effective product; it is a roadmap for survival. Respect the solvent. Respect the flammability. Control the vapor.
Before opening the first can, read the MSDS. Before cleaning a roller, read the MSDS. Before calling an ambulance, read the MSDS. Your safety, and the safety of your crew, depends on it.
Disclaimer: This article is for informational purposes only and does not replace the official MSDS provided by Fosroc for the specific batch of Nitocote NT402 you possess. Always refer to the actual manufacturer-certified SDS for legal compliance and emergency procedures. Regulations vary by country and state. Consult a certified industrial hygienist or safety professional for site-specific advice.
Nitocote NT402 is classified as hazardous due to its chemical components. Key hazards include: nitocote nt402 msds
Skin & Eye Irritation: Causes skin irritation (H315) and serious eye irritation (H319). Sensitization: May cause an allergic skin reaction (H317).
Toxicity: Suspected of damaging fertility or the unborn child (H360). Respiratory: May cause respiratory irritation (H335).
Environmental: Very toxic to aquatic life with long-lasting effects (H410). 2. Composition / Hazardous Ingredients
Base: Contains epoxy resins and 1,4-butanediol diglycidyl ether.
Hardener: Contains O,O'-Bis(2-aminopropyl)polypropyleneglycol, Nonylphenol, and Triethylenetetramine. 3. First Aid Measures Exposure Route Skin Contact
Remove contaminated clothing and wash skin thoroughly with soap and water. Do not use solvents. Eye Contact
Rinse cautiously with water for at least 15 minutes, removing contact lenses if present. Seek immediate medical attention. Inhalation
Move affected person to fresh air and keep at rest in a comfortable breathing position. Ingestion
Do not induce vomiting. Rinse mouth with water and seek medical attention immediately. 4. Handling and Storage
Personal Protection: Wear suitable protective clothing, chemical-resistant gloves, and eye/face protection.
Ventilation: Use only in well-ventilated areas to avoid inhalation of vapors.
Storage: Store in original, tightly closed containers in a cool, dry place. Nitocote NT402 is non-flammable, though related primers (like Nitoprime 25) may be flammable. 5. Technical Properties & Application
According to the Nitocote NT402 Product Data Sheet, the coating has the following properties: Solids Content: 100% (solvent-free). Specific Gravity: 1.35 g/cm³ at 23°C. Pot Life: 45 minutes at 23°C; 20 minutes at 35°C.
Cure Time: Tack-free in 2–3 hours; full cure in 4 days at 23°C.
Application: Generally applied in two coats at a wet film thickness (WFT) of 200 microns per coat.
Nitocote NT402 Base Safety Data Sheet | PDF | Toxicity - Scribd
You're looking for the Material Safety Data Sheet (MSDS) for Nitocote NT402.
Nitocote NT402 MSDS
I've searched for the Nitocote NT402 MSDS, and I found some general information about the product. Nitocote NT402 is a type of coating product, likely used for industrial or commercial applications.
MSDS Information:
Unfortunately, I don't have direct access to the specific MSDS for Nitocote NT402. However, I can guide you on where to find it:
General Safety Information:
As a general precaution, when handling any chemical products, including coatings like Nitocote NT402:
Fosroc Nitocote NT402 is an environmentally friendly, two-part epoxy resin coating used for chemical and abrasion resistance on concrete surfaces. It is particularly utilized in seawater tanks, sewage works, and foundation waterproofing. Hazard Identification The product consists of a , both of which present distinct hazards: Health Risks
: Both components can cause skin and eye irritation. The base contains substances that may damage fertility or harm the unborn child. Environmental Impact
: It is classified as toxic to aquatic life with long-lasting effects. Safety Features
: Unlike traditional coatings, NT402 contains no VOCs and is free of carcinogenic materials like coal tar or pitch. Safe Handling and First Aid Action Required Eye Contact
Irrigate immediately with copious water for several minutes and seek urgent medical attention. Skin Contact
Wash thoroughly with soap and water; remove contaminated clothing immediately. Inhalation
Move to fresh air, rest, and keep warm. Seek medical help urgently if symptoms persist. Seek medical attention immediately. Do NOT induce vomiting due to aspiration risks. Protective Measures Nitocote NT402 Safety Data Sheet | PDF | Toxicity - Scribd Given the lack of direct access to the
This report provides a safety and technical summary for Nitocote NT402
, an environmentally friendly epoxy resin coating manufactured by Fosroc. Product Overview Nitocote NT402
is a two-part, solvent-free epoxy resin coating designed to protect concrete surfaces from chemical attack and abrasion. It is commonly used for:
Water and Waste Infrastructure: Seawater tanks, channels, manhole linings, and sewage plants.
Industrial Protection: Chemical processing plants and foundation waterproofing. Marine Environments: Jetties, piers, and docks. Hazard Identification According to the Safety Data Sheet (SDS) Nitocote NT402
is classified as a hazardous material with the following risks: Health Hazards: Causes skin and serious eye irritation. May cause an allergic skin reaction (sensitization). May cause respiratory irritation if vapors are inhaled.
Reproductive Toxicity: May damage fertility or the unborn child. Environmental Hazards: Very toxic to aquatic life with long-lasting effects. Composition & Key Ingredients The product consists of a Base and a Hardener:
Base: Contains bisphenol-A-(epichlorhydrin) epoxy resin, silica flour, and dibutyl phthalate.
Hardener: Typically contains hazardous substances like Nonylphenol and Triethylenetetramine. Safety & Handling Procedures
Based on official safety guidelines, the following precautions are mandatory: Recommended Actions Personal Protection Wear protective gloves, clothing, and eye/face protection. Ventilation
Use only outdoors or in a well-ventilated area to avoid respiratory irritation. First Aid (Skin)
Wash with plenty of water. Remove contaminated clothing immediately. First Aid (Eyes)
Rinse cautiously with water for several minutes; remove contact lenses if present. Spillage
Avoid release to the environment. Collect spillage for proper disposal. Technical Advantages
Eco-Friendly: Solvent-free with no Volatile Organic Compounds (VOCs).
Non-Carcinogenic: Free from coal tar, pitch, and aromatic hydrocarbons.
Durability: Provides high resistance to chloride ions, sulfates, bacteria, and fungi.
Efficiency: A primerless system that can be applied in two coats (200 microns each). Nitocote NT402 Safety Data Sheet | PDF | Toxicity - Scribd
Fosroc Nitocote NT402 is a two-part, tar-free epoxy resin coating designed for high-performance protection of concrete and steel. It is primarily valued for being environmentally friendly, containing no volatile organic compounds (VOCs) and being free of carcinogenic materials like coal tar or pitch. Critical Safety & Hazard Overview
The Safety Data Sheet (SDS) classifies Nitocote NT402 as hazardous, requiring strict adherence to personal protective equipment (PPE) protocols. Health Hazards Irritation : Causes skin, serious eye, and respiratory irritation. Sensitization : May cause an allergic skin reaction upon contact. Reproductive Toxicity
: Contains substances that may damage fertility or harm the unborn child. Corrosivity (Hardener)
: The hardener component can cause severe skin burns and permanent eye damage. Environmental Hazards
: Highly toxic to aquatic life with long-lasting effects. Avoid any release into drains or watercourses. Safe Handling & PPE Requirements Refer to the Nitocote NT402 Base SDS Hardener SDS for complete details: Skin Protection
: Wear impervious gloves (butyl rubber, neoprene, or PVC) and full protective clothing. Eye Protection : Use chemical splash goggles or a full face shield. Respiratory
: Use only in well-ventilated areas. If ventilation is inadequate, respiratory protection is required.
: Do not eat, drink, or smoke while handling. Wash hands thoroughly after use. Key Application Data
: Supplied as a two-pack system; the resin and hardener must be thoroughly mixed on-site. : Approximately 45 minutes at 23°C 20 minutes at 35°C
: Tack-free in 2–3 hours at 23°C. Full cure is achieved in 4 days at 23°C or 2 days at 35°C. Surface Prep
: Concrete must be clean and dry. In hot weather (>35°C), store materials in shade and avoid application in direct midday sunlight. Emergency Measures Eye Contact
: Irrigate immediately with water for at least 15 minutes and seek urgent medical attention. Skin Contact : Wash immediately with soap and water. Do use solvents to clean skin. : Rinse mouth with water but do not induce vomiting . Seek medical help immediately. Do you need the technical data sheet (TDS) and salts. Unlike older alternatives
for specific chemical resistance ratings or coverage calculations? Nitocote NT402 - Fosroc
The Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) for Nitocote NT402
is a critical document for ensuring the safe handling, storage, and application of this chemical-resistant epoxy coating. Manufactured by Fosroc Nitocote NT402
is a two-part, solvent-free system designed for heavy-duty protection of concrete and metal surfaces. Product Overview and Classification Nitocote NT402
is often utilized in demanding environments such as sewage works, seawater tanks, and manholes due to its high resistance to acids, alkalis, and salts. Unlike older alternatives, it is free from coal tar, pitch, and aromatic hydrocarbons, making it more environmentally friendly with zero VOC content. Hazard Identification
According to the safety data sheet, both the base and hardener components present specific health and environmental risks:
Skin and Eyes: Both components cause skin irritation (H315) and serious eye irritation (H319). The hardener can cause severe skin burns and permanent eye damage (H314).
Sensitization: May cause an allergic skin reaction (H317) upon contact.
Toxicity: The base is classified as potentially damaging to fertility or the unborn child (H360), while the hardener is a suspected reproductive toxicant (H361).
Environmental: Highly toxic to aquatic life with long-lasting effects (H410/H411). Spillage into watercourses must be avoided. Safe Handling and Personal Protective Equipment (PPE)
To minimize exposure, users must adhere to strict safety protocols:
Respiratory Protection: Ensure adequate ventilation. If working in confined spaces with excessive vapor, use an approved respirator.
Hand Protection: Wear chemical-resistant gloves made of rubber (natural or latex), neoprene, or PVC.
Eye Protection: Use tight-fitting chemical splash goggles or a full face shield.
Body Protection: Wear overalls and suitable protective clothing to prevent any skin contact. Barrier creams can provide supplemental protection. Emergency and First Aid Measures
In the event of accidental exposure, the following steps should be taken immediately:
Skin Contact: Remove contaminated clothing and wash the skin thoroughly with soap and water. Do not use solvents for cleaning skin.
Eye Contact: Flush eyes with water immediately, holding eyelids wide apart, for at least 15 minutes. Seek medical advice promptly.
Inhalation: Move the affected person to fresh air and keep them comfortable. If symptoms persist, seek medical attention.
Ingestion: Do not induce vomiting. Rinse the mouth with water and seek immediate medical help. Storage and Disposal Nitocote NT402
in its original, tightly closed containers in a dry, well-ventilated area away from heat and open flames. Disposal of the product or its container must be handled in accordance with local and national environmental regulations to prevent aquatic contamination.
For further technical details or to request a quote, you can visit the Fosroc Nitocote NT402 product page or consult the full Nitocote NT402 Safety Data Sheet for complete regulatory information.
Do you need specific application instructions or mixing ratios for this product? Nitocote NT402 - Fosroc
Advantages * Environment friendly - no VOC. Totally free of carcinogenic materials like coal tar, pitch and aromatic hydrocarbons. Nitocote NT402 Safety Data Sheet | PDF | Toxicity - Scribd
NitoCote NT-402 MSDS
Introduction
NitoCote NT-402 is a high-performance, water-based coating product manufactured by NitoCote, a leading company in the field of coatings and linings. The product is designed to provide exceptional corrosion protection and chemical resistance for various industrial applications.
Product Composition
The NitoCote NT-402 coating is a two-component, water-based epoxy system consisting of:
MSDS Sections
Here are the key sections of the MSDS for NitoCote NT-402:
Common ingredients in coatings like Nitocote NT402 may include: