We will use the Nokia Best USB Phone Manager (NBB) tool, which is free, reliable, and beginner-friendly.
This flash file is compatible only with the Nokia 105 TA-1304 model. Attempting to flash this firmware on a different model (such as TA-1010, TA-1034, or older RM variants) may permanently brick your device. Please verify your phone's model by checking the sticker under the battery or checking the IMEI before proceeding.
A: No. The hardware is not designed for Android. Attempting to flash an Android ROM will permanently brick the device.
Some flashing tools are flagged as false positives. Disable real-time protection during the process.
That’s it! You have successfully flashed your Nokia 105 TA-1304. Your phone should now be as fresh as out of the box.
If you found this guide helpful, please share it with others who might need it. For any issues, leave a comment below.
Disclaimer: This guide is for educational purposes. The blog author is not responsible for any hardware damage. Always ensure you are using the correct firmware for your exact model (TA-1304).
The Nokia 105 (TA-1304), often referred to as the Nokia 105 4G, typically requires a specific stock firmware (Flash File) to resolve issues like boot loops, contact service errors, or to reset a forgotten security code. Essential Requirements
To flash this device, you generally need the following components: Nokia 105 Ta 1304 Flash File Download
Flash File: A PAC file (Spreadtrum/Unisoc chipset based) specific to the TA-1304 model.
Flash Tool: The SPD Upgrade Tool (also known as Research Download Tool) is the primary software used for this chipset.
USB Drivers: Latest SPD (Spreadtrum) USB Drivers must be installed on your Windows PC to ensure the device is recognized.
Hardware: A compatible Micro-USB cable and a PC running Windows 7 or above. General Flashing Steps
Backup Data: Flashing will erase all user data, including contacts and messages.
Install Drivers: Ensure the SPD USB Drivers are correctly installed via the Device Manager.
Load Firmware: Open the SPD Upgrade Tool, click the Gear (Load Packet) icon, and select the downloaded .pac firmware file. Connect Device: Turn off the phone.
Hold the Boot Key (usually the center OK button or the 'UP' navigation key). Connect the phone to the PC while holding the key. We will use the Nokia Best USB Phone
Start Process: Click the Start (Play) button in the tool. The progress bar will turn green once the process is complete (labeled as "Passed"). Recovery Alternatives
Hard Reset: If you can access the home screen but want to wipe data, use the dial code *#7370#.
Default Security Code: The factory default code for Nokia devices is 12345.
If you tell me the specific error or reason you need to flash the phone (e.g., forgotten password, "Contact Service" message, or dead on logo), I can provide more targeted troubleshooting steps.
The Nokia 105 (TA-1304) is a 2019 fourth-edition feature phone that utilizes the Series 30+ operating system. It is built with a Spreadtrum (SPD) chipset, which dictates the specific tools and drivers needed for flashing or removing security codes. Essential Files and Tools
To perform a flash on this device, you typically need three components:
Flash File (Firmware): The specific software build for TA-1304 (often sought to fix boot loops or remove forgotten passwords).
SPD Flash Tool: Since the device uses a Spreadtrum CPU, tools like SPD Upgrade Tool or professional service dongles like UMT (Ultimate Multi Tool) are required. A: No
USB Drivers: Standard Spreadtrum/SPD USB drivers are necessary for the computer to recognize the device in "Flash Mode". Flashing Procedure Summary
Preparation: Charge the battery to at least 60% to prevent interruption during the process.
Driver Installation: Install the SPD drivers on a Windows PC (Windows 7 or higher).
Tool Setup: Open your chosen flashing software and load the specific TA-1304 firmware file.
Connection: Power off the phone. Hold the boot key (usually the center OK button or #) and connect it to the PC via USB.
Execution: Once the tool detects the SPD port, click "Download" or "Flash" to start the process. Common Troubleshooting Codes
If you only need to reset the device without a full flash, you can use these built-in codes: Download SP Flash Tool for Nokia phones
Before downloading any file, you must confirm your phone’s exact model number. Using the wrong flash file can permanently damage your device.
How to check:
If it says TA-1304, you have the correct variant. The Nokia 105 also comes in TA-1010, TA-1174, and TA-1209 versions—files for these are not compatible with the TA-1304.