After installing, run these simple tests:
| Problem | Solution | |---------|----------| | Error “Driver not signed” | Disable driver signature enforcement or use Windows 7 compatibility mode. | | Phone not detected | Try different USB port (USB 2.0 preferred). | | Driver conflict with PC Suite | Uninstall older Nokia PC Suite completely first. | | Only charges, no data mode | Check USB cable – use a data cable (not charge-only). |
Why should anyone care about a driver for a phone that costs less than a dinner for two?
The Nokia 130 RM-1035 uses an old MediaTek (MT6260) chipset. The official Nokia driver is stable, lightweight, and has no third-party "improved" version. Any website claiming a "faster" or "better" driver is likely malware. Stick with the official Nokia Connectivity Cable Driver.
To get the best performance from your Nokia 130 (RM-1035) Go to product viewer dialog for this item. when connecting to a PC, you generally need the Nokia Connectivity Cable Driver
. This driver allows your computer to recognize the phone for data transfer, use as a modem, or for advanced tasks like flashing firmware. Key Driver Options Nokia Connectivity Cable Driver (Standard): nokia 130 rm1035 usb driver better
The most stable version for general use (data transfer or charging) is typically version Nokia MTK USB Serial Port Driver: Because the
uses a MediaTek (MTK) chipset, you may specifically need MTK-specific drivers if you are using tools like Miracle Box SP Flash Tool to repair or update the device. Nokia Care / OST LA Drivers:
These are often included with official Nokia service tools and are highly reliable for resolving "unknown device" errors in Device Manager. Installation Steps for Windows 10 & 11
Modern Windows versions often require a specific process due to "Driver Signature Enforcement": Preparation:
Uninstall any older Nokia or DKU-2 drivers from your Control Panel first to avoid conflicts. Disable Signature Enforcement: After installing, run these simple tests: | Problem
For MTK-specific flashing drivers, you may need to restart your PC into Advanced Startup
mode and select option 7 ("Disable driver signature enforcement"). Manual Installation: Connect your to the PC via a micro-USB cable. Device Manager
Right-click the "Unknown Device" (often listed under Ports or Other Devices), select Update Driver
, and browse to the folder where you downloaded the drivers. Verification: A successful installation will show your device as a "Nokia USB Phone Parent" or a specific "COM Port" without any yellow exclamation marks. Recommended Tools
Nokia MTK Drivers Windows 10 64Bit Installation Guide #nokia 7 Oct 2017 — Why should anyone care about a driver for
The RM-1035 is often revived using tools like Infinity Best, ATF Box, or Phoenix Service Software. The better driver must create a stable COM port (e.g., Nokia USB Flashing Generic) without dropouts.
Here’s a comparison of the most common drivers for Nokia 130 RM-1035:
| Driver Name | Windows 11 Support | Flashing Stability | Signature Required | Better Rating | |-------------|--------------------|--------------------|---------------------|----------------| | Original Nokia PC Suite Driver | No (fails after 2019) | Poor | Yes | ⭐ | | Nokia Connectivity Cable 7.1 | Partial (needs patching) | Medium | No | ⭐⭐⭐ | | Infinity BB5 Driver (modified) | Yes | High | Yes (test mode) | ⭐⭐⭐⭐ | | Nokia Best 2.0 Integrated Driver | Yes | Very High | No (works on normal boot) | ⭐⭐⭐⭐⭐ (Best) |
A common mistake among users is attempting to install the legacy Nokia PC Suite. This is a fatal error for the RM-1035. The 130 runs on a different operating system core (Series 30+) than the older Symbian devices PC Suite was built for.
The "Better" approach to driver installation involves three methods, ranked by effectiveness:
Method B: Device Manager Manual Install (The Technician’s Approach):
Method C: The "Nokia Connectivity Cable Driver" (The Legacy Fix):