Onkyo Rc-799m Remote Manual

This is the RC-799M’s superpower. You can “teach” it commands from any IR remote (even a dead brand).

Pro Tip: To clear a learned button, repeat steps 1-3, then press the Device Mode button twice instead of sending a signal.

Open the back. If you see white or green crusty residue, clean it with a q-tip dipped in white vinegar, then dry it thoroughly. Insert 4 new AAA batteries. The red LED at the top should flash once.

Note: This feature profile is a summary based on the standard functionality of the Onkyo RC-799M remote controller. For specific code lists for your specific devices, please refer to the physical manual included with the product.

The Onkyo RC-799M is a robust, well-organized remote for its era. Its learning ability and backlit keys make it superior to many basic OEM remotes. While newer HDMI-CEC or smartphone apps have overtaken it for convenience, the RC-799M remains a perfectly capable controller for any vintage Onkyo home theater setup.

Pro tip: If you no longer have the original manual, Onkyo’s website hosts PDF versions for most receivers bundled with this remote. Search for your receiver model’s manual – the remote section will include full code lists and advanced macro programming steps.

Onkyo RC-799M Remote Manual The Onkyo RC-799M is a standard infrared (IR) remote used with various Onkyo AV receivers. While it often works immediately after inserting batteries, you can also program it to control other devices like TVs or DVD players. 🎮 Programming for Other Devices

To control a TV or other component, follow these steps to assign a 5-digit remote control code:

Enter Setup Mode: Press and hold the REMOTE MODE button (e.g., TV, BD/DVD) while also holding the DISPLAY button for about 3 seconds. The Remote indicator/mode button should light up. onkyo rc-799m remote manual

Input the Code: Within 30 seconds, use the number buttons to enter the 5-digit code for your device brand.

Confirm: If the code is accepted, the REMOTE MODE button will flash twice.

Test: Aim the remote at your device and press the Power button to see if it responds.

💡 Note: Codes cannot be assigned to the RECEIVER or ZONE 2 buttons. ⚙️ Key Button Functions

RECEIVER: Switches the remote to control the main Onkyo receiver functions.

REMOTE MODE: Selects which device you are currently controlling (TV, DVD, CD, etc.).

INPUT SELECTOR: Changes the audio/video source on the receiver.

HOME / SETUP: Accesses the on-screen menu for receiver settings. This is the RC-799M’s superpower

TONE: Press repeatedly to toggle between "Bass" and "Treble," then use the dial or arrow keys to adjust sound quality.

DISPLAY: Shows current input/output information on the receiver's front panel or TV screen. 🛠️ Troubleshooting & Reset

Not Working?: Ensure you are using 2 AAA batteries. Most replacement versions of this remote do not require programming for the Onkyo receiver itself; they work "out of the box."

Resetting: On many Onkyo models, you can reset the remote by holding RECEIVER and HOME simultaneously until the indicator light stays on.

Direct Support: You can find official PDF manuals for the receivers this remote ships with (like the HT-RC330 or TX-SR309) on the Onkyo Product Support Page. AI responses may include mistakes. Learn more

The Onkyo RC-799M Go to product viewer dialog for this item.

is a dedicated infrared remote control typically used with Onkyo AV receivers like the HT-R391, HT-RC330, and TX-SR313 . Key Usage Instructions

Plug-and-Play: For most compatible Onkyo receivers, this remote requires no programming . Once you insert two AA alkaline batteries, it should operate the receiver immediately . Pro Tip: To clear a learned button, repeat

Operating Range: Ensure you are within roughly 10 meters (33 feet) of the receiver and pointing the remote directly at the receiver's IR sensor Device Limitations: Standard versions of the

and most third-party replacements cannot be programmed to control other devices like your TV, DVD player, or cable box . Programming (If Supported)

While many versions are non-programmable, some users have reported success with the following standard Onkyo programming sequence to control basic TV functions :

Locate the 5-digit code for your TV brand (e.g., 10818 for Sharp).

Press and hold the [REMOTE MODE] button (like TV) and [DISPLAY] simultaneously for about 3 seconds until the button stays lit.

Enter the 5-digit code using the number keys within 30 seconds. If the code is accepted, the button will flash twice.

This is the most searched section of the Onkyo RC-799M remote manual. There are three ways to program this remote: Direct Code Entry, Auto Search (Code Scan), and Learning Mode.

The Onkyo RC-799M is a multifunction remote control designed primarily for Onkyo audio/video receivers and home-theater components. This handbook covers setup, button descriptions, basic and advanced operations, troubleshooting, maintenance, and tips for customizing and maximizing your experience.