Panasonic Fz1000 Ii Firmware Update

As Panasonic transitioned from the old “Panasonic Image App” to the new “Lumix Sync” app, this update bridged the gap.

Verdict: Essential for anyone using their smartphone for remote control or image transfer.

Step 1: Download the file

Step 2: Format the SD Card

Step 3: Transfer the file

Step 4: Initiate the update

Step 5: Wait

Step 6: Verify

If you bought a used FZ1000 II in 2024 or 2025, there is a 50/50 chance it is still on Ver 1.0. Yes, you should upgrade.

However, a note of caution: If your camera is currently running Ver 1.1 and you are only using it for studio tethered shooting (via HDMI capture) and never use OIS, the update offers little benefit. For 99% of users, Ver 1.2 is essential. panasonic fz1000 ii firmware update

Do NOT upgrade if:

After any firmware update, go to [Setup] → [Reset] (but not necessary for minor updates like v1.2).
If you notice weird behavior post-update, reset to default and reconfigure.

  • The camera will display: “Update Firmware?”
  • Select “Yes” using the cursor buttons.
  • Press Set. The update will begin. You will see a progress bar (takes about 2-3 minutes).
  • Do not turn off the camera or open the battery door. Doing so can brick the camera.
  • When complete, the screen says “Update Completed. Turn off camera.”
  • Turn the camera off. Remove the SD card.
  • Turn the camera back on normally, re-check the version (Menu → Version Display). It should now read VER 2.1.

    • Having installed Ver. 1.2 on the FZ1000 II, here is the real-world difference users and testers have found. As Panasonic transitioned from the old “Panasonic Image

    The AF did not become faster (the hardware limits the 2019 processor), but it became stickier. Animal Eye AF in video mode is slightly more reliable. However, don't expect S5II phase-detect levels of performance.