Phison Ps225107ps2307 Mptool 【Confirmed - PICK】

Use USBDevTool (GetInfo) – a companion tool. It reads the controller’s internal ID.

Warning: If GetInfo shows "No Supported MP Version," your drive uses newer firmware locked to a specific tool. Trying random MPTool versions will corrupt it.

If after pin-shorting, MPTool reports "Flash ID mismatch" or "Invalid DL07 Code" – your NAND is dead or the chip is a relabeled PS2251-09. Some cheap drives use fake PS2307 markings. In that case, recycle the drive – no tool can save it.

Final interesting note: Many Silicon Power, Patriot, and PNY USB 3.0 drives from 2017-2020 use PS2307 internally. They are excellent learning tools – you can recover, convert, or repurpose them without expensive hardware. Just keep a shorting tool ready.

When a USB drive with a Phison PS2251-07 (PS2307) controller becomes "read-only," "unrecognized," or shows "no media," it often indicates a firmware "panic" mode where the controller cannot access the NAND memory. HDD GURU FORUMS Essential Tools for PS2251-07/PS2307

The most effective way to repair these drives is using professional-grade Mass Production (MP) tools designed for Phison controllers. Phison MPALL (v5.13.0C or later):

The primary utility for updating firmware and re-initializing the controller.

Often used as an alternative if MPALL fails, though it may have compatibility issues with certain memory types like Hynix TLC. GetInfo.exe:

Found within MPALL packages, this tool is critical for identifying your specific firmware version and NAND type before you attempt a flash. ChipGenius:

A generic utility used to confirm your controller is indeed a PS2251-07 if the drive is not recognized by other tools. Standard Repair Procedure

Flashing firmware is risky and can permanently brick the drive. Only proceed if the data is already lost or backed up. Identification: ChipGenius to record your controller (PS2251-07) and Flash ID. Preparation: Download the Phison MPALL phison ps225107ps2307 mptool

package. If your drive is in "panic mode" (identifying as "2307 PRAM"), try connecting it to a USB 2.0 port

, as USB 3.0 ports often fail to communicate correctly during the recovery process. Configuration: MPParamEdit_F1.exe within the MPALL folder to create a configuration file ( ). You must manually select as the controller type. MPALL_F1_7F.exe , load your configuration, and click

If the program closes automatically or disconnects, it may be due to incorrect configuration settings or incompatible firmware files. HDD GURU FORUMS Troubleshooting Common Errors Write Protected:

Often fixed by a simple re-initialization in MPALL without a full firmware "burn". 2307 PRAM Mode:

This status means the controller is waiting for firmware. You will need a specific "Burner" file ( ) and "Firmware" file ( ) that matches your NAND type. Device Not Found: Ensure you are running the tools as Administrator and try multiple USB ports. For specialized resources and verified firmware files, the HDD GURU Forums

are the primary community hub for Phison controller recovery. for your drive's memory chip? View topic - I have a problem with my generic Phison USB.

Technical Overview of Phison PS2251-07 (PS2307) MPTool The Phison PS2251-07 (also known as PS2307) is a high-performance USB 3.0 controller commonly used in mass-market flash drives from brands like Kingston, Toshiba, and Apacer. When these drives experience firmware corruption—manifesting as "Write Protected," "No Media," or "Unknown Device" errors—the Phison MPTool (Mass Production Tool) is the primary software used for low-level recovery and reconfiguration. 🛠️ Recovery Software Suite

To service a PS2251-07 controller, different utilities are used depending on the severity of the corruption:

Phison MPALL (Multi-Port ALL-in-one): The standard factory tool for flashing firmware and setting drive parameters.

Phison UPTool: A "Sorting" tool designed for drives with high bad-block counts or lower-quality NAND flash. It is often more successful but significantly slower than MPALL. Use USBDevTool (GetInfo) – a companion tool

Phison ST-TOOL: A specialized variant of MPALL that includes enhanced sorting capabilities for specific chip revisions.

ChipGenius: An essential third-party diagnostic tool used to confirm the controller (PS2251-07) and the NAND Flash ID (FID) before starting. 📂 Required Firmware Components

Flashing a PS2251-07 requires two specific binary files that must match the controller and the NAND type:

Burner File (BN07.BIN):* Initializes the controller and prepares it to receive the firmware.

Firmware File (FW07.BIN):* The actual operating system of the USB drive.

Note: Using an incorrect version (e.g., trying to flash a TLC firmware onto MLC memory) can permanently "brick" the device. 🚀 Step-by-Step Restoration Process 1. Pre-Configuration

Connect the USB drive to a USB 2.0 port for better stability during flashing. Run MPALL_F1_*.exe as an Administrator. Click Update to ensure the tool detects the controller. 2. Parameter Setup Open Setting (or click MPParamEdit_F1.exe). Select New Setting and click OK. Controller: Select PS2251-07. Host Port: Select USB 2.0/3.0.

Flash Setting: Check "Auto Detect" or manually enter the Flash ID if known. Firmware Path: Point to your specific BN07 and FW07 files. 3. Execution Save the configuration and return to the main MPALL screen. Click Start.

Crucial: Do not disconnect the drive or run other programs until the progress bar turns green (Success). ⚠️ Critical Troubleshooting & "Test Mode"

If the drive is not detected or throws a "CT-is Toggle Flash" or "0x1102" error, the controller may be "frozen" in a panic state. Warning: If GetInfo shows "No Supported MP Version,"

Test Mode Procedure: You must physically short the data pins (usually pins 29-30 or 30-31) on the NAND flash chip with a needle while plugging it in.

Speed Issues: If the drive works but is extremely slow after repair, you likely used an outdated firmware version or a "Sorting" tool like UPTool, which prioritizes stability over speed.

To help you find the correct firmware, what is the Flash ID or NAND type shown for your drive in ChipGenius? Phison PS2251-07 (PS2307) Firmware [BN07*.BIN, FW07*.BIN]

The cursor blinks in the top left corner of a stark, DOS-style interface. The font is blocky, the background is a harsh blue, and the buttons are labeled with cryptic abbreviations like "Burner" and "MP." This is the Phison PS2251-07 (PS2307) MPTool, and for a specific breed of digital tinkerer, it is the entrance to a hidden subterranean world of flash memory.

To the uninitiated, a USB flash drive is a simple object: a plastic casing, a metal connector, and a static amount of storage. But to those who know about the Phison PS2307 controller, that humble stick is a sleeping giant waiting to be reprogrammed.

If you have landed on this page, you are likely staring at a USB flash drive that has suddenly dropped from 64GB to just 8MB, is not recognized by Windows, or shows a "0 bytes" capacity. Alternatively, you may have a counterfeit drive that reports a fake capacity. In the world of flash drive repair, two model numbers cause frequent confusion: Phison PS2251-07 and Phison PS2307.

These are not two different chips. In fact, they are two names for the same controller family. The PS2307 is simply the marketing name for the USB 3.0 version of the PS2251-07 (also known as PS2251-07 or 2251-07-7) .

The tool required to fix, flash, or low-level format these drives is called the MPTOOL (Mass Production Tool). This article is a deep dive into finding, configuring, and safely using the Phison PS2251-07/PS2307 MPTOOL to revive your dead drive.

If MP Tool fails mid-process and drive is unresponsive:

Before downloading any software, you must positively identify your controller. Using the wrong MPTOOL (e.g., a tool for the PS2251-03 or PS2251-09) will brick your drive permanently.