Pzem-017 Software Download

The software won’t recognize your meter without the correct COM port driver.

After installing, plug in your adapter. Open Device Manager (Windows) → Ports (COM & LPT). Note the COM port number (e.g., COM5).

If you use Home Assistant, the PZEM-017 integrates perfectly via ESPHome. You flash an ESP8266 or ESP32 with custom firmware that reads the meter over TTL and pushes data to MQTT or Home Assistant’s API. pzem-017 software download

Best for: Home automation, solar monitoring, Grafana dashboards.

If you use multiple PZEM-017 meters on one bus: The software won’t recognize your meter without the

The PZEM-017 is a popular DC multifunction energy meter, widely used in solar power systems, RVs, battery monitoring, and industrial equipment. It measures voltage, current, power, and energy consumption with impressive accuracy. However, unlike its smaller siblings (PZEM-021 or PZEM-011), the PZEM-017 relies heavily on external software to configure its shunt type, calibrate readings, and read historical data.

If you’ve searched for the term “pzem-017 software download”, you’ve likely realized that official sources are scattered, and many websites offer outdated or even dangerous files. This article provides a secure, step-by-step guide to finding, downloading, and using the correct software for your PZEM-017. After installing, plug in your adapter

The most critical step. In the software, find “Shunt Setting” or “Range Setting”.

Without this, a 200A shunt may report 300A incorrectly.

Note: Some PZEM-017 units use Modbus-RTU over RS485 (check device label). If your module has RS485, you need an RS485-to-USB converter instead of TTL.

After installation, check COM port in Device Manager (Windows) or ls /dev/ttyUSB* (Linux).