9. Four-player chess variants
Chess variants for four players. They play in two teams: Yellow and Red play against Green and Blue. The teammates support each other, and attack the other team together.
The game ends when someone gets checkmated. Then the checkmater team wins and the other team loses.
More detailed rules: Four-player chess. These variants differ only in the board and the movement of the pieces. The general rules are the same.
Before opening the box, ensure your host computer meets the necessary specifications to run the QRMA software smoothly. Version 4.3.0 is not resource-heavy, but compatibility is key.
| Do | Don’t | | :--- | :--- | | Store the probe in its anti-static sleeve. | Drop or bend the probe cable. | | Clean the gold tip with 70% isopropyl alcohol after each patient. | Use abrasive cleaners (they remove the gold plating). | | Perform a factory calibration monthly (Settings → Factory Reset → Calibrate). | Leave the analyzer plugged in 24/7 (the oscillator drifts). | | Keep a log of COM port assignments per USB port. | Connect to a USB hub (use direct motherboard ports). | Quantum Resonance Magnetic Analyzer -4- 4.3.0 Setup
Even with a perfect setup, issues can arise. Here are the fixes for the most common Version 4.3.0 errors: Before opening the box, ensure your host computer
| Issue | Probable Cause | Solution |
| :--- | :--- | :--- |
| "USB Device Not Recognized" | Driver conflict. | Uninstall the driver in Device Manager, reboot PC, and reinstall using the specific driver folder from the CD. |
| Software opens in Chinese | Language file reset. | Navigate to the installation folder C:\...\Quantum Resonance\ and delete the config.ini file. Restart the app; it may reset to default or allow you to select language. |
| "Please Insert Key/Dongle" | Dongle not detected. | Remove the dongle, wait 5 seconds, and plug it into a different USB port. Wait for the drivers for the dongle to install. |
| Test Values are abnormal | Poor contact or movement. | Ensure the hand is clean (no lotion). Ask the client to hold the sensor firmly but without squeezing. Retest. |
| Error Code 003 | COM Port conflict. | Go to Device Manager > Ports (COM & LPT). Find the USB Serial Port. Right-click > Properties > Port Settings > Advanced. Change the COM Port Number to a lower number (e.g., COM2). | Even with a perfect setup, issues can arise
Do not skip this section. 80% of Quantum Resonance Magnetic Analyzer -4- 4.3.0 Setup failures originate from environmental or OS conflicts.