🔓 Forgot your #XMEye DVR password?
Here’s the best way to reset it in 60 seconds:
✅ Use the local monitor → Click "Forgot Password" ✅ Copy the 6-8 digit Security Code ✅ Use the official XMeye reset tool (email support) ✅ Avoid sketchy "crackers" – they steal your data.
RT to help a fellow CCTV owner! 📹🔁
Success Rate: 100% (Data loss) | Difficulty: 5/10
If you don't care about losing your recorded footage (or you have an SD card backup), a physical factory reset is the best guaranteed method.
Warning: This will delete all footage, user accounts, and network settings. It will reset the password to default (admin / 123456).
Success Rate: 70% | Difficulty: 3/10
Most official guides tell you to do this. It is annoying, but it is the safest way. You will need a PC or a smartphone with email access.
abc12345 or 123456789.Why this is the "best" for some: It takes 10 seconds. If it works, you don't need any tools. If it fails, move to Method 2.
If your DVR is connected to the internet, this is the most reliable way to reset without opening the hardware.
Process: On your DVR login screen, click the "Forgot Password" or "?" icon. Action: Open the XMEye app on your phone.
Verification: Navigate to the "Forgot Password" section in the app settings and scan the QR code displayed on your monitor.
Result: The app generates a temporary verification code. Enter this into the DVR to set a new admin password. 🛠️ Hardware Reset: For "Total Lockouts"
If the QR method fails or the DVR is offline, a manual hardware reset is the next best option. Note that this requires opening the device. CMOS Battery Removal: Unplug the DVR and open the outer casing. reset password xmeye dvr best
Locate the silver coin-cell battery (CR2032) on the motherboard and remove it for 30–60 seconds.
This often resets the system clock and sometimes clears the password to the default.
Internal Reset Button: Some newer XMEye boards have a tiny tactile button. Holding this for 15 seconds while powering on can trigger a factory wipe. ⌨️ Default Credentials to Try First
Before attempting a reset, verify if the DVR is still using factory settings. XMEye-based systems (like Sannce, Techage, or Annke) often use these defaults: admin (blank) Most common default. admin admin Common for older generic models. admin 123456 Secondary common default. 888888 888888 Local maintenance account. ⚠️ Expert Tip: Master Password Generators
If you can't use the app or hardware reset, you can use a "Super Password" based on the date displayed on your DVR's screen.
Tools: Third-party apps like CCTV Password Tools allow you to input the date shown on your DVR to generate a one-day master code.
Caution: Ensure the date on your DVR is correct for the generated code to work. Quick Summary Fastest: QR Code scan via the XMEye mobile app. Most Reliable: CMOS battery removal (Hardware reset). Set new password
Last Resort: Contacting the manufacturer (e.g., Sannce Support) with your device's serial number for a master reset code.
Do you have the serial number of the DVR or can you see the system date on the login screen? Resetting XMeye Passwords (DVR/ NVR/ IP Camera)
Here’s a concise feature specification for Reset Password on an XMEYE DVR (common for H.264/H.265 security camera systems):
Success Rate: 50% | Difficulty: 2/10
Some resellers (like certain Zosi and Night Owl models) hardcode a specific phone number reset option. This is rare in 2024, but check anyway.
If the app sends a verification code to one of those numbers... well, you can't get it. But sometimes, the "SMS reset" is a placebo that just unlocks the account. It's a long shot, but it has worked on older firmware.