What You Need:
Method 1: Using Free Adjustment Program (Popular)
Method 2: WIC Reset Utility (Paid but Reliable)
A resetter (also known as an adjustment program or waste ink counter resetter) is a small software utility that communicates directly with your printer’s EEPROM (memory chip). It forces the internal waste ink counter back to zero (0%). resetter epson l1110
Important distinction: A resetter does NOT physically clean or replace the ink pads. It only tricks the printer into thinking the pads are empty. If you reset the counter without maintaining the physical pads, ink will eventually leak inside your printer, causing motherboard failure.
If you own an Epson L1110, you have invested in one of the most reliable ink tank printers for high-volume, low-cost printing. However, like all Epson printers, the L1110 comes with a hidden clock: the Waste Ink Pad Counter. When this counter fills up, your printer will stop working and display a dreaded "Service Required" error. The only affordable, practical solution is using a Resetter for Epson L1110.
In this 2,000+ word guide, we will explain everything you need to know: what a resetter is, when you need it, where to download safe software, how to use it step-by-step, and what to do if things go wrong. What You Need:
Solution: Disable firewall/antivirus. Use a different USB port. Restart the printer in “Recovery mode” (hold power + paper button).
Some sellers offer a small USB device claiming to reset L1110.
Verdict: Avoid for L1110.
The L1110 doesn’t have a chip on its ink tanks. Most physical resetter keys are designed for cartridge-based models (like T664/T6641). They will not work on the L1110.
Purpose:
The printer has a waste ink counter. After many cleanings, it will stop working with a “Service Required” or “Parts inside at end of life” error. This resetter clears that counter so you can continue printing. Method 1: Using Free Adjustment Program (Popular)
Pros:
Cons:
If no resetter software works, you can physically remove the EEPROM chip (IC8 on the mainboard), read it with a CH341A programmer, and change hex values for the waste counters. This is extremely difficult for the average user – stick to the software resetter.