Samsung Ml 2160 Firmware Update -

| Issue | Possible solution | |--------|--------------------| | Utility doesn’t detect printer | Reinstall Samsung/HP driver, try another USB port, restart printer + PC. | | Update fails at 0% or 50% | Printer may already have latest version. Restart printer and try again. | | Printer is unresponsive after update | Turn printer off for 30 seconds, then on. If still dead, contact HP support (likely hardware failure). |

If you absolutely must update—perhaps because Windows 11 fails to print—proceed with the USB method and accept that you may need to buy a genuine Samsung toner cartridge afterward. For a printer that costs under $100 used, a firmware lockout often means it is more economical to replace the printer than to buy genuine toner.

Final Verdict: Check your current firmware, read the HP release notes carefully, and if you see the phrase “Added support for new cartridge security” or “Improved toner authentication,” avoid the update at all costs.

Have a specific experience with your Samsung ML 2160 after an update? Leave a comment below (on the original blog post). Your feedback helps other users make informed choices.

Updating the firmware for the Samsung ML-2160 downloading files from the official HP Support

site (which now manages Samsung printer support) and following a specific "drag and drop" installation method samsung.com 1. Preparation & Compatibility Identify Your OS: samsung ml 2160 firmware update

Ensure you know whether you are using Windows (XP through Windows 11) or macOS, as the support site requires this selection. Official Source: Only download firmware from official sources like HP Customer Support to avoid corrupting your device. Connection: Connect the printer directly to your computer using a

. Do not attempt a firmware update over a network or Wi-Fi connection to prevent interruptions. 2. Downloading the Firmware Samsung ML-2160 Laser Printer Software and Driver page on the HP site.

Select your operating system and version (e.g., Windows 10). Look for the section in the list of available downloads. next to the latest firmware version. 3. Installation Steps (Windows) Step 1: Extract Files: Most Samsung firmware downloads come in a compressed format. Right-click the downloaded folder and select Extract All Step 2: Enter Download Mode (If Required):

Some updates require the printer to be in "Download Mode." This typically involves turning the printer off, then holding the Stop/Clear button while powering it back on. Step 3: The Drag-and-Drop Method: Locate the firmware file (often ending in ) and the updater utility (often named usbprns2.exe or similar). firmware file and drop it directly onto the updater utility file Step 4: Programming: A command window may appear showing the progress. Do not turn off the printer

during this 1–2 minute process. The printer will typically reboot itself once finished. Critical Safety Tips Single Connection: Ensure only one printer Watch the progress bar – Do not interrupt

is connected to your computer during the update to prevent sending the firmware to the wrong device. Power Stability:

Ensure your computer and printer are plugged into a stable power source. A power cut during firmware writing can permanently "brick" (disable) the printer.

If the printer does not automatically reboot, wait at least three minutes after the software finish notification before manually restarting it. or finding the latest driver version for your operating system?

Feature: Samsung ML-2160 Firmware Update

Often, what users think requires a firmware update is actually a driver or software issue. Before you update firmware, try: If you absolutely must update—perhaps because Windows 11

"We’ve released an updated firmware for the Samsung ML-2160 that improves print stability and compatibility with modern OS versions. Before updating, please back up your printer settings, connect via USB, and ensure uninterrupted power during installation. Only download firmware from the official support site and follow the on-screen installer instructions. Contact support if you encounter issues."

Samsung exited the printer market in 2017, and HP has gradually phased out support for legacy Samsung models. It is increasingly likely that no new firmware updates will ever be released for the ML 2160. The last official update was around 2018–2019. For most users, the version on their printer today is the version they will keep forever.

That’s not necessarily bad news. The ML 2160 is a mature, stable device. If it prints correctly today, it will likely continue to do so for years without any firmware changes.

Before you proceed, you must understand this: HP (which acquired Samsung’s printer business in 2017) has released firmware updates that permanently block the use of non-HP/Samsung brand toner cartridges.

If you currently use cheap, compatible, or refilled toners (e.g., MLT-D101S or MLT-D111S equivalents) in your ML 2160, installing the latest official firmware from HP may render your printer useless until you buy an original, more expensive Samsung/HP cartridge.