Transas Navi Sailor 4000 Test Answers Updated Official

Updated Answer:

Exam twist: Which motion mode is required for route planning? Answer: True Motion (so you see the actual geographic path of the vessel).

It's crucial to remember that proficiency in using navigation systems like the Transas Navi-Sailor 4000 is not just about passing tests but ensuring safe and effective navigation. Therefore, any learning or study materials should be used responsibly.

If you're preparing for a test or certification related to the Transas Navi-Sailor 4000, ensure you're using up-to-date and legitimate study materials. Always prioritize understanding the underlying concepts and procedures over memorizing answers.

This guide outlines key operational procedures and typical examination topics for the Transas Navi-Sailor 4000 ECDIS, current as of early 2026. This system, now managed by Wärtsilä, requires specific knowledge of its menu structures (F-keys) and safety configurations to pass type-specific training or vetting.  1. Preparation and Initialization 

Before any navigation or testing begins, ensure the system is properly initialized.  transas navi sailor 4000 test answers updated

Power On: Launch the system and verify the Transas Integrator window. Select the ECDIS button to open the main task.

Update Charts: Navigate to Main Menu → Chart Menu (F4) → Update Charts. Ensure all Electronic Navigational Charts (ENCs) include the latest weekly corrections.

Sensor Verification: Go to Monitoring Menu (F3) → Sensors. Confirm operational status for GNSS, Gyro, AIS, and Speed Log.  2. Safety Settings and Parameters 

This is a high-priority testing area. You must know how to calculate and apply safety values.  Access: Press F12 or go to Setup → Safety Settings. Safety Contour: Typically calculated as

. For example, a 10m draft with 2m UKC requires a 12m setting. Updated Answer:

Safety Depth: Usually set slightly less than the safety contour (e.g., 11m if contour is 12m) to distinguish deep water from potentially dangerous areas.

Shallow Contour: A critical "immediate action" depth (e.g., 7m).  3. Route Planning and Verification 

Test questions often focus on the sequence of creating and validating a passage. 

Create Route: Press F2 to enter Route Planning mode. Left-click on the chart to plot waypoints or use the Route Table for manual coordinate entry.

Route Check: Press Ctrl + R or select Check Route. The system will highlight navigational hazards, such as shallow depths or restricted zones. Exam twist: Which motion mode is required for

Activation: After saving (Ctrl + S), switch to Monitoring Mode (F3) and select your route from the Route List to activate it.  4. Common Examination Questions and "Cheat Sheet"  Transas Navi-Sailor 4000 ECDIS Guide | PDF - Scribd

Print this checklist and review it one hour before your exam:

The Navi-Sailor 4000 is a sophisticated piece of equipment used for navigation at sea. It combines various technologies to provide real-time information to sailors and officers on duty. The system includes features like:

In practical tests, you will be given a scenario. Here are three typical ones with the expected correct actions.