Solution: Go to Wipe > Format Data, type yes. Then reboot recovery. This removes old encryption.
The backup engine has been optimized. A full backup of /system, /data, and /boot now takes roughly 20–30% less time compared to TWRP 3.3.x.
twrp-3.6.0-9-on7xelte.tar is a custom recovery image specifically designed for the Samsung Galaxy J7 Prime Galaxy On7 Prime (codenamed
). This version of Team Win Recovery Project (TWRP) allows users to perform advanced tasks such as flashing custom ROMs, creating full system backups (Nandroid), and rooting the device. Key Features of TWRP 3.6.0
Version 3.6.0 introduced several major updates for compatible devices: Android 11 Support:
Enhanced compatibility for devices running newer Android versions. Improved Decryption:
Better handling of encrypted data partitions to allow easier file management. Simplified Installation:
New "Flash Current TWRP" option in the Advanced menu to simplify the update process for some devices. Installation Prerequisites Before flashing this
file, ensure the following settings are enabled on your device: Developer Options: Settings > About Phone > Software Info Build Number seven times. OEM Unlocking: In Developer Options, enable OEM Unlock
. This is critical for allowing custom partitions to be flashed. USB Debugging: USB Debugging to allow your PC to communicate with the phone via ADB. Flash Guide via Odin extension indicates this file is meant to be flashed using , Samsung's official firmware flashing tool for Windows. Enter Download Mode: Power off the device, then press and hold Volume Down + Home + Power buttons simultaneously. Press when prompted to continue. Setup Odin: on your PC and connect your phone via USB. Load TWRP: button in Odin and select the twrp-3.6.0-9-on7xelte.tar Configure Options: In the Odin "Options" tab, uncheck Auto Reboot
. This ensures the device doesn't overwrite TWRP with the stock recovery immediately after flashing. Flash and Boot: . Once finished, manually boot into recovery by holding Volume Up + Home + Power
After the first boot into TWRP, it is often necessary to flash a Disable_Dm-Verity_ForceEncrypt
zip file to prevent boot loops and ensure the data partition remains accessible. custom ROMs compatible with this recovery for your Galaxy J7 Prime?
The twrp-3.6.0-9-on7xelte.tar file is a custom recovery image designed for the Samsung Galaxy On7 Prime Go to product viewer dialog for this item. (codename: on7xelte) and related variants like the Go to product viewer dialog for this item.
(j7xelte). Version 3.6.0 was a significant update that introduced full support for Android 11, improved decryption, and streamlined installation for devices with A/B partitions. Core Features and Performance twrp-3.6.0-9-on7xelte.tar
Touch Interface: Unlike standard stock recoveries, TWRP provides a full touchscreen interface for easier navigation.
Android 11 Compatibility: This version handles the modern partition structures and encryption found in Android 11 more reliably than previous builds.
Decryption Support: It includes major improvements in handling encrypted data, which is crucial for accessing internal storage after a lock screen is set.
Dynamic Partitions: Version 3.6.0 handles dynamic partitions better, helping to prevent accidental bricking during the flashing process. Reported Issues
While generally stable for the on7xelte series, some users have reported specific bugs: Micro SD Mounting: In some builds of TWRP 3.6.0 for the
, the Micro SD card may fail to mount properly. Users often need to copy their flashing files (like Magisk or ROMs) to internal storage before booting into recovery.
Stock Overwrite: If you do not boot immediately into TWRP after flashing with Odin, the system may automatically replace it with the stock recovery. Installation Overview
To use this .tar file, you typically use a PC tool like Odin while your device is in Download Mode.
Check out these guides for visual walkthroughs of the flashing process and a look at TWRP in action:
This write-up covers the twrp-3.6.0-9-on7xelte.tar recovery image, specifically designed for the Samsung Galaxy J7 Prime (codename on7xelte). The .tar extension indicates this version is intended for flashing via a PC using the Odin tool. Device Overview: Samsung Galaxy J7 Prime (on7xelte) Codename: on7xelte Primary Models: SM-G610F, SM-G610M, SM-G610Y Chipset: Samsung Exynos 7870 TWRP 3.6.0 Features
Released in late 2021, TWRP 3.6.0 introduced significant updates, including:
Android 11 Support: Better compatibility for devices running newer Android versions.
Decryption Improvements: Enhanced handling of file-based encryption (FBE).
Terminal Emulator: A built-in terminal for advanced command-line operations. Preparation Checklist Before flashing, ensure you have the following ready: Solution: Go to Wipe > Format Data , type yes
How to Install TWRP Recovery on Any Samsung Device (2026 Guide)
TWRP 3.6.0 for Samsung Galaxy J7 Prime (on7xelte) TeamWin Recovery Project (TWRP) has updated its custom recovery to version , specifically tailored for the Samsung Galaxy J7 Prime
). This release is a major milestone, introducing compatibility with Android 11
and streamlining the installation process for modern partition schemes. What’s New in TWRP 3.6.0?
This version focuses on stability and broader support for newer Android versions. Key highlights include: Android 11 Support
: Full decryption and backup support for devices running Android 11. Flash Current TWRP
: A new "Advanced" menu option that allows users to permanently install the currently booted TWRP session without needing external scripts. Dynamic Partition Improvements
: Better handling of dynamic partitions to prevent accidental bricking during flashing. Refactored Codebase
: Significant internal updates that lay the groundwork for future Android 12 support. Installation Guide for on7xelte To install the twrp-3.6.0-9-on7xelte.tar
file on your Samsung Galaxy J7 Prime, follow these steps using a PC and the Preparation Developer Options by tapping "Build Number" 7 times in settings. OEM Unlocking USB Debugging
Back up all critical data, as unlocking the bootloader will wipe your device. Enter Download Mode : Power off your device. Press and hold Volume Down + Home + Power
buttons simultaneously until the warning screen appears, then press to continue. Flash via Odin Connect your phone to your PC. Open Odin and load the file into the In the "Options" tab, uncheck Auto-Reboot First Boot
: Once Odin shows "PASS", manually reboot into recovery by holding Volume Up + Home + Power
. It is critical to boot directly into TWRP before the system starts to prevent the stock recovery from overwriting it. Download Links The backup engine has been optimized
You can find the official builds and community-maintained versions at the following locations: Official TWRP for Galaxy J7 Prime on7xelte Builds on SourceForge Disclaimer:
Installing custom recovery voids your warranty and carries a risk of bricking your device. Proceed at your own risk. custom ROM like LineageOS to flash once your recovery is set up?
The file twrp-3.6.0-9-on7xelte.tar is a custom recovery image designed for the Samsung Galaxy J7 Prime (specifically model variants like the SM-G610F/M/G).
TWRP (Team Win Recovery Project) is a touch-based custom recovery that allows users to perform advanced tasks such as flashing custom ROMs, creating full system backups (Nandroid backups), and gaining root access. Key Details for this Version
Version: 3.6.0-9 is a later release for this hardware, offering improved compatibility with newer Android versions, such as Android 8.1.0 (Oreo).
Format: The .tar extension indicates it is formatted for flashing via Odin, the standard desktop tool used for Samsung device firmware.
Known Issues: In some builds of this specific version, users have reported a bug where the recovery cannot mount the Micro SD Card. To work around this, you may need to copy necessary files (like Magisk or custom ROMs) to the internal storage or use ADB Sideload. Important Safety Note
Flashing custom recovery images will trip the KNOX counter on your Samsung device, which permanently voids the hardware warranty and disables features like Samsung Pay and Secure Folder. Always ensure you have a full backup before proceeding.
As of 2025, TWRP has released versions up to 3.7.1. However, for the on7xelte, many maintainers stopped updating after 3.6.2. Version 3.6.0-9 remains the "golden build" for stability. Unless you are installing an Android 14 custom ROM that requires a newer recovery header, stick with this version.
Filename: twrp-3.6.0-9-on7xelte.tar
MD5: [Insert MD5 Checksum here if available]
Download Link: [Insert Link Here]
The file twrp-3.6.0-9-on7xelte.tar is an archive containing the Team Win Recovery Project (TWRP) custom recovery software tailored specifically for Samsung Galaxy devices identified by the codename on7xelte.
This specific version, 3.6.0-9, represents a significant update in the TWRP lineage, offering improved support for newer Android architectures and security features compared to older legacy builds. The .tar extension indicates that this is an uncompressed archive typically used for flashing via the Odin tool, which is the standard flashing utility for Samsung devices on Windows.
Before proceeding, let’s decode the filename. Understanding this nomenclature ensures you never download the wrong file for your device.
Using any other codename’s TWRP file (e.g., j7elte or on7nelteskt) can hard-brick your phone.
Even with perfect steps, issues can arise. Here is a troubleshooting table for twrp-3.6.0-9-on7xelte.tar:
| Problem | Likely Cause | Solution |
|--------|--------------|----------|
| Odin fails with “Auth” error | Bootloader still locked | Re-enable OEM Unlock, wait for the 7-day lock period on some Samsung firmware |
| TWRP boots but touchscreen doesn’t work | Wrong device variant | Confirm you have on7xelte (SM-J710). Do not force flash on7xelte on j7xelte |
| Can’t mount /data partition in TWRP | Encryption conflict after Android 11 upgrade | Use Format Data (not just Wipe) to remove FBE encryption |
| TWRP flashes but stock recovery returns | Auto Reboot was checked | Reflash with Auto Reboot unchecked; manually boot into TWRP immediately |
| “E: Unable to find partition size” | Corrupted TWRP download | Redownload the TAR file; verify checksum from the official source |
.