To download and install the TYSSO PRP-300 driver on Windows 10, use the official Fametech (TYSSO) Download Center
. While many manuals reference older versions of Windows, the current driver packages provided by the manufacturer support Windows 10 (32-bit and 64-bit). 🚀 Quick Start: Download Links Official Driver: Printer Driver for PRP-188, 250, 300, 350 (Requires WinRAR or 7-Zip to extract). Alternative Driver: Loftware NiceLabel Tysso Drivers (Optimized for Windows applications). www.tysso.com.tw 🛠️ Step-by-Step Installation Guide 1. Preparation Connect your printer to the computer via Ensure the printer is plugged into a power outlet but kept until prompted. Load a thermal paper roll (80mm) into the printer. img.pospartner.cz 2. Run the Driver Setup Locate the downloaded file (usually named SetupPRP.exe PRPDRVEN.exe Right-click the file and select "Run as administrator" to begin the process. img.pospartner.cz 3. Configure Connection Settings OS Selection: Windows 10
(or the highest available version, such as Win8/Win7, as they are often compatible). Interface: Choose your connection type:
The most common; Windows usually assigns a "Virtual COM" or "USB" port. TCP/IP (Ethernet):
Enter the printer's IP address (must be on the same subnet as your PC). Serial (RS-232): Select the correct COM port (e.g., COM1). Target Integration 4. Finalizing Installing Thermal Printer PRP-300 on Windows -
Note: TYSSO is a brand typically associated with receipt printers, label makers, or POS peripherals. If the PRP-300 is a receipt printer, the driver is often a generic ESC/POS driver. The following post is structured to solve that specific search intent safely.
Contact the original reseller or check these archived driver packs:
| Potential Real Manufacturer | Driver to Search For | Compatibility | |----------------------------|----------------------|----------------| | Bixolon | SRP-275III Windows Driver | 95% match | | Citizen | CT-S310II Driver | 90% match | | Star Micronics | TSP650 Driver | 80% match (different cutter command) | | Epson | TM-T88V Driver | 100% ESC/POS compatible | tysso prp-300 driver download windows 10
Final resort: Download the "Unified POS Driver Pack" from the POSWorld forum (archive.org mirror) – This contains every OEM driver for Tysso, Partner, and Posiflex models from 2015–2020.
Because TYSSO drivers are not publicly archived, your best bet is to:
Need the exact TYSSO PRP-300 driver file?
Check the original CD or contact the vendor you purchased from. Unfortunately, due to copyright and safety concerns, we do not host direct driver downloads.
Last updated: 2025 – Compatible with Windows 10 21H2, 22H2, and Windows 11 (via compatibility mode).
To download and install the driver for the Tysso PRP-300 high-speed thermal receipt printer on Windows 10, follow the guide below. 1. Download the Driver The official driver is provided by FAMETECH INC. (the manufacturer of TYSSO). Official Download Link: Printer Driver for PRP-188/250/300/350 Alternative Source: For advanced label design and cloud printing, you can use Loftware's Free Tysso Printer Driver , which supports Windows applications. www.tysso.com.tw 2. Installation Steps for Windows 10 Follow these steps to ensure a successful setup: Preparation:
Ensure the printer is connected to your PC via USB, Serial, or Ethernet but keep it powered off initially. Run as Administrator: Locate the downloaded setup file (often named SetupPRP.exe PRPDRVEN.EXE ). Right-click the file and select "Run as administrator" to prevent permission issues. Select OS & Model:
Choose "Windows 10" (or the most recent version available in the installer) and select as the model. Interface Configuration: To download and install the TYSSO PRP-300 driver
Select your communication interface (USB, Serial, or TCP/IP).
If using USB, the system will prompt you to turn the printer on. Once powered on, the driver installation should complete automatically. Verify Installation: Devices and Printers in your Control Panel.
The printer should appear as "PRP 300" or "THERMAL Receipt Printer". Right-click the printer, select Printer Properties , and click Print Test Page to verify it is working. img.pospartner.cz 3. Troubleshooting & Maintenance Port Settings: If the printer does not print, go to Printer Properties > Ports
and ensure the correct port (e.g., USB001 or the correct COM port) is selected. Cutter Reset:
If the auto-cutter jams, turn the printer off and then back on; the cutter should automatically reset to its initial position. For detailed hardware setup, refer to the PRP-300 Instruction Manual Printer Driver of PRP-188 PRP-250 PRP-300 PRP-350 - tysso
This is a niche hardware query, as the Tysso PRP-300 is a specialized POS (Point of Sale) receipt printer (often a rebranded model from manufacturers like Bixolon, Epson, or Citizen). Finding drivers requires a targeted approach because Tysso does not maintain a broad public driver repository.
Here is a solid, actionable feature guide to locate, verify, and install the correct driver for Windows 10. Contact the original reseller or check these archived
If the official TYSSO driver is corrupted or unavailable, use a generic ESC/POS driver. The PRP-300 emulates the Epson ESC/POS command language, which is industry standard.
Fix: Manually point to the .inf file as shown in Method 2. Windows 10 often blocks unsigned drivers. Restart with Disable Driver Signature Enforcement (Hold Shift + Restart → Troubleshoot → Advanced → Startup Settings → Disable driver signature enforcement).
If you’re using POS software (like Loyverse, Square, or NCR), you may need OPOS drivers:
Unlike HP or Canon, Tysso is an OEM distributor. You will rarely find a simple PRP-300.exe file on a clean website. Instead, you must identify the underlying chipset.
Quick ID Check: Look at the sticker on the bottom of the printer.
Verdict: 90% of PRP-300 units use ESC/POS (Epson Standard Code for Point of Service) drivers.
If you are using a full POS system (like RMS, NCR Silver, or LS Retail), you need OPOS (OLE for POS) drivers, not just Windows print drivers.
Where to find OPOS for Tysso PRP-300: