Multi Communication System Reset: Mitsubishi

A blown fuse can cut power to the MMCS. Locate your interior fuse box (usually under the driver’s side dash or behind the glove box). Look for fuses labeled AUDIO, RADIO, MMCS, or CIGAR (cigarette lighter often shares a circuit). Replace any blown 10A or 15A fuse.

If the method above does not work, try this sequence commonly found on Pajero and older Outlander models. mitsubishi multi communication system reset

| Scenario | Action | Time Required | | :--- | :--- | :--- | | Static remote, no lights | Soft Reset (Breaker off/60 seconds/on) | 5 minutes | | Error Code E6 / E7 | Soft Reset + check TB5 wiring polarity | 10 minutes | | Remote beeps but no reaction | Hard Reset (SW1-1 on power up) | 15 minutes | | Lightning strike nearby | Hard Reset + replace communication fuse | 20 minutes | A blown fuse can cut power to the MMCS

If you cannot access a breaker, or if the system is stuck in "Standby" mode due to a remote conflict, use the remote itself. | Scenario | Action | Time Required |

If your screen remains black or shows distorted colors after a reset: